Presentation is loading. Please wait.

Presentation is loading. Please wait.

By Christian Grecco. Drill Press 5. Hold material securely with a vice or clamps. 6. Be sure the chuck key is removed from the chuck before starting the.

Similar presentations


Presentation on theme: "By Christian Grecco. Drill Press 5. Hold material securely with a vice or clamps. 6. Be sure the chuck key is removed from the chuck before starting the."— Presentation transcript:

1 By Christian Grecco

2 Drill Press 5. Hold material securely with a vice or clamps. 6. Be sure the chuck key is removed from the chuck before starting the machine. 7. Select a properly sharpened bit. For metal, center punch when a hole is to be drilled.

3 Drill Press 8. Turn off the power if the work piece becomes caught in the drill. Do not stop the chuck rotation by hand. 9. Adjust the table or depth stop to avoid drilling into the table. 10. Select the correct speed: Normally, slower for drilling metal, faster for wood. The larger the bit, the slower the speed.


Download ppt "By Christian Grecco. Drill Press 5. Hold material securely with a vice or clamps. 6. Be sure the chuck key is removed from the chuck before starting the."

Similar presentations


Ads by Google