1. Tennessee SPI Objective: Evaluate a protocol to determine if the engineering design process was successfully applied. Notes Science Check for Understanding Apply the engineering design process to construct a prototype that meets given specifications. Essential Question(s) What is the process by which technology products are designed, tested, and produced? SPI 0807.T/E.2 Engineering Design Process Instructions for Students 1) Make sure you view this presentation in slideshow mode. 2) You can find instructions about how to do this by doing a Google search or by searching YouTube. 3) After you have it in slideshow mode, press the right-arrow keyboard button to advance through the presentation. 4) If you need help, please communicate with your teacher.

2.  …is different from the scientific method, but uses the same tools  …includes a design phase, testing phase, and production phase.  EDP is used to develop technology products and/or solutions. Engineering Design Process (EDP)

3. (Step 5A) Use/Sell the product (Step 2A) Pick the best design (Step 1A) Do research about this technology STEP 1: Identify and Research A Need STEP 3: Make A Prototype STEP 2: Develop Possible Solutions STEP 4: Test and Evaluate STEP 5: Modify and Retest Engineering Design Process (In 5 Steps with sub-steps)

4. (Step 5A) Use/Sell the product (Step 2A) Pick the best design (Step 1A) Do research about this technology STEP 1: Identify a Need STEP 3: Make A Prototype STEP 2: Develop Possible Solutions STEP 4: Test and Evaluate STEP 5: Modify and Retest EDP: (In list format)

5. Early Phone Prototype "Mark 1 Version" (EDP Step 1) Identify and Research A Need (EDP Step 2) Develop possible solutions (EDP Step 3) Build a prototype Engineering Design Process Was it a "life or death" need? What need did this technology address? What are some different features that they could have included in these early phones? What materials did they use when constructing these early phones?

6. Engineering Design Process Early Phone Prototype "Mark 2 Version" Early Phone Prototype "Mark 4 Version" (EDP Steps 4 and 5) Step 4: Test the prototype Step 5: Modify the prototype and re-test it Early Phone Prototype "Mark 3 Version" What improvements do you notice in the phones shown below?

7. Engineering Design Process (EDP Steps 4 and 5) Step 4: Test the prototype Step 5: Modify the prototype and re-test it What improvements do you notice in the phones shown below? Phone Prototype "Mark 5 Version" Phone Prototype "Mark 6 Version" Phone Prototype "Mark 7 Version"

8. Engineering Design Process (EDP Steps 4 and 5) Step 4: Test the prototype Step 5: Modify the prototype and re-test it What improvements do you notice in the phones shown below? Phone Prototype "Mark 8 Version" Phone Prototypes "Mark 9 Versions"

9. EDP in the Movies -From the movie “Ironman”

10. EDP in the Movies -From the movie “Ironman” Billionaire genius and weapons designer Tony Stark is captured by terrorists, and they want him to build a super-weapon. Instead he builds an armored exoskeleton to fight them. 1 st Prototype Mark 1 Version 3 rd Prototype Mark 3 Version

11. Prototypes are often called mark versions 3 rd Prototype Mark 3 Version 2 nd Prototype Mark 2 Version 1 st Prototype Mark 1 Version

12. Step 1: Identify a need  Why did Tony Stark build the "Iron Man" suit? Step 1A: Do Research about the technology  Did Tony do any research first? Step 2: Develop Possible Solutions  What are some other options he could have built instead? Step 2A: Pick the best design  Do you think the "Iron Man" suit was the best design? Step 3: Make a prototype  Where and how did Tony build his prototype(s) Step 4: Test the prototype  Where and how did Tony test his prototype(s) Step 5: Modify and re-test the prototype  How did Tony modify his prototype to make it work better? Step 5A: Use and/or sell the product  Did Tony sell his Iron Man armor? How did he use it? SPI 0807.T/E.2 Engineering Design Process