Presentation is loading. Please wait.

Presentation is loading. Please wait.

Computational Time-reversal Imaging

Similar presentations


Presentation on theme: "Computational Time-reversal Imaging"— Presentation transcript:

1 Computational Time-reversal Imaging
A.J. Devaney Department of Electrical and Computer Engineering Northeastern University Web: Talk motivation: TechSat 21 and GPR imaging of buried targets Talk Outline Overview Review of existing work New simulations Reformulation Future work and concluding remarks February 23, 2000 A.J. Devaney--BU presentation

2 Experimental Time-reversal
Goal is to focus maximum amount of energy on target for purposes of target detection and location estimation In time-reversal imaging a sequence of illuminations is used such that each incident wave is the time-reversed replica of the previous measured return First illumination Intermediate illumination Final illumination Intervening medium Intervening medium Intervening medium Time-reversal imaging is a standard method used in ultrasound medical and industrial imaging. It is customarily performed experimentally where a target is illuminated (insonified) in a first experiment with a plane wave (all transducers pulsed in phase) and then the target is re-illuminated with the transducers now pulsed using the time-reversed measured waves, etc. The net result after such a sequence of experiments is a set of waveforms, one for each transducer element, such that if these waveforms are used to excite the transducers in the array the transmitted wave will focus on the target—irrespective of the properties of the intervening medium between transducer array and target. Although the name “time-reversal” connotes the use of broad band wave fields (short time pulses) this is not necessary and the method works equally well with narrow band wave fields. For narrow band illumination the time-reversal process is identical to phase conjugation. Time-reversal imaging can be performed computationally without actually performing the sequence of experiments outlined above. To do this the multi-static response matrix K must be measured. This quantity is an NXN matrix, where N is the number of antenna (or transducer) elements. From this quantity the time-reversal matrix T=K*K (* standing for complex conjugate) is computed and each eigenvalue, eigenvector pair correspond to a different target. The eigenvalues give the scattering strength of the targets and the eigenvectors give the required exciting waveforms to focus on the associated target. Without time-reversal compensation With time-reversal compensation February 23, 2000 A.J. Devaney--BU presentation

3 Computational Time-reversal
Time-reversal compensation can be performed without actually performing a sequence of target illuminations Multi-static data Time-reversal processor Computes measured returns that would have been received after time-reversal compensation Target detection Target location estimation Multi-static data: Measured returns at each antenna element for pulse transmission from each element. Normally obtained by sequentially pulsing each antenna and measuring returns at all other elements. In TechSat 21 it is proposed to measure the multi-static data array K=Ki,j by simultaneously pulsing all elements using orthogonal coded waveforms or similar means. It is important to note that time-reversal processing does not require broad band waveforms and works equally well with narrow band or broad band signals. Time-reversal processor: Computes eigenvalues and eigenvectors of time reversal matrix which is equal to K*K. Eigenvalues are used for target detection and eigenvectors for target location estimation and imaging. Doppler: Used to isolate return from moving ground or air targets. Time reversal processing requires only the measured multi-static array K and, thus, needs no apriori knowledge of propagation medium (e.g., ionosphere), array geometry, etc. Target detection also requires no knowledge of propagation medium or array geometry, etc. However, target location estimation and other imaging tasks do require such knowledge. In practice (e.g., in ultrasound time-reversal imaging) it is customary to use homogeneous medium estimates of the required background Green functions for these purposes. Return signals from targets Time-reversal processing requires no knowledge of sub-surface and works for sparse three-dimensional and irregular arrays and both broad band and narrow band wave fields February 23, 2000 A.J. Devaney--BU presentation

4 Array Imaging In conventional scheme it is necessary to scan the
Illumination Measurement Back propagation Focus-on-transmit Focus-on-receive High quality image In conventional scheme it is necessary to scan the source array through entire object space Time-reversal imaging provides the focus-on-transmit without scanning Also allows focusing in unknown inhomogeneous backgrounds February 23, 2000 A.J. Devaney--BU presentation

5 Experimental Time-reversal Focusing
Single Point Target Illumination #1 Measurement Phase conjugation and re-illumination Intervening Medium Repeat … If more than one isolated point scatterer present procedure will converge to strongest if scatterers well resolved. February 23, 2000 A.J. Devaney--BU presentation

6 Multi-static Response Matrix
Scattering is a linear process: Given impulse response can compute response to arbitrary input Kl,j=Multi-static response matrix = impulse response of medium output from array element l for unit amplitude input at array element j. = K e Applied array excitation vector e Arbitrary Illumination Array output Single element Illumination Measurement February 23, 2000 A.J. Devaney--BU presentation

