1. SIMON
Presented By:
Amanda Buczkowski
James Jenkins
Fadi Hanna

2. HOW DO YOU PLAY THE GAME:
1. Flip switch one to reset the game.
2. Push button 1 to start a game.
3. In level one, a random LED between 5 and 8 will light, delay, and then turn off. The
player must press the corresponding button.
4. The game then moves on to level two where two random LED’s will light and the player
must press the buttons in that sequence. A correct answer will light LED’s 5-8 , and an
incorrect answer will light LED’s 1-4.
5. The process of following the sequence with the corresponding button will continue until
the fourth and final level is reached UNLESS at anytime during the game a wrong button is
pushed. This will terminate the game, and cause the player to reset and start over.

3. LEDs
7-segment displays
pushbuttons
switches

4. 1st Button to Start the Game
Incorrect Choice
1st switch to reset the game
Correct Choice
THEN, ALL 8 LEDS WILL LIGHT AFTER ALL 4 LEVELS HAVE BEEN SUCCESSFULLY COMPLETED

5. clk BTN Button clr clr Random clk SW1 Pushed SW4
THE WHITE WORDS AND THE RED BLOCKS ARE THE EXTRAS WE ADDED TO OUR PROJECT, EVERYTHING ELSE IS SAME AS LAB 9

6. This is the BUTTON.VHD file we created

7. This is part one for the RANDOM.VHD

8. This is part two for the RANDOM.VHD

9. This is the main program (PROJECT.VHD)

10. This is the instructions we added for the W8Y_CONTROL

11. This is the instructions we added for the W8Y_CODES

12. WHYP on the W8Y

17. The Moment You've All Been Waiting For, "SIMON"

18. ANY QUESTIONS?