Understanding Features Presented by: Derricke Gray.

Understanding Features Presented by: Derricke Gray

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 2 @BentleyCivil Understanding Features Now that features live in a DGN environment, it is paramount to learn how they are used in the new OpenRoads technology to identify, name, and symbolize designs to meet an organization's standards. This presentation is meant to familiarize you with this new functionality. At the end of this training session, an assessment will be given. We will review all assessment questions and answers to see what you have learned.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 3 @BentleyCivil Learning Objectives After this presentation you will be able: Identify the valid feature types Link Civil Features to legacy style files Understand how to use DGN Libraries to setup and control civil features

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 4 @BentleyCivilFeatures What is a “ Feature ”? –At it’s simplest, a Feature is anything in your design that represents a real-world entity. Curb and Gutter Asphalt Pavement Manhole Wall Aggregate Base R/W Marker Ditch Fill Slope Etc.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 5 @BentleyCivil Feature Definitions What is a “ Feature Definition ”? –Properties used to define how a feature is to be displayed, annotated, computed, etc.. –These are normally customized by each organization. –These are normally created in advance and propagated across an organization in order to standardize designs.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 6 @BentleyCivil Types of Feature Definitions 3 types of feature definitions are supported. – Point Feature R/W Marker Control Point Iron Pin – Linear Feature Curb & Gutter Wall Ditch – Surface Feature Existing Ground Aggregate Base Asphalt Pavement

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 7 @BentleyCivil Types of Feature Definitions Depending on its type, a feature definition will have various properties that are available for definition. Point Linear Surface

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 8 @BentleyCivil DGN Libraries Feature definitions reside in DGN Files/Libraries. – DGN Libraries (optimal) Allows for propagation of standards across an organization – DGN Files Can be created directly in DGN file, but this is not the recommended procedure Note: When a feature definition is used from a DGN Library, the feature definition will be copied into the DGN file. This is standard MicroStation functionality (e.g. levels, line_styles, fonts, etc.).

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 10 @BentleyCivilCivil_ContentManagementDGNLiblist This variable is used to define which specific DGN Libraries are to be used to define your features. If this variable is not set, then all the DGN Libraries will be read and any that contain features will be listed.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 11 @BentleyCivil Project Explorer Feature Definitions are created, modified and reviewed in MicroStation’s Project Explorer application. – MicroStation File > Project Explorer > Civil Standards – Note: Tab Display Controlled by Settings > Project Explorer

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 12 @BentleyCivil Project Explorer The Civil Standards tab will show you what Feature Definitions are contained in your current file, as well as those in any specified DGN Libraries. Current File DGN Libraries

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 13 @BentleyCivil Creating Feature Definitions How do I create a Feature Definition ? – Link To Native (automatic) InRoads – XIN File GEOPAK – DDB File, XML File (Survey) MX – PSS File – Manual Creation – Combination of both – Note: Feature Name MUST be unique

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 16 @BentleyCivil Link to Native (GEOPAK) Right-Clicking on any feature definition gives you access to multiple options, including the ability to review the properties.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 17 @BentleyCivil Link to Native (GEOPAK) Notice that the Feature Definition is automatically linked back to the native style in the DDB. This is where it would get the symbology properties, annotation properties, etc.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 18 @BentleyCivil Link to Native (GEOPAK) If you wish to override this automatic designation with another selection from the DDB, you can do this by simply selecting another item from the drop down.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 20 @BentleyCivil Link to Native (InRoads) Since the XIN has no categories/folders, none are available to be carried through to the Feature Definitions.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 23 @BentleyCivil Link to Native (InRoads) Right-Clicking on any feature definition give you access to multiple options, including the ability to review the properties.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 24 @BentleyCivil Link to Native (InRoads) Notice that the Feature Definition is automatically linked back to the native style in the XIN. This is where it would get the symbology properties, annotation properties, etc.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 25 @BentleyCivil Link to Native (InRoads) If you wish to override this automatic designation with another selection from your XIN, you can do this by simply selecting another style from the drop down.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 27 @BentleyCivil Link to Native (MX) Since the PSS has no categories/folders, none are available to be carried through to the Feature Definitions.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 30 @BentleyCivil Link to Native (MX) Right-Clicking on any feature definition give you access to multiple options, including the ability to review the properties.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 31 @BentleyCivil Link to Native (MX) Notice that the Feature Definition is automatically linked back to the native style in the PSS. This is where it would get the symbology properties, annotation properties, etc.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 32 @BentleyCivil Link to Native (MX) If you wish to override this automatic designation with another selection from your PSS, you can do this by simply selecting another style from the drop down.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 33 @BentleyCivilQuestion We mentioned earlier that there are three types of feature definitions; Point, Linear and Surface. When linking to a legacy feature file, how does the software determine what type each feature is?

