2. WOODSHOP 1 WOOD JOINTS

4. Tools needed for Layout Sharp Pencil Steel Rule Tape Measure Try Square Carpenter’s Square Speed Square

5. ToolsNeededToCutOut Tools Needed To Cut Out Crosscut Saw Rip Saw Back Saw Miter Saw Block Plane Wood Chisel Mallet

6. Tools and Materials to Assemble Try SquareHammerNail set Drill & 7/64” Bit Phillips Screwdriver Bit Glue (Titebond) Clamps Nails (#3 finish) Woodscrews (#8FH or deck screws) and 

7. A PINE BOARD 1”x Softwood Conifer Evergreen Needle bearing Softwood Varieties Pine Fir Redwood Larch Cedar Hemlock

8. Must be Square, Smooth, and Parallel 2 “ 4” ¾” Two Pieces are needed for each wood joint joint Edges and Corners

9. SHARP TOOLS SHARP MINDS Check your tools for sharpness Don’t use dull or damaged tools Learn how to sharpen blades and cutters

10. Wear goggles and aprons Return tools to Cabinet Put Your Projects and Property Away Cleanup Your Mess NO Running or Throwing Stuff Treat each other with respect Wait for Dismissal Evaluate the Day Plan for Tomorrow Woodshop Classroom Rules

11. SHOP SAFETY

12. EYES hurt easily Goggles are Required

13. Examples D ado Miter