Presentation is loading. Please wait.

Presentation is loading. Please wait.

Dr David C. Reid Dr Mark Dunn RDTG Operator’s Workshops Sept 2010 ACARP project C18023 CM2010 – Continuous Miner Automation.

Similar presentations


Presentation on theme: "Dr David C. Reid Dr Mark Dunn RDTG Operator’s Workshops Sept 2010 ACARP project C18023 CM2010 – Continuous Miner Automation."— Presentation transcript:

1 Dr David C. Reid Dr Mark Dunn RDTG Operator’s Workshops Sept 2010 ACARP project C18023 CM2010 – Continuous Miner Automation

2 Project Overview Project context CM Automation component of the CM2010 initiative Project grand goal A remotely supervised continuous miner for roadway development Project impact Essential and major component of CM2010 goals Immediate health and safety benefits Immediate productivity benefits We are now halfway through 3 year project

3 Enabling Technology Need to develop navigation system suitable for accurate control of CM Can’t use GPS underground (without a lot of additional infrastructure) Technology needs to be physically robust, reliable, accurate and ideally self-contained (doesn’t rely on external infrastructure) Technology needs to work under all normal CM operating conditions Inertial navigation meets most of the above criteria Already proven in longwall mining automation (but higher performance required for CM automation) Reasonably self contained (but needs odometry/velocity aiding) Has the additional benefit of providing real-time accurate CM pitch/roll/heading information at the CM Need to develop a non-contact odometry solution for this system to be practical

4 CM Navigation Solution: INS + Odometry Presently evaluating INS and Odometry Solutions INS Odometry IMU Gyros Accels Navigation Equations Position (AT, CT, VT) Orientation (Heading pitch Roll) Environment Process Aiding Source

5 Non-Contact Odometry Inertial navigation system requires an external aiding source to achieve required position accuracy An accurate non-contact odometer is key to practical CM navigation system: Needs to be non-contact to be practical Needs to be rugged-isable Needs to be immune/tolerant to dust, moisture, vibration Needs to be very accurate – navigation algorithms are very sensitive to latency (<40mS), accuracy, timing and measurement jitter Multi-sensor solution provides redundancy benefits

6 Non-contact Odometry Technologies Visual Laser Radar OtherRadio (RF) localisation, ultrasonic, magnetic, … Mono StereoMulti Point Multibeam3D Scanning UWB Dopplere-Steering

7 Results so far A CM navigation system has been developed Non-contact odometry solutions have been developed for velocity aiding using hybrid technologies Ultra low speed Doppler radar Optical flow position sensor (like an optical mouse) A skid steer vehicle The Phoenix has been customised for evaluating the navigation system performance

8 Mobile CM Test Platform: The Phoenix Non-contact optical flow odometry and very low speed Doppler radar

9 Test Platform Development: Phoenix Phoenix provided a realistic CM-like platform for VMS-aided navigation testing Installation of RTK GPS equipment on Phoenix for ground-truth reference Installation of RTK surveyed base station at QCAT and radio link to Phoenix Doppler radar and optical position sensor installed Sagem Sigma30 INS installed Custom-developed control and communication systems installed Navigation experiments conducted on both paved and unpaved (rough) tracks

10 Results: CM Attitude Monitoring Accurate heading/pitch/roll information available on CM

11 Phoenix Navigation Testing Area Test tracks – monorail/paved road and rough unpaved track

12 Phoenix Navigation Testing [external video]

13 Next Stages Further enhancement to the navigation solutions Additional evaluation with lower performance inertial system Further control system development Development of Mine-To-Plan software tool Field trials Quarry Underground

14 Summary A practical CM navigation systems has been developed and demonstrated under limited operating conditions New non-contact odometry technologies have been demonstrated Further development and testing required under more realistic operating conditions

15 Contact Us Phone: 1300 363 400 or +61 3 9545 2176 Email: enquiries@csiro.au Web: www.csiro.au Thank you Exploration and Mining Dr David C. Reid Principal Research Engineer Dr Mark T Dunn Research Engineer Phone: 07 3327 4437 Email: david.reid@csiro.au


Download ppt "Dr David C. Reid Dr Mark Dunn RDTG Operator’s Workshops Sept 2010 ACARP project C18023 CM2010 – Continuous Miner Automation."

Similar presentations


Ads by Google