1. Backflow Preventer Replacement Made Easy BY: Kenny Robbins

2. Have you ever had to call a plumber for something and end up having to spend a small fortune?

3. Stop Wasting Your Money!!!

4. There is one item that 99 out of 100 homes all have… A Backflow Preventer

5. Backflow Preventers Prevents water inside culinary or landscape piping from re-entering the city underground water supply. Contaminates can grow in water systems in homes, landscape, or farming piping. They are quarantined within that system if the backflow preventer is working properly. If not, the contaminates can affect others around you This is why backflow are so important to our society.

6. What you’ll need Tools Material Proper order of operations.

7. Tools street key, measuring tape, channel locks, screw driver, pipe wrench

8. Material: Backflow preventer, Teflon Tape, Extra Pipe, Pipe Unions

9. Installation

10. Installation -Locate water shut off valve -Use street key to shut underground water supply valve to backflow

11. Use flat screw driver to release pressure in piping from the test ports on the backflow

12. Use pipe wrench to loosen pipe unions on either side of the backflow preventer to remove defective backflow

13. Use measuring tape to measure the length of the old backflow and piping to compare to the new backflow to ensure it fits.

14. Removing piping from ends of old backflow and install into new backflow with pipe wrench. Use channels locks if necessary. Use teflon tape on threads of pipe to prevent leaking

15. Place new backflow in place where the old one was removed

16. Screw pipe unions back onto the existing piping and tighten with pipe wrenches

17. Turn water on SLOWLY with the street key used to shut water off originally

18. Check for leaks

19. Finish by fully turning on water and close underground water cap

20. Success! You have successfully replaced your first backflow preventer.