Presentation is loading. Please wait.

Presentation is loading. Please wait.

Forensic Analysis of Glass SFS1. Students will recognize and classify various types of evidence in relation to the definition and scope of Forensic Science.

Similar presentations


Presentation on theme: "Forensic Analysis of Glass SFS1. Students will recognize and classify various types of evidence in relation to the definition and scope of Forensic Science."— Presentation transcript:

1 Forensic Analysis of Glass SFS1. Students will recognize and classify various types of evidence in relation to the definition and scope of Forensic Science. b. Distinguish and categorize physical and trace evidence (e.g. glass). c. Determine the proper techniques to search, isolate, collect, and record physical and trace evidence. SFS2. Students will use various scientific techniques to analyze physical and trace evidence. b. Analyze the morphology and types of glass. e. Determine the appropriate uses of chromatography and spectroscopy in evidence analysis.

2 ESSENTIAL QUESTIONS 1.What is the forensic significance of glass? 2.How can types of glass be distinguished from each other? 3.How can glass be analyzed to determine the origin or composition?

3 What is Glass? An amorphous fusion of mineral compounds that produces a transparent solid when cooled. A 3D network of atoms which lacks the repeated, orderly arrangement typical of crystalline materials. Physical properties: hard, elastic, brittle, insulative (thermal and electrical) Chemical: resistant to all but fluorine and very strong bases

4 Soda-Lime Glass Most common and least expensive Windowpanes and containers 60-75% quartz sand (SiO 2 ) 12-18% sodium oxide (Na 2 O) – reduces melting point 12-15% quicklime (CaO) – increases durability Colors are due to impurities Types of Glass by Composition

5 Borosilicate Glass (Pyrex®) Cookware, laboratory glassware, light bulbs Lime replaced with boron oxide (B 2 O 3 ) – increases resistance to thermal shock Types of Glass by Composition

6 Lead glass (“crystal”) Decorative glassware, radiation protection Lime replaced with >20% lead oxide (PbO) – increases refractive index – reduces viscosity and melting point Types of Glass by Composition

7 Types of Glass by Manufacturing Flat glass Made by a “float glass process” where molten glass is floated on a pool of tin while cooling Commonly found in doors and windows.

8 Laminated glass Two sheets of glass with plastic between them. Used in windshield and skylights Types of Glass by Manufacturing

9 Tempered glass Treated by heating and quickly cooling float glass OR chemically treating the surface, replacing the Na+ with K+ Designed to be much tougher and shatter into tiny pieces rather than fracture Used in auto side windows, high stress areas Types of Glass by Manufacturing

10 Each force causes a deformation that may leave a visible mark or fracture the glass. This can be used to determine the direction and amount of force. Glass acts initially as an elastic surface and bends away when a force is applied. When the force increases beyond its tensile strength, it cracks. How Do Glass Windows Break?

11 Radial cracks form first and are propagated in short segments on the side opposite the force. Concentric cracks come later from continued pressure on the same side as the force applied. How Does Glass Break?

12 Edges of broken pieces of glass will show “stress” marks – Wallner lines. In a radial crack, the stress marks are perpendicular to unloaded side and parallel to loaded side.The arrow shows the side that received the impact. 3R rule: –Radial cracks form at –Right angles on the –Reverse side of the force

13 Exceptions to the Three R Rule Tempered glass “dices” without forming ridges Very small windows held tightly in frame can’t bend or bulge appreciably Windows broken by heat or explosion no “point of impact” curved, smooth edges at break points

14 Types of Fractures by Projectiles Bullets are a projectile force (load) that can pass through glass. –Load side is the entrance side; unloaded side is the exit side. –Low-speed projectiles: rib marks may indicate where breaking force was applied –As the bullet’s velocity increases, the central hole becomes smaller, cracking patterns become simpler, and the exit hole becomes wider than the entrance hole.

15 Fractures by Projectiles Stress lines on the glass edge of radial cracks form a right angle on the reverse side from the force. Stress lines on the glass edge of concentric cracks form a right angle on the same side as the force. Exit (unloaded) side is wider than entry (load) side. Which side was the bullet fired from?

16 Which Bullet Hole Was First? In the figure above, which impact occurred first? The sequence of impacts can be determined since crack propagation is stopped by earlier cracks.

17 Putting it Back Together Again? Examiners can fit together two or more pieces of glass that were broken from the same object. Because glass is amorphous, no two glass objects will break the same way.

18 Learning Check In the figure below & left, which impact occurred first? In the figure above & right, from which side did the impact occur?

19 Glass Transfer Evidence When glass objects are broken, glass flies backward from all parts of the object where cracks appear not just from point of impact. This creates a shower of minute glass particles and a transfer of evidence. Glass fragment comparison depends finding and measuring properties that will associate one glass fragment with another while eliminating other sources.

