2. Chapter 7 Energy

3. Introduction Universe is made up of matter and energy. Energy is the mover of matter. It has several forms. To understand this concept we will begin with a closely related physical concept.

4. 1.WORK l Now instead of a force for how long in time we consider a force for how long in distance. l Work = Force x distance or W = F. d l Units - Joules (J) or ft. lb l BTU = 778 ft. lb (energy of one wooden kitchen match) l Pushing on a wall and wall doesn’t move (no work done on the wall)

5. x

6. Video Clip Manpowered Machines

7. 2.POWER Power = Work/time or P = W/t Units - J/s = W 550 ft. lb /s =1 hp 1 hp = 746 J/s = 746 W 1 BTU/hr = 0.293 W 100 W bulb =0.1341 hp 250 hp engine = 186,450 W

8. 3.MECHANICAL ENERGY l When work is done on an object, the object generally has acquired the ability to do work. l This is called energy and it has the same units as work. Two Types of Mechanical Energy Potential Energy Kinetic Energy

9. Potential Energy l Energy of position or configuration l Demo - Dart gun l Other examples - Springs, bow, sling shot, chemical energy, and gravitational potential energy l The latter is GPE = mgh

10. l The potential energy of an object depends on a reference position. l It represents the work done against gravity to put the mass m in its position h above some reference position. l It is an energy of position.

11. Video Clips InclineScrew

12. Kinetic Energy l It is an energy of motion. l It is a square law. Total Work (work done by all forces acting on mass m) =  KE

13. Work to Stop KE 0 Note

14. Work-Energy Theorem The net work done on an object is equal to the change in the kinetic energy of the object. Net Work =  KE

15. 4.CONSERVATION OF ENERGY l Demo - Bowling ball pendulum l Demo - Loop the loop l Video - Pole Vaulting l Galileo's inclines l Energy lost due to friction is actually not a loss; it is just a conversion.

16. l Energy cannot be created or destroyed. l It may be transformed from one form into another, but the total amount of energy never changes. l Energy Conservation in Satellite Motion (Next slide)

17. Ellipse Parabola Hyperbola Energy is conserved along all of these paths. Perigees Apogees Circle

18. Video Clips Driving Nails Water Wheel Roller Coaster

19. Condition for Conservation of Mechanical Energy l No work can be done on the object by a nonconservative force. l A nonconservative force is a force that converts mechanical energy into another form. l Example: Friction

20. l No work is required to maintain circular motion at constant speed.

22. 5.Machines l If no losses then work input = work output (F. d) input = (F. d) output l Examples - levers, block and tackle, etc. l Demo - Block and tackle l Demo - Hydraulic lift

23. F D = F D D D

24. 6.EFFICIENCY l Efficiency = work done/energy used l Useful energy becomes wasted energy with inefficiency. l Heat is the graveyard of useful energy. l EER = energy efficiency ratio It is the output capacity(BTU/hr)/input energy(Watts) (Output capacity represents energy moved.)

25. 7.COMPARISON OF KINETIC ENERGY AND MOMENTUM l KE is a scalar and cannot be canceled.

26. Thief absorbs all the kinetic energy. This is the impulse applied to the bullet. This is the impulse applied to the man.

27. Thief does not absorb all the kinetic energy. - This is the impulse applied to the bullet. This is the impulse applied to the man. This is the impulse from previous slide.

28. l Rubber bullets versus lead bullets l Slow and fast football players with different masses. Consider head-on with one having twice the mass but half the speed of the other.

31. l Twice the mass at half the speed. Momentum can cancel.

32. l Kinetic energy is not a vector and cannot cancel out. l The kinetic energy of the big slow person is l The kinetic energy of the small fast person is

33. Punch is the same but the energy delivered is not.

34. 8.SOURCES OF ENERGY Except for nuclear and geothermal power, the source of practically all our energy is the sun. Nuclear power Geothermal power Solar power Wind power

35. 9.ENERGY FOR LIFE Reading assignment

36. Chapter 7 Review Questions

37. A 10 lb weight is lifted 5 ft. A 20 lb weight is lifted 2.5 ft. Which lifting required the most work? (a) 10 lb weight (b) 20 lb weight (c) same work for each lifting (d) not enough information is given to work the problem (c) same work for each lifting

38. Two cars, A and B, travel as fast as they can to the top of a hill. If their masses are equal and they start at the same time, which one does the most work if A gets to the top first? (a) A (b) B (c) they do the same amount of work

39. An object of mass 6 kg is traveling at a velocity of 30 m/s. How much total work was required to obtain this velocity starting from a position of rest? (a) 180 Joules (b) 2700 Joules (c) 36 Joules (d) 5 Joules (e) 180 N (b) 2700 Joules

40. A 20 pound weight is lifted 4 feet. The change in potential energy of the weight in ft. lb is (a) 20 (b) 24 (c) 16 (d) 80 (e) 5 (d) 80