Presentation is loading. Please wait.

Presentation is loading. Please wait.

© 2012 Autodesk From Nothing to Something using AutoCAD ® Electrical Todd Schmoock Solutions Engineer - Synergis Technologies, Inc.

Similar presentations


Presentation on theme: "© 2012 Autodesk From Nothing to Something using AutoCAD ® Electrical Todd Schmoock Solutions Engineer - Synergis Technologies, Inc."— Presentation transcript:

1 © 2012 Autodesk From Nothing to Something using AutoCAD ® Electrical Todd Schmoock Solutions Engineer - Synergis Technologies, Inc

2 © 2012 Autodesk Before getting started  Turn cell phones to silent!  Our lab assistants are:  Jim Swain  Steve Carlson  ???  Some questions:  How many currently use AutoCAD ® Electrical?  How many are thinking of purchasing AutoCAD Electrical?

3 © 2012 Autodesk Class Summary  In this lab you will work with AutoCAD ® Electrical to: Create an AutoCAD ® Electrical Project Create an AutoCAD ® Electrical schematic drawing Create an AutoCAD ® Electrical panel drawing Run bills of material, wire connections, and other reports on the newly created files  You will do all this with tools available in a typical installation of AutoCAD ® Electrical!

4 © 2012 Autodesk Learning Objectives At the end of this class, you will be able to:  Create an AutoCAD ® Electrical Project:  Create projects from scratch  Modify the project properties  Add schematic and panel drawings to the project  Modify the drawing properties  Create an AutoCAD ® Electrical schematic drawing:  Create a drawing using an AutoCAD ® template  Add the drawing to the project, review, and modify the drawing properties  Add Ladders, PLCs, Components, Wire Numbers  Create an AutoCAD ® Electrical panel drawing:  Create a drawing using an AutoCAD ® template  Add the drawing to the project, review, and modify the drawing properties  Extract information from the schematic to add the panel footprint  Run reports on the AutoCAD ® Electrical project

5 © 2012 Autodesk Class Setup

6 © 2012 Autodesk Class Setup:  Open AutoCAD ® Electrical  Note: There are files located in a folder called "MA2085-L" which is the Autodesk University lab name for this class, but you should not need them since you will be creating everything from scratch. These files will only be used if files are missing. ***Do not forget to fill out the class survey!!! Let’s get started!

7 © 2012 Autodesk Create an AutoCAD ® Electrical Project

8 © 2012 Autodesk  Create an AutoCAD ® Electrical Project using the “New Project” tool located in the Project Manager:

9 © 2012 Autodesk Create an AutoCAD ® Electrical schematic drawing

10 © 2012 Autodesk  Create an AutoCAD ® Electrical schematic drawing using the “New Drawing” tool located in the Project Manager :

11 © 2012 Autodesk Create an AutoCAD ® Electrical panel drawing

12 © 2012 Autodesk  Create an AutoCAD ® Electrical panel drawing using the “New Drawing” tool located in the Project Manager :

13 © 2012 Autodesk Run reports on drawing/project

14 © 2012 Autodesk  Run drawing/project reports:  Run Component Report on Active drawing:  Run (Wire) From/To Report:

15 © 2012 Autodesk Class Summary During this lab you have learned how to create an AutoCAD ® Electrical project. Created schematic and panel drawings using a regular AutoCAD ® template. You inserted ladders, PLCs, and blocks. Created a panel drawing by extracting the information from the schematic drawing. Then ran a bill of materials and other reports based on this newly created intelligent data. While this was only done on a small sample the same techniques could be used throughout a complete AutoCAD ® Electrical project.

16 © 2012 Autodesk Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.


Download ppt "© 2012 Autodesk From Nothing to Something using AutoCAD ® Electrical Todd Schmoock Solutions Engineer - Synergis Technologies, Inc."

Similar presentations


Ads by Google