1. MPLS VPNs by Richard Bannister

2. The Topology The next two slides display both the physical and logical topology of our simple example network –Please study the diagrams carefully before moving on

5. Laying The Foundations Terms that are often heard in close proximity to “MPLS VPN” are “VRFs” and “Multiprotocol BGP”. However, before we begin to look at protocols/features such as these we need to get basic MPLS Unicast IP Forwarding functioning correctly: –Step 1 - Enable an IGP on each router within the cloud and verify routing tables are populated correctly BGP (& OSPF) RID reachability is key here –Step 2 - Enable MPLS on all ‘provider router to provider router’ interfaces An available label will then be chosen by each router and advertised on all interfaces configured for MPLS using TDP (old default) or LDP (new default & what we’ll use) for each prefix learned via the IGP –OSPF will be configured as the IGP in this example –Remember. LDP ‘floods’ in all directions so routers will consult the routing table to make a decision on which label path to use for a given prefix (important when loops exist)

6. Inside The Cloud

7. Overlaying MPLS VPNs Now that the ‘cloud’ has basic MPLS IP Unicast Forwarding enabled we can create Virtual Routing and Forwarding (VRF) tables and make use of Multiprotocol BGP (MP-BGP/MBGP) to advertise prefixes held within the VRFs –In addition to the standard MPLS label used for Unicast IP Forwarding (now the “outer label” and used to reach a BGP next-hop), an “inner label” will now be added to packets to inform other PE routers of the correct egress VRF tables to place packets in upon receiving them (ready for standard forwarding) This is how a ‘VPN’ is created – by separating routing information per-customer at the edge of the cloud and ignoring IP headers for forwarding within the cloud

8. Customer to Provider As MPLS is a layer 3 technology a method of communicating routing information between the customer (with possible overlapping prefixes with other customers) and the provider (VRF tables used to separate customers) is required –Methods of CE to PE route advertisement include: Static routing RIPv2 EIGRP OSPF BGP

9. Advertisement Flow

10. Traffic Flow

11. MPLS VPN - CE to PE Static Routing Example

12. MPLS VPN - CE to PE RIPv2 Example

13. MPLS VPN - CE to PE EIGRP Example

14. MPLS VPN - CE to PE OSPF Example

15. MPLS VPN - CE to PE BGP Example