7 Mathematics of Time-reversal
= K e Applied array excitation vector e Arbitrary Illumination Array output Multi-static response matrix = K Array excitation vector = e Array output vector = v v = K e K is symmetric (from reciprocity) so that K†=K* T = time-reversal matrix = K† K = K*K Each isolated point scatterer (target) associated with different m value Target strengths proportional to eigenvalue Target locations embedded in eigenvector The iterative time-reversal procedure converges to the eigenvector having the largest eigenvalue February 23, 2000 A.J. Devaney--BU presentation

8 Processing Details Multi-static data Time-reversal processor
computes eigenvalues and eigenvectors of time-reversal matrix Eigenvalues Eigenvectors Return signals from targets Standard detection scheme Imaging Conventional MUSIC February 23, 2000 A.J. Devaney--BU presentation

9 Multi-static Response Matrix
Assumes a set of point targets Specific target Green Function Vector February 23, 2000 A.J. Devaney--BU presentation

10 A.J. Devaney--BU presentation
Time-reversal Matrix February 23, 2000 A.J. Devaney--BU presentation

11 Array Point Spread Function
February 23, 2000 A.J. Devaney--BU presentation

12 Well-resolved Targets
SVD of T February 23, 2000 A.J. Devaney--BU presentation

13 A.J. Devaney--BU presentation
Vector Spaces for W.R.T. Well-resolved Targets Signal Subspace Noise Subspace February 23, 2000 A.J. Devaney--BU presentation

14 Time-reversal Imaging of W.R.T.
February 23, 2000 A.J. Devaney--BU presentation

15 Non-well Resolved Targets
Signal Subspace Noise Subspace Eigenvectors are linear combinations of complex conjugate Green functions Projector onto S: Projector onto N: February 23, 2000 A.J. Devaney--BU presentation

16 A.J. Devaney--BU presentation
MUSIC Cannot image N.R.T. using conventional method Noise eigenvectors are still orthogonal to signal space Use parameterized model for Green function: STEERING VECTOR Pseudo-Spectrum February 23, 2000 A.J. Devaney--BU presentation

17 A.J. Devaney--BU presentation
GPR Simulation Antenna Model x z Uniformly illuminated slit of width 2a with Blackman Harris Filter February 23, 2000 A.J. Devaney--BU presentation

18 Ground Reflector and Time-reversal Matrix
February 23, 2000 A.J. Devaney--BU presentation

19 A.J. Devaney--BU presentation
Earth Layer 1 February 23, 2000 A.J. Devaney--BU presentation

20 Down Going Green Function
z=z0 February 23, 2000 A.J. Devaney--BU presentation

21 Non-collocated Sensor Arrays
Current Theory limited to collocated active sensor arrays Active Transmit Array Passive Receive Array Experimental time-reversal not possible for such cases Reformulated computational time-reversal based on SVD is applicable February 23, 2000 A.J. Devaney--BU presentation

22 Off-set VSP Survey for DOE
February 23, 2000 A.J. Devaney--BU presentation

23 A.J. Devaney--BU presentation
Acoustic Source February 23, 2000 A.J. Devaney--BU presentation

24 A.J. Devaney--BU presentation
Formulation Surface to Borehole Borehole to Surface We need only measure K (using surface transmitters) to deduce K+ February 23, 2000 A.J. Devaney--BU presentation

25 Time-reversal Schemes
Two different types of time-reversal experiments Start iteration from surface array Start iteration from borehole array. Multi-static data matrix no longer square Two possible image formation schemes Image eigenvectors of Tt Image eigenvectors of Tr February 23, 2000 A.J. Devaney--BU presentation

26 Singular Value Decomposition
Surface to Borehole Borehole to Surface Normal Equations Surface eigenvectors Start from surface array Time-reversal matrices Start from borehole array Borehole eigenvectors February 23, 2000 A.J. Devaney--BU presentation

27 Transmitter and Receiver Time-reversal Matrices
February 23, 2000 A.J. Devaney--BU presentation

28 Well-resolved Targets
w.r.t. receiver array Well-resolved w.r.t. transmitter array February 23, 2000 A.J. Devaney--BU presentation

29 A.J. Devaney--BU presentation
Future Work Finish simulation program Employ extended target Include clutter targets Include non-collocated arrays Compute eigenvectors and eigenvalues for realistic parameters Compare performance with standard ML based algorithms Broadband implementation Apply to experimental off-set VSP data February 23, 2000 A.J. Devaney--BU presentation


Download ppt "Computational Time-reversal Imaging"

Similar presentations


Ads by Google