1. 1 * * * Updated for NTS software version 4.1.30, 2011-07-01 * * *

2. 2 Part 2a: Local Server Configuration and Set-up Note: All NTS logins are held by your local NTS administrator, contact them for the user names and passwords (anything labeled “Entry #1”, “Entry #2”, “Entry #3”, etc.)

3. 3 Setting Up Local Server Note: “Administrator” access required to perform this task. 1.When “warning banner” appears, on keyboard, press and hold Shift then Enter. The NTS Log-in pops up. 2.Put Entry #1 for “user name” and Entry #2 for the “password” (get from NTS admin) 3. Select OK.

4. 4 Setting Up Local Server Note: “Administrator” access required to perform this task. 4.On the next pop- up, select OK. Note: May take 2 or 3 minutes to pop-up

5. 5 Setting Up Local Server Note: “Administrator” access required to perform this task. 5.In the Encryption Plus pop-up put Entry #3 for “user name” (enter twice) and Entry #4 for “password” (enter twice). 6.Select Next

6. 6 7.Select Next 8.Select Hide on final Encryption pop-up. 9.Restart Computer Setting Up Local Server Note: “Administrator” access required to perform this task.

7. 7 After laptop restarts…the screen below appears. THEN…

8. 8 Setting Up Local Server Note: “Administrator” access required to perform this task. Next screen appears Press Enter on keyboard. Put Entry #3 for “user name” Put Entry #4 for “password”

9. 9 Setting Up Local Server Note: “Administrator” access required to perform this task. 1.When “warning banner” appears, on keyboard, press and hold Shift then Enter. The NTS Log-in pops up. 2.Put Entry #1 for “user name” and Entry #2 for the “password” (get from NTS admin) 3. Select OK.

10. 10 1. 1. 2. 2. 3. 3. 4. 4. Right Click 5. 5. Click Select Set Wireless IP for ECC Local Server (Hardware)

11. 11 Set Wireless IP for ECC Local Server (Hardware) 6. 6. Select 7. 7. Select New Pop-up

12. 12 Set Wireless IP for ECC Local Area Network (Hardware) Note: Local Server and Registration All of the Notebook Computers must have an identical Wireless IP Address except for last digit set. IP Address series below is an example for site operating with 1 Local Server and 4 Registration Workstations. Local Server: 10.2.2.1 Registration Workstation 1: 10.2.2.2 Registration Workstation 2: 10.2.2.3 Registration Workstation 3: 10.2.2.4 Registration Workstation 4: 10.2.2.5

13. 13 Set Wireless IP for ECC Local Area Network (Hardware) Note: Local Server and Registration IP Address series below is an example for a site operating with 2 Local Server and 2 Registration Workstations each: Local Server 1: 10.2.2.1 Registration Workstation 1: 10.2.2.2 Registration Workstation 2: 10.2.2.3 Local server 2: 10.3.3.1 Registration Workstation 3: 10.3.3.2 Registration Workstation 4: 10.3.3.2 Note: Ensure Server separation distance 100ft min.

14. 14 Set Wireless IP for ECC Local Server (Hardware) 10. 2. 2. 1 Type in 255. 255. 255. 0.2,.3, etc Remains same for all Select

15. 15 Set Wireless IP for ECC Local Server (Hardware) Select Wireless is now connected. CloseCancel The next screen appears.