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 34 @BentleyCivil Link to Native (GEOPAK) Surface – The DDB does not support any surface properties for feature definitions. – All features will be created as either Linear or Point. – Linear and Point features can be converted into Surface feature definitions after linking.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 35 @BentleyCivil Point –The following DDB entries will be created as Point types: Any DDB entry that has a “Cell Name” assigned. Link to Native (GEOPAK)

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 36 @BentleyCivil Linear –The following DDB entries will be created as Linear types: Any DDB entries that are a Default item Link to Native (GEOPAK)

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 37 @BentleyCivil Linear –The following DDB entries will be created as Linear types: Any Drafting Standard that has any combination of the Lines, Curves, Spirals, Stationing, Parcels or Profiles Drafting Standards enabled Link to Native (GEOPAK)

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 38 @BentleyCivil Linear and Point –The following DDB items will result in the creation of two feature definitions, a Linear and a Point type. A Default item with a Cell Name assigned. Link to Native (GEOPAK)

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 39 @BentleyCivil Linear and Point –The following DDB items will result in the creation of two feature definitions, a Linear and a Point type. A Drafting Standard with the Cell name assigned and any combination of Lines, Curves, Spirals, Stationing, Parcels or Profiles preferences enabled. Link to Native (GEOPAK)

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 40 @BentleyCivil Linear and Point –In this scenario, the Linear feature will maintain the original item name, while the Point feature will be appended with a “-Pnt” suffix. Link to Native (GEOPAK)

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 41 @BentleyCivil Link to Native (InRoads) Linear –All styles which have the Geometry Line, Curve or Spiral enabled are given a linear feature definition. –All styles which have the Surface setting for 3-D/Plan Display enabled are given a linear feature definition. Point –All styles where the Geometry Points is defined are given a point feature definition. Surface –All styles that have the Surface Setting for Components enabled are given a surface feature definition.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 42 @BentleyCivil Link to Native (InRoads) Names must be unique. As such, feature definitions that span multiple types will be organized as shown in the image below.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 43 @BentleyCivil Link to Native (MX) MX String dimensions dictate the resulting mapping to Civil Feature Definitions. Linear –All Feature strings are given Linear Feature Definitions –All Section Strings are given both Linear and Surface Feature Definitions Point –All Point String types are given Point Feature Definitions. Surface –MX Triangulation.pts stylesets are given a surface feature definitions.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 44 @BentleyCivil Link to Native (MX) Feature Names must be unique. As such, each Feature Definition may contain multiple Feature Types. Any Surface Definition Automatically maps to an Element Template not the native style.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 46 @BentleyCivil Link to Survey Right-click on the Feature Definitions tree and select Link Survey Feature Definitions. You will then be prompted to select the appropriate file.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 47 @BentleyCivil Link to Survey Note the Survey properties will be different as opposed to linking via the non-Survey features workflow. Link to Survey Link to DDB/XIN/PSS

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 48 @BentleyCivil Manual Creation of Feature Definitions A feature definition can be manually created at any point by right-clicking and selecting the desired option. The properties of the feature definition would then need to be set manually as well.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 49 @BentleyCivil Best Practice Linking to your legacy style files is intended to be a ‘starting point’ to help you get your feature definitions created quickly. Best practice is to do this once. After the initial linking has been done, any structural changes to the feature definition tree (new features, renaming of features, etc.) should be made directly in the DGN Lib. Note: An exception would be changes to symbology or annotation, which would be made in the legacy style file.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 50 @BentleyCivil Element Templates In addition to pointing a feature definition back to a legacy style in order to assign display properties, you also have the option of pointing to a MicroStation Element Template.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 51 @BentleyCivil Element Templates A MicroStation functionality which allows preconfigured definitions for display of MicroStation elements and civil features.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 52 @BentleyCivil Element Templates vs. Native Styles In some situations the Element Template is desirable as opposed to the Native Style Surfaces Feature Definitions used for Existing Terrain Models

