1. Minimum to run Cloudy u Must specify –SED – shape of the radiation field –Flux of photons per unit area –Gas density u May specify –Gas composition, grains (grain-free solar by default) –Gas equation of state (often constant density) –Stopping criterion, often physical thickness

2. Parameters – the SED u Quick start guide Chapter 5 u Hazy 1, Chapters 4, 6 u Can be specified as a fundamental shape such as a blackbody u Generally entered as table of points

4. SED brightness – the intensity case  Specify  (H) – photons per unit area –The “intensity case” –predicts emission per unit area –Inner radius of cloud does not need to be specified

5. SED brightness – the luminosity case u Specify Q (H) – photon luminosity –Inner radius of cloud must be specified, since  (H) = Q(H) / 4  r 2 –predicts emission line luminosities

6. The “main output” u The *.out file created when code is executed –QSG 7.1 & Hazy 2 Chapter 1 u Gas & grain composition u Physical conditions in first and last zone u Emission line spectrum u Mean quantities u Cloudy is designed to be autonomous and self aware u Will generate notes, cautions, or warnings, is conditions are not appropriate.

7. “Save” output u Requested with various “save” commands –Hazy 1 Section16.35 and later u The main way the code reports its results

8. The Orion H II Region u Based on Baldwin, Ferland, Martin+91 model u Layer in hydrostatic equilibrium u Only the H II region (so faster) u Cloudy / tsuite / auto / orion_hii_open.in

14. Parameters – the SED u Quick start guide Chapter 5 u Hazy 1, Chapters 4, 6 u Can be specified as a fundamental shape such as a blackbody u Generally entered as table of points

15. SED brightness – the intensity case  Specify  (H) – photons per unit area –The “intensity case” –predicts emission per unit area –Inner radius of cloud does not need to be specified

16. SED brightness – the luminosity case u Specify Q (H) – photon luminosity –Inner radius of cloud must be specified, since  (H) = Q(H) / 4  r 2 –predicts emission line luminosities

17. Cloud density u “hden” command u Constant density by default u Other equations of state possible

18. Composition u Solar, no grains, by default u Other standard mixes possible

19. Open vs closed geometry Hazy 2.3 2014 Cloudy workshop

20. Covering and filling factors u Covering factor –AGN3 … u Filling factor, how to do clumps –AGN3, hazy1 2014 Cloudy workshop

21. Strömgren length 2014 Cloudy workshop

22. Strömgren length u Number of ionizing photons entering layer is balance by number of recombinations along it 2014 Cloudy workshop

23. Matter vs radiation bounded u SL is for radiation bounded, there is an I front u Show Abell sphere – matter bounded, u So phi(H) > SL equation u Show pics, give section in AGN3

24. Beyond the H + layer 2014 Cloudy workshop u Little H + ionizing radiation gets past the H + layer u Deeper regions are atomic or molecular u Also cold and produce little visible light u Large extinction due to dust

25. Clumping u Filling factors, when clumps smaller than photon scale length –Osterbrock & Flather 1957 u Add together distinct clouds, when clumps larger than photon scale length –Balwin+ 1995 ApJ 455, L119+

26. Volume elements in larger structures