1. CERN/CEA Collaboration agreement No. KE2275/TE WP4 – Nb 3 Sn technology development Meeting 04/09/2015

2. Content Mechanical characterization Dilatation tests – reduced scale Next steps Milestones 09/06/2015 FRESCA2 Expert meeting - Cable behavior duriong reaction 2

3. Tests campaign on reacted bare ten stacks confirmed thickness increase factor of 4% taken into account for tool dimensions Mechanical characterization 09/06/2015 FRESCA2 Expert meeting - Cable behavior duriong reaction 3

4. Mechanical characterization First insulated reacted ten stack (cable H11EC0146A - RUN 103A) sent at CERN beginning of April to be tested first with its insulation, then bare SPITN01 : reacted insulated PIT cable SPNTN05 : reacted bare cable to be used as the reference for PIT cable. 2 reacted stacks (cable H11EC0146A - RUN 103A) at Saclay waiting for impregnation SPITI01 and SPITI02 To be tested under full compression cycles at CERN 09/06/2015 FRESCA2 Expert meeting - Cable behavior duriong reaction 4

5. Mechanical characterization A dummy impregnation has been done end of July to validate FRESCA2 samples insert and procedure Modification of a part of the insert is needed to improve demounting process Few parts modification and new Teflon coating to be done 09/06/2015 FRESCA2 Expert meeting - Cable behavior duriong reaction 5 Impregnation test on an insulated Roebel dummy cable made at the same time

6. Mechanical characterization – Saclay tests Modification of the tooling for mechanical test at Saclay to be started this month Antoine Bonelli arrived on September 1st, temporary technician contract for 12-months. He will work on mechanical tests. 6 FRESCA2 Expert meeting - Cable behavior duriong reaction 09/06/2015

7. Dilatation tests – reduced scale First tests with insulated cable Cable end fixed to the tooling Cable end Free  Tooling modification New fixing system, to the mandrel  2 tests with the new tooling, PIT cable, ongoing 2 tests with the new tooling, RRP cable, foreseen for beginning of October (between CR3401 and CR1202) Report under work One Paper accepted for MT24 09/06/2015 FRESCA2 Expert meeting - Cable behavior duriong reaction 7

8. Next steps Cable dilatation campaign to be completed Test procedure validation Complete test campaign on PIT and RRP FRESCA2 cables Bare cable, new tools  compare with previous tests on bare cable Heat treatment steps More than one turn Longer SS Tests campaign (2-3 tests each) on QXF and 11T cables Mechanical characterization Impregnation of first two PIT ten stacks (this month) for tests at CERN Preparation and test of 2 more impregnated PIT samples for tests at Saclay Preparation of 4 impregnated RRP samples for test at CERN and at Saclay Mechanical tests at Saclay 8 FRESCA2 Expert meeting - Cable behavior duriong reaction 09/06/2015

9. Milestones N°Description Kick off meeting Today 4.1Mechanical test facilities designSeptember 2014Sept/Oct 2015 4.2Mechanical test facilities readyDecember 2014December 2015 4.3Dilatation tests report – preliminaryJuly 2014September 2015 4.4Dilatation tests report - finalDecember 2014December 2015 4.5Report on Mechanical tests at SaclayDecember 2015T1 2016 09/06/2015 FRESCA2 Expert meeting - Cable behavior duriong reaction 9