20 Collection of Glass Samples The glass fragments should be packaged in boxes to avoid further breakage. If evidence is to be examined for glass fragments, it should be taken whole and each item individually wrapped in paper and boxed. If even the remotest possibility exists that glass fragments may be pieced together, every effort must be made to collect all glass fragments. Submit glass evidence along with a representative sample of each type of glass from the crime scene.

21 Forensic Examination of Glass Goals in examining glass evidence: –Determine the types of glass at the scene –Determine how the glass was fractured –Use physical characteristics to classify it –Individualize the glass to a source Compare physical and chemical characteristics: –Optical properties: color and refractive index –Non-optical properties: surface wear, striations from manufacturing, thickness, surface film or dirt, hardness, density –Chemical properties: additives or trace elements

22 Optical Properties of Glass Make side-by-side comparisons using similar- sized fragments. Place samples on a white surface using natural light. Use both fluorescent and incandescent light to determine the glass’s color. Visual color analysis is very subjective. Dyes and pigments can be almost impossible to extract.

23 Nonoptical Physical Properties of Glass Surface striations and markings –Rollers leave parallel ream marks on sheet glass –Markings may indicate the glass’s orientation when pieces are missing –Surface scratches, etchings, and other markings may also be used to individualize evidence Other Properties –Hardness=5-6 on Mohs scale; use a scratch test. –Determinations of curvature can distinguish flat glass from container, decorative, or ophthalmic.

24 Forensic Analysis of Glass

25 Why Measure Density? Can be used as a screening technique with large numbers of fragments. Useful in identifying multiple sources present in the known and/or questioned samples. It is nondestructive and an intensive property (not dependant on sample mass). Need to measure very precisely in parts per hundred or thousand or better.

26 Glass Density Density can be measured by: directly determining mass and volume (usually by displacement) comparison by flotation comparison using a density gradient column Density gradient column method: Fragments of different densities settle at different levels in the column of liquid of varying density. Technique is not accurate for fragments that are cracked or contain an inclusion.

27 Density by the Flotation Method A glass particle is immersed in a liquid. The density of the liquid is adjusted by the addition of small amounts of another liquid until the glass chip remains suspended. At this point, the glass will have the same density as the liquid medium and can be compared to other relevant pieces of glass which will remain suspended, sink, or float.

28 Why Measure Refractive Index? Refractive index: ratio of the velocity of light in a vacuum to the velocity of light in any other medium For example, at 25 o C the refractive index of water is 1.333. This means that light travels 1.333 times faster in a vacuum than it does in water. Like density, refractive index is an intensive property but it can be measured very precisely (±0.0002) and does not destroy the sample. Refractive index of glass varies with small changes in composition or by how it is manufactured.

29 Refractive Index By Immersion

30 Immersing a glass particle in a liquid medium (silicone oil) whose refractive index can varied with temperature until it is equal to that of the glass particle. At this point, known as the match point, the Becke line disappears and minimum contrast between liquid and particle is observed: RI oil = RI glass. The Becke line is a bright halo near the border of a particle that is immersed in a liquid of a different refractive index.

31 Glass has higher refractive index – note white line inside Glass has lower refractive index – note white line outside Becke Lines

32 Histogram = flat glasses Curve = container glasses The measurement of RI alone can be of limited use because RI distributions of flat glasses and container glasses overlap. Problems with Refractive Index

33 Manufacturing changed in late 1970’s making glass more uniform 1964-1979 1980-1997 A rough statistical estimate of the likelihood of finding glass of a particular refractive index before 1970 Problems with Refractive Index

34 The FBI has compiled density and refractive index data for glass from around the world. The FBI has identified a relationship between their refractive indices and densities for 1400 glass specimens that is better at classification. FBI Refractive Index vs Density Data

35 Chemical Analysis of Glass Fluorescence –Under UV radiation, many glasses exhibit fluorescence (glow) – Caused by heavy metals (including tin) from “float” process or organic coatings Scanning Electron Microscopy Energy Dispersive X-ray Analysis –Can determine many elements simultaneously –Surfaces of samples (>50 mg) can be analyzed Atomic Absorption Spectroscopy –You must first know which elements are present –Can analyze ppm levels of elements present

36 The Wave of the Future: Laser Ablation Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS) –Laser burns off a microscopic sample –Elements are ionized by plasma –Detects 46 trace elements and their isotopes simultaneously in glass at < 1 ppb


Download ppt "Forensic Analysis of Glass SFS1. Students will recognize and classify various types of evidence in relation to the definition and scope of Forensic Science."

Similar presentations


Ads by Google