1. SURESTEP VINYL SHEETING_

2.  INTRODUCTION_  BENEFITS_  RANGES  SUGGESTED SPECIFICATION_  INSTALLATION INSTRUCTIONS_  MAINTENANCE PROCEDURES_  TECHNICAL PROPERTIES_ Surestep Vinyl Sheeting Surestep is a 2m wide glass fibre-mat reinforced compact antistatic vinyl floor covering, featuring a 0.7mm thick wear layer. The Surestep collection meets the class T requirement of EN 660-2 for abrasion resistance.

3. INTRODUCTION_  Surestep is a 2m wide glass fibre-mat reinforced compact antistatic vinyl floor covering, featuring a 0.7mm thick wear layer  The Surestep collection meets the class T requirement of EN 660-2 for abrasion resistance  Surestep receives the unique PUR Pearl™ surface treatment, ensuring remarkable stain resistance, ease of maintenance and eradicates the need for waxing or sprayed refurbishment throughout the lifespan of the product  A very high resilience ranking ensures resistance to heavy loads, while ensuring efficient castor wheel traffic management Surestep Vinyl Sheeting Surestep is a 2m wide glass fibre-mat reinforced compact antistatic vinyl floor covering, featuring a 0.7mm thick wear layer. The Surestep collection meets the class T requirement of EN 660-2 for abrasion resistance.

4. BENEFITS_  Surestep contains no restricted substances  Resistance to intense traffic  Exceptional indentation resistance of 0,02mm  PUR Pearl™ surface treatment  Remarkable stain resistance  R10 slip resistance  Homogeneous multi-layer  50% natural  100% recyclable Surestep Vinyl Sheeting Surestep is a 2m wide glass fibre-mat reinforced compact antistatic vinyl floor covering, featuring a 0.7mm thick wear layer. The Surestep collection meets the class T requirement of EN 660-2 for abrasion resistance.

5. RANGES_SURESTEP STAR  Innovative, muted and sophisticated  The holographic chips of Forbo’s Surestep Star safety vinyl collection add colour to the neutral palette  The collection has a 100% PVC wear layer and R10 slip resistance  It is available in 10 natural colours RANGES_SURESTEP ORIGINAL  Forbo’s Surestep Original Compact collection has a hardwearing 100% PVC wear layer and a clear and brighter colour palette of 10 colours Surestep Vinyl Sheeting Surestep is a 2m wide glass fibre-mat reinforced compact antistatic vinyl floor covering, featuring a 0.7mm thick wear layer. The Surestep collection meets the class T requirement of EN 660-2 for abrasion resistance.

6. SUGGESTED SPECIFICATION_SHEETING Supply and fix 2.0mm thick x 2.0m wide Surestep R10 multi-layered homogeneous vinyl safety sheeting with PUR Pearl™ surface treatment, manufactured in accordance with EN 649 and laid in FloorworX No. 62 acrylic adhesive which has been spread using a trowel fitted with an A2 notched blade at a rate of between 5.5m2 and 6.5m2 per litre on a previously prepared Class 1 sub-floor in accordance with SANS 10070, using FloorworX Self Leveller when required, including all cutting and waste The sheeting must be rolled in both directions with an articulated 68kg three-sectional roller immediately after it has been laid into the adhesive Joins must be butted, grooved and heat welded using FloorworX Welding Rod, ensuring that the welding rod bonds to more than 70% of the sheet thickness Surestep Vinyl Sheeting Surestep is a 2m wide glass fibre-mat reinforced compact antistatic vinyl floor covering, featuring a 0.7mm thick wear layer. The Surestep collection meets the class T requirement of EN 660-2 for abrasion resistance.

7. WARRANTY_ FloorworX offers a 5 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations Surestep Vinyl Sheeting Surestep is a 2m wide glass fibre-mat reinforced compact antistatic vinyl floor covering, featuring a 0.7mm thick wear layer. The Surestep collection meets the class T requirement of EN 660-2 for abrasion resistance.

8. INSTALLATION INSTRUCTIONS_  Surestep should be installed in accordance with manufacturer’s recommendations  Training Centre is available for installation training to installers SUB-FLOOR_  Sub-floors must be smooth, hard, clean, and dry before laying commences  The final appearance and durability of any resilient flooring installation depends largely on the condition of the surface upon which it is laid  A good sub-floor is vital in achieving a satisfactory adhesive bond and long-term durability  Uneven, solid or suspended timber floors may need preparation to meet the required standard Surestep Vinyl Sheeting Surestep is a 2m wide glass fibre-mat reinforced compact antistatic vinyl floor covering, featuring a 0.7mm thick wear layer. The Surestep collection meets the class T requirement of EN 660-2 for abrasion resistance.

9. SUB-FLOOR_  All sub-floors must be tested for moisture content prior to installation  To prevent problems associated with rising damp - it is essential that a damp- proof membrane be incorporated beneath the sub-floor  The South African Standard Building Regulations require that all sub-floors in contact with the ground are so constructed as to be damp-proof  Water is an integral part of the construction of a sub-floor - the amount of water used depends on the type of sub-floor, the required structural strength and the extent of curing  It is impossible to state a time period after which a sub-floor may be considered dry enough upon which to lay flooring - factors such as ambient temperature, relative humidity, thickness of the slab, type of finish required and methods used to cure the concrete, will affect this period  There are various methods of testing the moisture content within the sub-floor, which includes the use of a Hygrometer – the most practical and accurate instrument Surestep Vinyl Sheeting Surestep is a 2m wide glass fibre-mat reinforced compact antistatic vinyl floor covering, featuring a 0.7mm thick wear layer. The Surestep collection meets the class T requirement of EN 660-2 for abrasion resistance.

