1. Porsche

2. View over Porsche Platz to Plant II and the Porsche Centre in Stuttgart-Zuffenhausen

3. Porsche Platz with Porsche Centre Stuttgart

4. The Porsche Classic and Exclusive Centre, Plant I

5. Works car sales in Stuttgart-Zuffenhausen

6. Arial View of the Zuffenhausen Works

7. The Body Shop

8. Welding the front of the car into shape

9. Production of the side section of the 911 Turbo

10. The clamping frame positions the side sections and floor assembly prior to welding

11. Welding the side components on the Boxster

12. After the welding process, laser sensors check compliance with the stipulated dimensions

13. Assembly of the Boxster's wing

14. Welding the door hinges to the 911's body

15. Compliance with the stipulated body dimensions is checked at the DEA measuring station

16. The bodies-in-white are transported via a conveyor belt bridge from the body shop to the paint shop

17. Paint Shop

18. Cathodic dip primer protects the 911 from corrosion

19. Application of preliminary filler coating to the Boxster's body

20. Minute flaws in a 911's filler coating are corrected by grinding

21. Only water-based paints are used for the top coat which lends the 911 its colour

22. Infrared radiator dries the water-based paint

23. Polishing the clear lacquer coating on the Boxster

24. Engine Assembly

25. In order to avoid subsequent imbalance, only connecting rods of identical weight are installed

26. Fitting the pistons in the cylinders on the Boxster engine

27. Fitting the cylinder head on the Cayenne engine

28. Fitting the bearing housing in the crankcase on the Boxster engine

29. Fitting the camshaft in the cylinder head

30. Bolting the connecting rod bearing cover into place

31. Upholstery

32. Approx. 235,000 m² of leather are used at Porsche annually

33. An employee checks the quality of the leather

34. A responsible task in the upholstery shop: Sewing the airbags

35. Experience and a good eye – the decorative leather seam is sewn with millimetre accuracy

36. Vehicle Assembly

37. A 911 on the skid

38. Skid belt

39. Cockpit in the pre-assembly area

40. Entire cockpit carrier unit

41. Fitting the cockpit

42. Finished installed cockpit (here: right-hand-drive version)

43. Window robot fitting the front windscreen

44. Window robot fitting the rear windscreen

45. Interior prior to installation of the high-quality carpet

46. Interior after fitting the high-quality carpet

47. Delivery of the axles

49. Engine block

50. The marriage

51. Fully installed engine

52. 911 prior to wheel fitting

53. Fitting the wheels on a Boxster

54. Fitting the roll-over modules on the Cabriolet

55. Fitting the hood

56. Door pre-assembly area

57. Door pre-assembly

58. Filling the vehicles

59. A 911 on the shaking roller

60. Leak test

61. Engineer Inspecting (Leak test)

62. Final Inspection

63. The Carrera GT Manufacturing

64. The Leipzig Factory

68. Mics.

69. Final Inspection

70. Roll Out