Presentation is loading. Please wait.

Presentation is loading. Please wait.

Doc.: IEEE 15-08-0322-00-r1 Submission May 2008 Tuncer Baykas,NICTSlide 1 Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs)

Similar presentations


Presentation on theme: "Doc.: IEEE 15-08-0322-00-r1 Submission May 2008 Tuncer Baykas,NICTSlide 1 Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs)"— Presentation transcript:

1 doc.: IEEE 15-08-0322-00-r1 Submission May 2008 Tuncer Baykas,NICTSlide 1 Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs) Submission Title: [Resolutions for SC-PHY Modulation and Spreading Comments ] Date Submitted: [May, 2008] Source: [Tuncer Baykas] Company [NICT] Address [Yokosuka,Japan] Voice:[], FAX: [], E-Mail:[tuncerbaykas@nict.go.jp] Re: [] Abstract:[Resolutions for SC-PHY Modulation and Spreading Comments ] Purpose:[Resolutions for SC-PHY Modulation and Spreading Comments ] Notice:This document has been prepared to assist the IEEE P802.15. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. Release:The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P802.15.

2 doc.: IEEE 15-08-0322-00-r1 Submission Comment 23 12.2.2.3 Code Spreading To increase robustness in header and payload, Golay and pseudo random binary sequence (PRBS) codes by linear feedback shift register (LFSR) may be applied for code spreading. Three categories of spreading are defined: 1) for spreading factor of 32, Golay codes shall be used, 2) for Class 1 MCSs with spreading factors of 2 and 4, LFSR shall be used 3) for Class 4 MCS with spreading factor of 2, code repetition shall be used. 12.2.2.3.3 Code Repetition For a spreading factor of 2 at code repetition, each data bit shall be repeated twice as spreading. Tuncer Baykas,NICT May 2008

3 doc.: IEEE 15-08-0322-00-r1 Submission Comment 47 Normalization factors of SC modulation schemes ModulationNormalization factor Pi/2 BPSK1 Pi/2 QPSK1 Pi/2Star-8QAM1/{3+sqrt(3)} where inner circle has radius 1 and outer circle has radius 1+sqrt(3) Pi/2 16QAM1/sqrt(10) OOKsqrt(2) DAMIsqrt(2) Tuncer Baykas,NICT May 2008

4 doc.: IEEE 15-08-0322-00-r1 Submission Comment 64 The relative amplitude and phase offset of different SC modulation with relation to pi/2-BPSK/(G)MSK need to be clarified to assure interoperability Resolution: (We suggest that ) Relative phase offsets are shown clearly in Figure 188 and with the previous resolution for normalization values, amplitudes are clear, we also propose to modify Section 12.2.2.1 to describe the procedure of counter-clockwise pi/2 chip-level rotation for pi/2 BPSK, pi/2 QPSK, pi/2 star-8QAM, and pi/2 16QAM. Tuncer Baykas,NICT May 2008

5 doc.: IEEE 15-08-0322-00-r1 Submission Suggestion of modification 12.2.2.1.1 pi/2 BPSK in P48 –The pi/2 rotation is continuous and symbol-level (chip- level in case of spreading) and counter-clockwise, and this rotation shall be processed after preamble data addition and PCES insertion. The first chip of preamble has the initial constellation on x-axis. 12.2.2.1.2 pi/2 QPSK in P48, 12.2.2.1.4 pi/2 star 8- QAM in P49, and 12.2.2.1.5 pi/2 16-QAM in P49 –The pi/2 rotation is symbol-level and counter-clockwise rotation, and the rotation process is same as in described in 12.2.2.1.1. Tuncer Baykas,NICT May 2008


Download ppt "Doc.: IEEE 15-08-0322-00-r1 Submission May 2008 Tuncer Baykas,NICTSlide 1 Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs)"

Similar presentations


Ads by Google