1. SATELLITE MIGRATION PROJECT Contractor Orientation

2. SATELLITE FREQUENCY DAW-Mini 4400/5400 1.Press “menu” button and select “installation”. 2.Go to “factory reset” and press “ok”. 2

3. SATELLITE FREQUENCY DAW-Mini 4400/5400 3.Enter “access code”, default is “1234”.4.Select and press “ok”, wait for the Philippine Multi-Media System, Inc. Logo. 3

4. SATELLITE FREQUENCY DAW-Mini 4400/5400 5.The “first installation” prompt will appear, press “ok”. 6.Under “equipment” menu, select “none” and press “ok”. 4

5. SATELLITE FREQUENCY DAW-Mini 4400/5400 7.Under “channel search menu”, select “manual” by pressing “green button” on the remote control. 8.Select “Add TP” by pressing the “blue button” on the remote control. 5

6. SATELLITE FREQUENCY DAW-Mini 4400/5400 9.Select row of added TP (with check) and go to “freq” column, press “ok” to edit frequency. 10.Enter new frequency “12390” and press “ok”. 6

7. SATELLITE FREQUENCY DAW-Mini 4400/5400 11.Go to “S/R” column, press “ok” to edit symbol rate. Enter symbol rate “25600” and press “ok”. 12.Go to “pol” column, press “ok” to edit polarity to “v” (vertical). 7

8. SATELLITE FREQUENCY DAW-Mini 4400/5400 13.Repeat steps 8-12 but enter the frequency “12430” in step 10. 14.Repeat steps 8-12 but enter the frequency “12470” in step 10. 8

9. SATELLITE FREQUENCY DAW-Mini 4400/5400 15.Press “exit” on remote. Select “network” by pressing “yellow button” on the remote control. 16.Unit will perform “channel scan”, after completion press “exit”. 9

10. SATELLITE FREQUENCY DAW-Mini 4400/5400 17.A “warning” prompt will appear, press “ok” to save. 18.Press “exit” to view channels. 10

11. FORMS & FORMATS 11 JOB ORDER FORM Control No.: Installer Name : Dealer : Subscriber Name : Subscriber Contact No. : Address : Items Replaced : Low Noise Block (LNB) ConverterOthers : Antenna Dish Bracket RG-6 Cable I certify that that the Out-Door-Unit (ODU) has been re-aligned/relocated and my unit is working properly. Subscriber/Representative Name & Signature