1. Chapter One ： DALI100

2. Chapter Two ： Parameter of DALI100 2.1 Input ： 5V by USB ； Maximum Current 500mA ； Output ： 9.5-22.5V ； Maximum Current 250mA ； Power Consumption ： <=2.5W ；

3. Chapter Three ： Computer Interface of DALI100 3.1 Software Installation Double-click to install the software in the assigned local disk, usually disk C ； During installation, you may be told to install“.net FrameWork3.5” ， click “Agree” to install it. It takes about 5 minutes to finish the installation ； After installation, the icon can be shown on your computer desktop.

4. Chapter Four ： Use of the DALI100 4.1 Open the installed software of DALI master. Till Arp.16 th, 2014, the latest version is 1.3, which can be saw on the title bar on the upper left corner of the software. Later we will study the interface.

5. 4.2 DALI master 界面 TitleBar FunctionSwitchInterface Operation andDisplay Page USBConnection

6. 4.3 Interface Information 4.3.1 Title Bar shows the DALI Master software ， version 1.3 4.3.2 Function Switch Interface Control ： DALI dim and control page Group ： DALI group setting page Scenes ： DALI scene setting page Parameters ： DALI main parameter setting page ARC command ： DALI RGB static 、 dynamic control page Dali Commands ： DALI command debug page 4.3.3 USB Connection “ ”indicates the USB is not connected ； “ ”indicates the USB is connected ；

7. 4.4 Functions of the Function Switch Interface 4.4.1 Control Page (1)Address Choice combo box is used for choosing DALI address. There are three DALI addresses to be selected ， namely ： Broadcast Address ， Group Address and Short Address. The“Address choice”offers the users Broadcast Address and Group Address ， and Short Address is operated on the scanned device from the“DALI Device”. Broadcast Address Group Address

8. (2)DALI Device Combo Box indicates the DALI device DALI Master can at most connects 64 different address. The Green background color shows the scanned address by “Scan” “Scan” scans all the devices on the bus and allot each channel of each device a sole address. “addr detect”scans out all the addresses of DALI devices on the bus The Gray background color shows that the addresses that does not exit

9. (2) Differences between Scan and Add detect After“Scan”is clicked, the originally stored address will be erased, a random address alloted by DALI Master will take its place. The range of the random address will be among 0- 63, possibly be the same with the original one, but in most cases, it will be changed. “Addr. detect”will only shows the existance of the DALI device. If exists, the address will be shown with Yellow background color, without changing the original address.

10. (2)The Interface of Scan and Addr detect The purple color and blue color indicate certain online DALI device is selected. Scan Addr detect

11. (3) Modify short address combo box Some addresses have been scanned out with the former operation ， now users can allot a new address with clicking“Modify short address”. Users can click “Addr detect” to check if they have successfully modify the address.

12. (4) Console Combo Box After selecting any one of the three addresses, users can operate the dimming function here. Bright a level The minimum brightness Turn off the lamp Dim a level The maximum brightness 0-254 dimming level 100% brightness 75% brightness 50% brightness 25% brightness 0% brightness Automatic shift of 16 scenes Shift interval of the adjacent two scenes Go to the set scene Dim a level and turn off Turn on and bright a level

13. (5)Status Combo Box It indicates the various status of the lamps.

14. 4.4.2 Group Page Address of the online device Read the groups that certain channel of certain online device have joined in. Save the groups that certain address has joined in.

15. 4.4.3 Scene Page Address Selection Read the scene that online device has been set Scene Setting Save the scene that online device has been set

16. 4.4.4 Parameter 页面 Address Selection Brightness when power on Brightness when failing dimming Minimum dimmable brightness Maximum dimmable brightness Fade time Fade rate Read the parameter of online device Set the parameter of online device

17. 4.4.5 ARC command 页面 RGB Address Setting Color Indication Dynamic Color Adjustment

18. 4.4.6 Dali commands DALI Command Selection DALI Address Selection DALI Command Sending