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 54 @BentleyCivil Element Templates vs. Native Styles Note this is an either/or option. You cannot have both defined. If you try and select both it will ‘disable’ the Element Template and by default use the Native Style.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 55 @BentleyCivil Properties of Feature Definitions Let’s first take a look at the individual properties and how they work. Point Linear Surface

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 56 @BentleyCivil Feature Definition > Name Prefix Found in all 3 types ( Point, Linear and Surface ) This prefix would be used as the ‘default’ name prefix for any civil element placed using this feature.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 57 @BentleyCivil Plan Property Available for Point and Linear features Defines how the feature is to be displayed in a 2D view Allows for either Native Style or Element Template definition Auto Export (True or False) Auto Annotate (True or False)

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 58 @BentleyCivil Auto Export If set to True, then any geometry elements created using this feature will be automatically exported to the appropriate legacy coordinate geometry database (FIL, ALG, GPK). If set to False, then this export would not occur. ALG FIL GPK

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 59 @BentleyCivil Auto Annotate If set to True, then the horizontal geometry element will be annotated immediately whenever it is created or modified. If set to False, then annotation would not occur. Note: You MUST use a Native Style in order to produce annotation, as the specifications for the annotation are based on the native feature style.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 60 @BentleyCivil Auto Annotate (GEOPAK only) For Auto Annotate to function correctly the Auto Export MUST be enabled as well. MicroStation Drawing Scale must be set to a value that matches a value in the DDB Native Style being used.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 61 @BentleyCivil 3D Property Found in all 3 types ( Point, Linear and Surface ) Defines how a feature is to be displayed in a 3D View. For Point and Linear features, this property allows for either Native Style or Element Template definitions. However, for Surface features, it only allows for Element Templates.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 62 @BentleyCivil Profile Property (Surface) Defines how a profile cut from a surface is to be displayed in a Profile View (normally existing profiles). Allows for Native Style or Element Template definition No Auto Export Note: No Auto Annotate for Profiles in current version

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 64 @BentleyCivil Profile Property (Linear Feature Type) Defines how a profile with this feature (normally a proposed profile) is to be displayed in a Profile View. Auto Export functionality same as explained previously Allows for Native Style or Element Template definition Note: No Auto Annotate for Profiles in current version

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 65 @BentleyCivil Profile Property (Linear Feature Type) The profile is always in a child/parent relationship with a horizontal geometry element. As such, the feature of the profile will always be inherited from the horizontal geometry.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 66 @BentleyCivil Profile Property (Linear Feature Type) The profile symbology can be overridden at placement by the specification of an Element Template. After placement, the symbology can be overridden via the assignment of an Element Template in the Element Information dialog.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 68 @BentleyCivil Available for Linear feature definitions only When a profile with this feature is projected onto another element, the symbology specified here will be used to display it. Allows for Native Style or Element Template definition Projected Profile Property

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 69 @BentleyCivil Available for Linear feature definitions only Defines how a point representing the intersected profile with this feature is to be displayed in a Profile View. Allows for Native Style or Element Template definition Intersected Profile Property

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 70 @BentleyCivil Cross Section Property Available for Linear feature definitions only Defines how a feature is to be displayed in a dynamic cross section view as well as plans production cross sections Allows for Native Style or Element Template definition

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 71 @BentleyCivilQuestion Shouldn’t a Surface feature definition contain a cross section property as well? How will the software know how to display my existing and proposed surfaces on cross sections?