10. CLIMATIZATION_ Surestep must be allowed to relax for 24 hours in a uniform room temperature between 18°C and 27°C prior to installation ADHESIVE_  The recommended adhesive for Surestep is FloorworX No. 62 acrylic adhesive  Adhesive to be spread using a trowel fitted with an A2 notched blade at a rate of between 5.5m2 and 6.5m2 per litre POST INSTALLATION_  It is essential that during the course of installation the material be rolled in both directions with an articulated 68kg three section metal floor roller Surestep Vinyl Sheeting Surestep is a 2m wide glass fibre-mat reinforced compact antistatic vinyl floor covering, featuring a 0.7mm thick wear layer. The Surestep collection meets the class T requirement of EN 660-2 for abrasion resistance.

11. MAINTENANCE_PREVENTIVE CARE  Approximately 80% of the dirt and soiling that has to be cleaned off a floor has been trafficked in from outside the building. More than 90% of that soiling can be avoided by the use of an effective entrance matting system  When less dirt is trafficked through the entrance there will be a reduction in maintenance requirements.  Regular cleaning is more cost-effective and hygienic than occasional heavy duty cleaning  Wipe up any grease and oil spills immediately and treat stains as soon as they are observed  Black rubber wheels and rubber furniture feet can discolour the floorcovering - hard plastic is preferred  Always follow the manufacturer’s dosage instructions regarding the use of cleaning chemicals Surestep Vinyl Sheeting Surestep is a 2m wide glass fibre-mat reinforced compact antistatic vinyl floor covering, featuring a 0.7mm thick wear layer. The Surestep collection meets the class T requirement of EN 660-2 for abrasion resistance.

12. MAINTENANCE_POST INSTALLATION SITE CLEAN  Floor maintenance begins immediately after the completion of installation  The initial step is to remove any loose dirt or debris using a dry mop, broom or vacuum  Sand, construction debris and sharp-edged objects may result in irreparable damage being inflicted to the new floor.  Remove any visible adhesive residue using a damp cloth, once the adhesive has cured it will be difficult to remove  If other trades are working in the building after the installation of the flooring, the floor must be protected from subsequent damage by the use of thick paper, cardboard or hard board.  No wet maintenance must take place until 72 hours (3 days) have elapsed from the time of installation - this is to ensure that the adhesive has sufficient time to cure properly and develop full bond strength Surestep Vinyl Sheeting Surestep is a 2m wide glass fibre-mat reinforced compact antistatic vinyl floor covering, featuring a 0.7mm thick wear layer. The Surestep collection meets the class T requirement of EN 660-2 for abrasion resistance.

13. MAINTENANCE_INITIAL CLEAN  Dust mop or vacuum the floor to remove loose soil and dust  Scrub the floor using a solution of FloorworX Maintain diluted 1:10 with clean water, with a rotary machine fitted with a blue pad or suitable brush / cylindrical brush machine when necessary  Remove the residue immediately after scrubbing using a wet/dry vacuum  Rinse with clean water using a flat mop and allow the floor to dry  Dry buff the floor using a rotary machine fitted with a white pad Surestep Vinyl Sheeting Surestep is a 2m wide glass fibre-mat reinforced compact antistatic vinyl floor covering, featuring a 0.7mm thick wear layer. The Surestep collection meets the class T requirement of EN 660-2 for abrasion resistance.

14. MAINTENANCE_REGULAR CLEANING  Dust mop with flat mop or vacuum on a daily basis to remove dust and loose dirt  Treat spills, spots and stains immediately. Spot clean by hand with a red or white pad and a diluted solution of FloorworX Maintain, working from the outside of the mark to its centre  Dry buff periodically  The frequency of dry buffing is dependent on the amount of foot traffic and the effectiveness of the daily cleaning regime  Do not apply any sealers or polishes to the floor as they will reduce the slip resistant properties of the flooring. Surestep Vinyl Sheeting Surestep is a 2m wide glass fibre-mat reinforced compact antistatic vinyl floor covering, featuring a 0.7mm thick wear layer. The Surestep collection meets the class T requirement of EN 660-2 for abrasion resistance.

15. MAINTENANCE_PERIODIC MAINTENANCE  Scrub the floor using a solution of FloorworX Maintain diluted 1:10 with clean water, with a rotary machine fitted with a blue pad or suitable brush / cylindrical brush machine when necessary  Remove the residue immediately after scrubbing using a wet/dry vacuum  Rinse with clean water using a flat mop and allow the floor to dry  Dry buff the floor using a rotary machine fitted with a white pad Surestep Vinyl Sheeting Surestep is a 2m wide glass fibre-mat reinforced compact antistatic vinyl floor covering, featuring a 0.7mm thick wear layer. The Surestep collection meets the class T requirement of EN 660-2 for abrasion resistance.

16. TECHNICAL PROPERTIES_ Surestep Vinyl Sheeting Surestep is a 2m wide glass fibre-mat reinforced compact antistatic vinyl floor covering, featuring a 0.7mm thick wear layer. The Surestep collection meets the class T requirement of EN 660-2 for abrasion resistance.

17. TECHNICAL PROPERTIES_ Surestep Vinyl Sheeting Surestep is a 2m wide glass fibre-mat reinforced compact antistatic vinyl floor covering, featuring a 0.7mm thick wear layer. The Surestep collection meets the class T requirement of EN 660-2 for abrasion resistance.

18. Please feel free to visit our newly revamped website at www.floorworx.co.zawww.floorworx.co.za Read our Blog on our website at http://www.floorworx.co.za/category/blog/http://www.floorworx.co.za/category/blog/ Subscribe to our Newsletter by mailing your request to info@floorworx.co.zainfo@floorworx.co.za Follow us on Facebook, Twitter, YouTube & Pinterest END OF PRESENTATION_