Presentation is loading. Please wait.

Presentation is loading. Please wait.

Educational Module #3: Spatial Analysis and 3D Analysis Emily M. Larkin and Dawn Wright Dept. of Geosciences, Oregon State University September, 2004 (Larkin.

Similar presentations


Presentation on theme: "Educational Module #3: Spatial Analysis and 3D Analysis Emily M. Larkin and Dawn Wright Dept. of Geosciences, Oregon State University September, 2004 (Larkin."— Presentation transcript:

1 Educational Module #3: Spatial Analysis and 3D Analysis Emily M. Larkin and Dawn Wright Dept. of Geosciences, Oregon State University September, 2004 (Larkin 2001)

2 Objectives On completion of the project, you should be able to: – –Create a new shapefile. – –Add data to a shapefile. – –Convert a bathymetry grid to a 3D display – –Complete viewshed and hillshade analyses – –Select features using the attribute table – –Buffer a shapefile. – –Define: Viewshed and hillshade

3 Hillshade Creates shading on a Digital Elevation Model (DEM) or a bathymetry layer to make it appear three-dimensional Appearance depends on the azimuth and altitude of the imaginary light source used. – –Azimuth—the direction from which the light is coming (north = 0°, east = 90°--most common = 315°) – –Altitude—the angle above the horizon of the light source (most common = 45°)

4 Hillshade

5 Viewshed Viewshed shows what can be seen from a certain point on the landscape (i.e. “what can I see from the top of this hill”) A set of points must be created to make a viewshed surface Spatial analyst determines what can be seen from those points.

6 Viewshed

7 3D Marine Mapping ArcMap makes 2D maps ArcScene makes 2.5D maps—cannot actually calculate volumes, but can draw in 3D, based on depth or elevation information. Other software, such as Fledermaus is required to make truly 3D maps

8 3D Marine Mapping Triangulated Irregular Network (TIN)—this is a file format that represents a surface in 3D. – –It is created from a surface, such as a bathymetry file. TIN of Fagaitua Bay

9 MPA Project There are three federal MPAs in American Samoa – –Fagatele Bay NMS – –National Park of American Samoa – –Rose Atoll National Wildlife Sanctuary* *This is the only no-take marine sanctuary in American Samoa

10 Marine Protected Area (MPA) Project Goals – –Produce a short (3-5 pages, double-spaced) proposal for a hypothetical marine protected area (MPA) – –Demonstrate the connection between GIS data on a computer screen and real-world problems

11 MPA Project Things to consider in your proposal: – –What kind of maps do you need? Make sure they are understandable for someone who is not familiar with GIS. – –Who might be affected by the MPA? – –Why does your area need to be an MPA? – –How you would address village concerns? – –What kind of fishing, if any, will you allow? – –How will you enforce the rules?

12 MPA Project Things to remember: – –This is a hypothetical MPA, not a proposal for a real one. – –There is no one right answer. – –You can create any kind of reserve you want as long as you can produce a strategy for getting your proposal accepted. – –You are free to use any resources you find helpful (e.g. Internet resources), just be sure to cite them.

13 Module #3 Bathymetry from Fagatele Bay National Marine Sanctuary (FBNMS) and Fagaitua Bay Hillshade, viewshed analyses for FBNMS 3D rendering of FBNMS Coral Reef Ecosystem Division ground- truth points for Fagaitua Bay


Download ppt "Educational Module #3: Spatial Analysis and 3D Analysis Emily M. Larkin and Dawn Wright Dept. of Geosciences, Oregon State University September, 2004 (Larkin."

Similar presentations


Ads by Google