Presentation is loading. Please wait.

Presentation is loading. Please wait.

Johnstone High School Isometric Introduction. Isometric Views with Circles and Curves Isometric Views are one of the forms of 3D views that you need to.

Similar presentations


Presentation on theme: "Johnstone High School Isometric Introduction. Isometric Views with Circles and Curves Isometric Views are one of the forms of 3D views that you need to."— Presentation transcript:

1 Johnstone High School Isometric Introduction

2 Isometric Views with Circles and Curves Isometric Views are one of the forms of 3D views that you need to know about in the Standard Grade Graphic Communication course. This type of drawing shows the length, breadth, and height of the object being drawn. An isometric is drawn with a corner closest to the viewer. All vertical lines and all lines angled back at 30 º can be measured accurately. No other lines on Isometric views can be measured.

3 Isometric Views with Circles and Curves If you are sitting an SQA Credit paper in Graphic Communication, you will be required to know how to draw isometric views with curves. This type of drawing is always included in the final paper each year. The table on the following slide shows when each type of drawing was used and how many marks were allocated to it. You will need to know how to draw full and part circles and also sloping edges and surfaces. The ability to be able to answer questions about isometrics will be a great help in letting you reach the pass mark in the Credit exam paper. If you are sitting the General paper you will need to know how to draw Isometric Views, although they will not normally include curves and circles, but will include sloping edges and surfaces.

4 Isometric Views – Credit Paper YEARSubjectNUMBER OF FULL CIRCLES NUMBER OF PART CIRCLES TOTAL MARKS FOR QUESTION % of DA mark available 1991 Electronic Game Salt Dish (sect) 0000 4040 15 12 21% 17% 1992 Disc Box (exploded) 001826% 1993 CD Player 111826% 1994 Staple Gun 021420% 1995 Torch 101521% 1996 Putting Aid 011826% 1997 CD Player 111826% 1998 Label Machine 101623% 1999 Slide Projector 101826% 2000 Speakers 111623% 2001 Bathroom scales 111623% 2002 Coffee maker 111623%

5 Isometric Views - General YEARSUBJECTEXPLODED TOTAL MARKS FOR QUESTION % of DA mark available 1991 Fireplace Prism - Box (sketch) Yes No 12 8 17% 11% 1992 Bracket No1014% 1993 Plant Pot Holder Yes1622% 1994 1995 1996 Torch Yes1521% 1997 Box Yes1217% 1998 Plant Pot Stand (exploded) Yes1622% 1999 2000 Burglar Alarm No811% 2001 2002

6 PowerPoint Presentation. 2003


Download ppt "Johnstone High School Isometric Introduction. Isometric Views with Circles and Curves Isometric Views are one of the forms of 3D views that you need to."

Similar presentations


Ads by Google