1. © 2006 Cisco Systems, Inc. All rights reserved. Optimizing Converged Cisco Networks (ONT) Module 3: Introduction to IP QoS

2. © 2006 Cisco Systems, Inc. All rights reserved. Lesson 3.5: Implementing QoS with Cisco AutoQoS

3. © 2006 Cisco Systems, Inc. All rights reserved. Objectives  Describe LAN and WAN features of Cisco AutoQoS.  Identify the guidelines when using Cisco AutoQoS to implement QoS policies.  Describe the features of the Cisco Security Device Manager (SDM).  Explain how SDM can be used to implement QoS on Cisco devices.  Compare and contrast four methods for configuring QoS on a network.

4. © 2006 Cisco Systems, Inc. All rights reserved. Cisco AutoQoS

5. © 2006 Cisco Systems, Inc. All rights reserved. Cisco AutoQoS Features in a WAN FeatureBenefit Autodetermination of WAN Settings Eliminates the need to know QoS theory and design in common deployment scenarios Autoclassification of VoIP Settings Automatically classifies RTP payload and VoIP control packets (H.323, H.225 unicast, Skinny, SIP), and MGCP Initial Policy Generation Reduces the time needed to establish an initial, feasible QoS policy solution VoIP LLQ Provisioning Provisions LLQ for the VoIP bearer and bandwidth guarantees for control traffic WAN Traffic Shaping Enables WAN traffic shaping (FRTS, CIR and burst) Link Efficiency Enables link efficiency mechanisms (LFI and cRTP) as appropriate Management Provides SNMP and syslog alerts for VoIP packet drops

6. © 2006 Cisco Systems, Inc. All rights reserved. Cisco AutoQoS Features in a LAN FeatureBenefit Simplified Configuration One-command voice configuration does not affect other network traffic. Can be fine tuned. Queue Configuration Configures queue admission criteria, Cisco Catalyst strict-priority queuing with WRR scheduling, modifies queue sizes and weights. Automated & Secure Detects Cisco IP Phones and enables AutoQoS settings. Protects against malicious activity during Cisco IP phone relocations and moves. Optimal VoIP Performance Leverages decades of networking experience and uses all advanced QoS capabilities of the Cisco Catalyst switches. End-to-End Interoperability Works with AutoQoS settings on all other Cisco switches and routers. Trust Boundary Enforcement Enforces the trust boundary on Cisco Catalyst switch access ports, uplinks, and downlinks NBAR SupportEnables NBAR for different traffic types

7. © 2006 Cisco Systems, Inc. All rights reserved. Cisco AutoQoS Use Guidelines  Make sure that: Any QoS configurations on the WAN interface are removed. CEF is enabled. NBAR is enabled. Correct bandwidth statement is configured on the interface. Cisco AutoQoS is enabled on the interface.

8. © 2006 Cisco Systems, Inc. All rights reserved. Cisco AutoQoS Example  Enable Cisco AutoQoS on relevant devices (such as LAN switches and WAN routers) that need to perform QoS.

9. © 2006 Cisco Systems, Inc. All rights reserved. Cisco AutoQoS Example (Cont.)  interface Serial1/3  ip cef  bandwidth 1540  ip address 10.10.100.1 255.255.255.0  auto qos voip IP CEF and Bandwidth AutoQoS for VoIP Traffic Recognized by NBAR

10. © 2006 Cisco Systems, Inc. All rights reserved. Cisco Security Device Manager (SDM)

11. © 2006 Cisco Systems, Inc. All rights reserved. Steps 1 to 4: Creating a QoS Policy 1. 2. 3. 4.

12. © 2006 Cisco Systems, Inc. All rights reserved. Step 5: Launching the QoS Wizard

13. © 2006 Cisco Systems, Inc. All rights reserved. Step 6: Selecting the Interface

14. © 2006 Cisco Systems, Inc. All rights reserved. Step 7: Generating a QoS Policy

15. © 2006 Cisco Systems, Inc. All rights reserved. Reviewing the QoS Configuration

16. © 2006 Cisco Systems, Inc. All rights reserved. Completing the Configuration: Command Delivery Status

17. © 2006 Cisco Systems, Inc. All rights reserved. Monitoring QoS Status 1. 2. A B

18. © 2006 Cisco Systems, Inc. All rights reserved. Comparing QoS Implementation Methods Legacy CLIMQC Cisco AutoQoS Cisco SDM QoS Wizard Ease of usePoor Moderately easy Simple Ability to fine-tune AcceptableVery goodLimited Time to implement LongestAverageShortestShort ModularityPoorExcellent Very good

19. © 2006 Cisco Systems, Inc. All rights reserved. Summary  Cisco AutoQoS simplifies and shortens the QoS deployment cycle. Cisco AutoQoS helps in all of the five major aspects of successful QoS deployments.  Cisco AutoQoS simplifies deployment and speeds provisioning of Quality of Service technology over a Cisco network infrastructure. It reduces human error and lowers training costs.  Cisco Security Device Manager (SDM) is an intuitive, web-based device management tool that was created for easy and reliable deployment and management of Cisco IOS routers.

20. © 2006 Cisco Systems, Inc. All rights reserved. Self Check 1.What are the requirements that must be met in order to run AutoQoS? 2.What command is used to enable AutoQoS on an interface? 3.What traffic classes are supported by SDM? 4.Which method of configuring QoS is the hardest to implement, requires the most time and offers the least modularity?

21. © 2006 Cisco Systems, Inc. All rights reserved. Q and A

22. © 2006 Cisco Systems, Inc. All rights reserved. Resources  Cisco AutoQoS Q&A http://www.cisco.com/en/US/partner/tech/tk543/tk759/tk879/tec hnologies_q_and_a_item0900aecd8020a589.shtml  SDM Demo Lab (Live Demo) http://www.cisco.com/en/US/partner/products/sw/secursw/ps53 18/prod_presentation0900aecd802adc65.html  Cisco SDM Multimedia Demo http://www.cisco.com/cdc_content_elements/flash/sdm/sdm.exe  SDM Presentations (VoDs) http://www.cisco.com/en/US/partner/products/sw/secursw/ps53 18/prod_presentation_list.html  SDM Homepage http://www.cisco.com/en/US/products/sw/secursw/ps5318/

23. © 2006 Cisco Systems, Inc. All rights reserved.