1. Note: This brochure is designed to be printed. You should test print on regular paper to ensure proper positioning before printing on card stock. You may need to uncheck Scale to Fit Paper in the Print dialog (in the Full Page Slides dropdown). Check your printer instructions to print double-sided pages. To change images on this slide, select a picture and delete it. Then click the Insert Picture icon in the placeholder to insert your own image. To change the logo to your own, right- click the picture “replace with LOGO” and choose Change Picture. CadSoft EAGLE PCB Design Software was used for creation of the daughter card The daughter card is a six layer board containing noise sources, attenuator, switches, low pass filters, and controller Artificial Pulsar is controlled by the MOD5270 Oscillator is connected to side wide 10MHz clock Two noise sources are used One is for the actual pulsar and another is used for background noise floor to more accurately simulate a pulsar Team Members Kerlin Canelli -Major: Electrical Engineering -Contact: kcanelli@mix.wvu.edukcanelli@mix.wvu.edu Alexander Botten -Major: Electrical Engineering -Contact: ambotten@mix.wvu.eduambotten@mix.wvu.edu https://redmine.lcseecloud.net/projects/greenba nk-wideband-artificial-pulsar-randy-mccullough WIDEBAND ARTIFICIAL PULSAR System Design

2. Note: This brochure is designed to be printed. You should test print on regular paper to ensure proper positioning before printing on card stock. You may need to uncheck Scale to Fit Paper in the Print dialog (in the Full Page Slides dropdown). Check your printer instructions to print double-sided pages. To change images on this slide, select a picture and delete it. Then click the Insert Picture icon in the placeholder to insert your own image. To change the logo to your own, right- click the picture “replace with LOGO” and choose Change Picture. Problem Statement At the National Radio Astronomy Observatory (NRAO) in Green Bank, West Virginia, it has one of the largest astronomical telescopes in the world. They have done extensive pulsar research. Over the years they have develop sophisticated digital backends in support of pulsar research and pulsar timing projects. In order to test these backends to make sure they are working properly, an artificial pulsar is needed. The current artificial pulsar is out of date A new pulsar is needed with more advanced features to comprehensively test backends For the Wideband Artificial Pulsar, it is envisioned to have: Larger Bandwidth – (100MHz-1000MHz) Command Line Interface Adjustable pulse amplitude User selectable pulse width and period Polarization of pulses Independent noise floor Future implementation still needed: Dispersive line Phase shift RF enclosure Finalization of UI Components Netburner MOD5270 High-performance single board computer 32 bit data bus SPI connections MAXIM 2064 VGA Up to 22dB gain Built-in DAC Dual channel Noisecom 2501 Used as RF noise source Range of 1-1000MHz Specifications MOD5270