Presentation is loading. Please wait.

Presentation is loading. Please wait.

光電科技 LED: Materials and Device Aspects 授課教師 : 龔 志 榮 教授 國立中興大學物理學系 中華民國一○二年四月二十二日 1.

Similar presentations


Presentation on theme: "光電科技 LED: Materials and Device Aspects 授課教師 : 龔 志 榮 教授 國立中興大學物理學系 中華民國一○二年四月二十二日 1."— Presentation transcript:

1 光電科技 LED: Materials and Device Aspects 授課教師 : 龔 志 榮 教授 國立中興大學物理學系 中華民國一○二年四月二十二日 1

2 § 1-1 Optical Semiconductor Materials *Elemental semiconductors : Si, Ge, ( used in photodiodes only ) *Compound semiconductors Ⅲ - Ⅴ compounds & alloys Ⅳ compounds & alloys Ⅰ - Ⅲ - Ⅵ 2 compounds Ⅱ - Ⅳ - Ⅴ 2 compounds Ⅳ - Ⅳ compounds For applications in light emitting devices like LEDs and LDs as well as photodiodes ( solar cells & photodetectors ) 2

3 *Bonding and Band structure in semiconductors 3

4 4

5 5

6 6

7 Physical Properties of Optical Semiconductors 7

8 8

9 9

10 10

11 11

12 12

13 13

14 14

15 15

16 16

17 17

18 18

19 19

20 20

21 21

22 22

23 23

24 24

25 25

26 26

27 27

28 28

29 29

30 30

31 31

32 32

33 33

34 34

35 35

36 36

37 37

38 38

39

40 cross-section of diffusion fabricated LED

41 light emitting in the pn junction

42 42

43 EQE of LEDs in the visible spectrum

44 LED materialSubstrateTypeWavelength(nm)ColorEfficiency InGaNSapphireD370-680UV-RedMedium-High AlGaInPGaAsD560GreenMedium AlGaInPGaPD570GreenMedium AlGaInPGaPD590YellowHigh AlGaInPGaPD607OrangeHigh AlGaInPGaPD620-650RedHigh AlGaAsGaAsD650-675RedMedium Table 1: III-V semiconductor LEDs’ wavelength, Color and Efficiency

45 LED materialSubstrateTypeWavelength(nm)ColorEfficiency GaAsP:NGaPI589YellowLow GaAsP:NGaPI632RedLow GaAsPGaAsD649RedLow GaP I555GreenLow GaP:NGaPI565GreenLow GaP:N,NGaPI590YellowLow GaP:ZnOGaPI699RedMedium AlGaAs:SiGaAsD820-890IRHigh GaAs:SiGaAsD920-950IRHigh

46 Cross-sectional schematic of a flip chip ( 覆晶 ) GaN LED

47 InGaAs LED containing a photonic crystal

48 48

49 49

50 光電科技 LED: Recent Advances and Applications 授課教師 : 龔 志 榮 教授 國立中興大學物理學系 中華民國一○二年五月二十日 50

51

52 Internal Quantum Efficiency Enhancement 52

53 Cheng-Liang Wang, Jyh-Rong Gong,* Ming-Fa Yeh, Bor-Jen Wu, Wei-Tsai Liao, Tai-Yuan Lin, and Chung-Kwei Lin 53 IEEE Photonic Technology Letters 18 (2006) 1497 * Department of Physics, National Chung Hsing University, TAIWAN, R.O.C.

54 GaN-based LED structures w/wo SPSLs C. L. Wang et al. IEEE Photon. Tech. Lett. 18 (2006) 1497

55 DCXRD and EPD of GaN-based LEDs vs. SPSL set numbers C. L. Wang et al. IEEE Photon. Tech. Lett. 18 (2006) 1497

56 EL and I-V characteristics C. L. Wang et al. IEEE Photon. Tech. Lett. 18 (2006) 1497

57 InGaN/GaN multi-quantum wells A cross-sectional TEM image mapping of the SPSL-inserted LED structure 2 sets of short period superlattices 500nm 100nm u-GaN n-GaN p-GaN n-GaN C. L. Wang et al. IEEE Photon. Tech. Lett. 18 (2006) 1497

58 Current-voltage charateristics C. L. Wang et al. IEEE Photon. Tech. Lett. 18 (2006) 1497

59 59 Cheng-Liang Wang, Ming-Chang Tsai, Jyh-Rong Gong,* Wei-Tsai Liao, Ping-Yuan Lin, Kuo- Yi Yen, Chia-Chi Chang, Hsin-Yueh Lin, and Shen-Kwang Hwang * Department of Physics, National Chung Hsing University, TAIWAN, R.O.C. Materials Science & Engineering B 138 (2007) 180

60 According to the standard Shockley model, the I–V relationship of a forward-biased p–n junction can be approximated by I = Is exp(q V/ηkT), where Is, q, k, η and T, respectively, are saturation current of the diode, electron charge, Boltzmann constant, and ideality factor and absolute temperature of the diode. 60