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 72 @BentleyCivil When cross sections are cut, the proposed elements take their symbology directly from the proposed 3D model. Cross Section View Display

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 73 @BentleyCivil The existing ground symbology is always taken from the 3D Property of the feature definition (which must be an Element Template ). For example, here someone has gone into Element Information and changed the triangles to ‘blue’. Cross Section View Display

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 75 @BentleyCivil That is because the symbology for the existing ground is being taken from the Element Template called out in the 3D property of the feature definition. Cross Section View Display

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 77 @BentleyCivil Automatically Create 3D Elements If this property is set to True, then this functionality is enabled for this particular feature definition. However, in order for this functionality to actually be applied at placement, the toggle on the Feature Definition Toggle Bar MUST be enabled as well.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 78 @BentleyCivil Automatically Create 3D Elements What does this property do? When you place a horizontal geometry element using a feature that has this enabled AND the Create 3D Automatically is enabled on the toggle bar, an existing ground profile and a best fit profile is automatically created for the element being placed. In addition, the best fit profile is made active, creating a 3D element.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 79 @BentleyCivil Corridor Template If this property is assigned a template, then this functionality is enabled for this particular feature definition. However, in order for this functionality to actually be applied at placement, both the Create 3D Automatically AND the Use Feature Definition Template toggles on the Feature Definition Toggle Bar MUST be enabled as well.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 80 @BentleyCivil Terrain Model Feature Type This property specifies how this feature should be treated – as a None, Break Line, Void or Boundary - should this feature ever be used in the creation of a Terrain Model.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 81 @BentleyCivil Create Template Geometry Specifies whether the 2D geometry should be created whenever a template containing this feature is used. If True, then the 2D geometry will be drawn. If False, then it will not be drawn.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 82 @BentleyCivil Create Template Geometry How does this work? Each point in a template is assigned a feature. This feature either has the Create Template Geometry functionality enabled or disabled.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 83 @BentleyCivil Create Template Geometry When a corridor is created, then if the Create Template Geometry is enabled for a feature, then the 2D geometry will be drawn. The resulting geometry is not ruled to the alignment, but it is ruled to the Corridor (i.e. if the Corridor updates the geometry will update as well) Feature = Road_EdgeOfPavement

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 84 @BentleyCivilSurvey If a feature is created using the Link Survey Features Definition option, the Is Survey option will automatically be set to True. Otherwise, it will be set to False. This is really a ‘flag’ that enables the software to quickly figure out which features are to be used as Survey Features and which are not.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 85 @BentleyCivil Survey > Native Style This is the link back to the native style, which contains all the information required for symbolization and annotation. Note that Element Templates are not allowed for Survey Feature Definitions, only Native Styles.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 86 @BentleyCivil Survey > Alpha Codes, Numeric Code The user can specify which Alpha and/or Numeric Codes are to be used to identify this particular feature.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 88 @BentleyCivil Survey > Terrain Model Attribute Specifies which attribute is to be assigned to this feature definition when it’s used in the creation of a terrain model.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 89 @BentleyCivil Surface Defaults Available in a Surface Feature Definition only. Specifies how the surface is to be treated with regard to earthwork volumes. MUST be assigned prior to the surface feature being drawn and sections being cut. If you assign it later, the surface/model needs to be re-processed and the sections re-cut.

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 90 @BentleyCivil Learning Paths: Ready-Made Training Plans Choose from: –Bentley recommendations –Configure your own Organizational Personal Select: –Product(s) and version(s) –Language –Training type Enroll team members in: –One learning path –Multiple learning paths

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 91 @BentleyCivil This session’s Learning Path: Here’s a link to a short learning path that includes this session and recommended modules that you may share with your colleagues:

http://Learn.Bentley.com © 2013 Bentley Systems, Incorporated 92 @BentleyCivilAssessment 1. Which of the following is not a valid feature type? a)Point b)Pipe c)Surface d)Linear Answer – b) Pipe 2. The option to link civil features to a legacy style file is found under which tab in Project Explorer? a)Survey b)Civil Model c)Civil Standards Answer – c) Civil Standards 3. True or False : Civil_ContentManagementDGNLiblist is the configuration variable that is used to point to the DGN Library containing features. Answer – True

Understanding Features Presented by: Derricke Gray

Understanding Features Presented by: Derricke Gray.

Similar presentations

Presentation on theme: "Understanding Features Presented by: Derricke Gray."— Presentation transcript:

Similar presentations

About project

Feedback

Log in

Auth with social network:

Understanding Features Presented by: Derricke Gray.

Similar presentations

Presentation on theme: "Understanding Features Presented by: Derricke Gray."— Presentation transcript:

Similar presentations

About project

Feedback