1. Prostorquer working instructions Transferring prosthetic parts easily and safely with one hand Omplant Ltd.

2. 1 Press OUT to catch each one of the healing caps Omplant Ltd.

3. 2 Press IN one second to load the healing caps orderly into the organizer Omplant Ltd.

4. 3 Locate the abutment holder exactly on abutment shoulder * If you are using other than omplant’s abutment the holder is not useful,so use the driver only to the abutment’s screw. Omplant Ltd.

5. 4 Connect the driver *gently from angled position note: bit is still outside screw hex *match bit length to shoulder height Omplant Ltd.

6. 5 Press IN to let the bit enter into screw hex.Stop with click sound.

7. 6 Press OUT to open the abutment screw Omplant Ltd.

8. 7 Take the abutment “as is” to the implant Omplant Ltd.

9. 8 Press IN only after an abutment is set inside the internal hex, Stop with click sound Omplant Ltd.

10. check cast /porcelain on abutments,use the same manner 3-8 to transit the abutments back to analogues When finished, disconnect the holder Omplant Ltd.

11. 9 Press OUT to catch the healing caps from the organizer Omplant Ltd.

12. 10 Press IN to connect the healing caps back to implants. Stop with click sound. Omplant Ltd.