61 Semilogarithmic I–V plots of the forward-biased In 0.2 Ga 0.8 N/GaNMQWLEDs having (a) zero-set, (b) one-set, (c) two-set, and (d) three-set Al 0.3 Ga 0.7 N/GaN SPSL insertion. C. L. Wang et al. MSE B 138 (2007) 180

62 Typical optical surface morphologies of etched In 0.2 Ga 0.8 N/GaN MQW LEDs having (a) zero-, (b) one-, (c) two-, and (d) three-set Al 0.3 Ga 0.7 N/GaN SPSL insertion. C. L. Wang et al. MSE B 138 (2007) 180

63 Typical I–V characteristics of the reverse-biased In 0.2 Ga 0.8 N/GaNMQW LEDs (1) without SPSL insertion, (2) with one set of Al 0.3 Ga 0.7 N/GaN SPSL insertion, (3) with two sets of Al 0.3 Ga 0.7 N/GaN SPSL insertion, and (4) with three sets of Al 0.3 Ga 0.7 N/GaN SPSL insertion, respectively. The inset exhibits plots of the corresponding EL intensity vs. emissionwavelength of the two LEDs having no SPSL and two sets of SPSL operated at 20 mA.

64 C. L. Wang et al. MSE B 138 (2007) 180

65 Wei-Tsai Liao, Jyh-Rong Gong,* Cheng-Liang Wang, Wei-Lin Wang, Chih-Chang Tsuei, Cheng-Yen Lee, Keh-Chang Chen, Jeng-Rong Ho, and Ren C. Luo 65 Electrochemical and Solid-State Letters, 10 1 H5-H7 (2007) * Department of Physics, National Chung Hsing University, TAIWAN, R.O.C.

66 Typical 0002 DCXRD curves of the In 0.1 Ga 0.9 N/Al 0.03 Ga 0.97 N MQW LED structures grown on c- and a-plane sapphire substrates. Insets: the corresponding XTEM micrographs of the LEDs near MQW area, respectively W. T. Liao et al. Electrochem. Solid-State Lett. 10 (2007) H5

67 Characteristics of the In 0.1 Ga 0.9 N/Al 0.03 Ga 0.97 N MQW LEDs grown on c- and a-plane sapphire substrates W. T. Liao et al. Electrochem. Solid-State Lett. 10 (2007) H5

68 Plots of EL intensity vs forward current of the In0.1Ga0.9N/Al0.03Ga0.97N MQW LEDs grown on c- and a-plane sapphire substrates. Inset: a typical room-temperature EL spectra measured at 20 mA for the In0.1Ga0.9N/Al0.03Ga0.97N MQW LEDs grown on c- and a-plane sapphire substrates. W. T. Liao et al. Electrochem. Solid-State Lett. 10 (2007) H5

69 Typical FESEM surface morphologies of the etched In 0.1 Ga 0.9 N/Al 0.03 Ga 0.97 N MQW LEDs grown on a c- and b a-plane sapphire substrates W. T. Liao et al. Electrochem. Solid-State Lett. 10 (2007) H5

70 External Quantum Efficiency Enhancement 70

71 Kuo-Yi Yen, Chien-Hua Chiu, Chun-Wei Li, Chien-Hua Chou, Pei-Shin Lin, Tzu-Pei Chen,Tai-Yuan Lin, and Jyh-Rong Gong* 71 * Department of Physics, National Chung Hsing University, TAIWAN, R.O.C. IEEE PhotonicTechnologyLett.ers 24 (2012) 2105

72 72

73 Typical I-V curves of (a) N 2 -annealed n + -GZO contacts along with an ITO contact on p-GaN/sapphire templates and (b) forward-biased InGaN/GaN MQW LEDs with an as-deposited n + -GZO TCL, an ITO TCL and n + -GZO TCLs being N 2 -annealed at 400 °C, 500 °C, 600 °C, 700 °C, and 800 °C. K. Y. Yen et al. IEEE Photon.Tech.Lett. 24 (2012) 2105

74 Schematic showing electron tunneling in a reverse-biased n + GZO/p-GaN hetero-junction K. Y. Yen et al. IEEE Photon. Tech. Lett. 24 (2012) 2105

75 K. Y. Yen et al. IEEE Photon.Tech.Lett. 24 (2012) 2105 (a)–(f) θ-2θ XRD plots of as- deposited n + -GZO TCL and n + -GZO TCLs on GaN/c-sapphire substrates being annealed at 400 °C, 500 °C, 600 °C, 700 °C, and 800 °C for 5 min in N 2 ambient.

76 Light output powers of InGaN/GaN MQW LEDs with as-deposited n + -GZO, 400 °C N 2 -annealed n + -GZO and commercial ITO TCLs K. Y. Yen et al. IEEE Photon. Tech. Lett. 24 (2012) 2105

77 Optical transmittances of as-deposited n + -GZO, 400 °C N 2 -annealed n + -GZO and ITO films deposited on c-sapphire substrates K. Y. Yen et al. IEEE Photon. Tech. Lett. 24 (2012) 2105

78 78

79

80

81

82


Download ppt "光電科技 LED: Materials and Device Aspects 授課教師 : 龔 志 榮 教授 國立中興大學物理學系 中華民國一○二年四月二十二日 1."

Similar presentations


Ads by Google