1. Sonexis Call Manager Step by Step Step by Step Table of Contents How to Complete a System Test Schedule a Conference Quick Link to Sonexis Sonexis

2. How to Complete a System Test

3. Go to the homepage: http://conferencing/Login/HostLogIn.asp?LO=1.http://conferencing/Login/HostLogIn.asp?LO=1 Select “System Test”

4. Note the host has a few addition system requirements, so select the “I’m a host” button.

5. Select the “Check My System” button.

6. If you are missing any requirements, make the suggested changes.

7. For instance, I “allowed” pop-ups just for this site and then re-ran the test.

8. Schedule a Conference

9. For those staff who have accounts, the ID and PIN are your phone extension.

10. Select the “Conference Later” button for a future call or “Conference Now” button to be directly connected once you finish imputing the call data.

11. Input the call data. See next slide for “Port Availability.” AIA shares 72 ports. AIA shares 44 ports. Will make WAV file.

12. Note that if you schedule a call to end at 4pm and all the ports are taken by other calls starting at 4pm, the system will end your call with a five and one minute audio warning.

13. Use the 12 digit budget code without the dashes. Select Custom Settings…

14. These are recommended settings, but see what works for you. No announcement = large calls By tone = smaller calls No announcement = large calls By tone = smaller calls This option is good if the host is bumped off the call or is disconnected.