1. 11- 1 Chapter 11

2.  Avoiding Logic Errors by Validating Input  What to Do If Input Errors Occur  Global Considerations in COBOL  When Data Should Be Validated  Understanding Program Interrupts  Other Methods for Improving Program Performance 11- 2

3.  Use DISPLAY statements during test runs to isolate logic errors  Include test data that produces size errors if ON SIZE ERROR routines are used  For every IF statement, use test data that satisfies and does not satisfy condition  Compile often 11- 3

4.  Risk of data entry errors is high ◦ Large volume of data entered ◦ Human error keying in data  Invalid input leads to inaccurate output ◦ For example, salary reported incorrectly if entered as 23000 instead of 32000  Input error can cause program interrupt ◦ For example, spaces entered for numeric field used in arithmetic operation 11- 4

5.  Use NUMERIC class test to ensure field used in arithmetic operation has numeric value If Amt-In Is Not Numeric Perform 500-Err-Rtn Else Add Amt-In To WS-Total End-If 11- 5 Example

6.  Use ALPHABETIC class test if field must be alphabetic  COBOL has built in functions for the following: ◦ Values greater than zero (POSITIVE) ◦ Values less than zero (NEGATIVE) ◦ Value equal to zero (ZERO)  S must be included in PIC to store a negative number  NOT POSITIVE is not same as NEGATIVE ◦ IF X IS POSITIVE THEN … 11- 6

7.  Check key fields if they must contain data If Soc-Sec-No = Spaces Perform 900-Err-Rtn End-If 11- 7 Example

8.  Useful for validity checking as well as other purposes  Two main functions ◦ To count number of occurrences of given character in field ◦ To replace specific occurrences of given character with another character 11- 8

9.  To count number of times a given character occurs INSPECT identifier-1 TALLYING ALL identifier-3 identifier-2 FOR LEADING literal-1 CHARACTERS 11- 9 Format

10.  identifier-1 ◦ Field to be "inspected"  identifier-2 ◦ Field where count stored ◦ Not automatically set to zero by INSPECT  identifier-3 or literal-1 ◦ Character to be counted ◦ ZERO, SPACE, 8, 'S' are valid entries for literal-1 11- 10

11.  ALL - every occurrence of specified character in field counted  LEADING - all occurrences of specified character preceding any other character tallied  CHARACTERS - all characters within field tallied ◦ Used to determine size of field  Example next slide 11- 11

12. Move Zeros To Ct1, Ct2, Ct3 Inspect X1 Tallying Ct1 For All Spaces Inspect X2 Tallying Ct2 For Characters Inspect X3 Tallying Ct3 For Leading Zeros FieldsResults X1 = bb82bCt1 = 3 X2 = AB32CCt2 = 5 X3 = 00060Ct3 = 3 11- 12 Examples

13.  Optional clause after FOR options to count only characters before or after some initial value BEFOREINITIALidentifier-4 AFTERliteral-2 11- 13 Format

14. Move Zeros To Ct4, Ct5 Inspect X4 Tallying Ct4 For All Zeros Before Initial 9 Inspect X5 Tallying Ct5 For Characters After Initial 6 ItemsResults X4 = 05090Ct4 = 2 X5 = 06762Ct5 = 3 11- 14 Examples

15.  To replace specified occurrences of a given character with another INSPECT identifier-1 REPLACING CHARACTERS ALL identifier-2BY identifier-3 LEADING literal-1 literal-2... FIRST 11- 15 Format

16.  Literals must be single characters or figurative constants consistent with type of field being inspected  ALL, LEADING, CHARACTERS have same meaning as previously noted  FIRST means first occurrence of literal-1 will be replaced by literal-2  BEFORE/AFTER clause can be used 11- 16

17. Inspect Date-In Replacing All '-' By '/' Inspect SSNo Replacing All Spaces By '-' FieldBeforeAfter Date-In10-17-0210/17/02 SSNo123 45 6789123-45-6789 11- 17 Examples

18. Inspect X1 Replacing Leading 'A' By 'Z' Inspect X2 Replacing First 'R' By 'Q' FieldBeforeAfter X1AAABBAZZZBBA X2RRSSTQRSST 11- 18 Examples

19.  Code often stored in field to shorten record and minimize typing by using the 88 numbered field  For example, 'H' or 'S' may represent pay type of 'Hourly' or 'Salaried'  Use condition names to check validity of coded fields  (covered this a few chapters ago) 11- 19

20. 05 Pay-CodePic X. 88HourlyValue 'H'. 88SalariedValue 'S'. If Hourly Or Salaried Then Perform Pay-Calc-Rtn Else Perform Pay-Code-Err-Rtn End-If 11- 20 Example Data Division entries Procedure Division statements

21.  Class test - determine if field contains appropriate type of data (NUMERIC, ALPHABETIC)  Determine if data is missing by comparing field to SPACES  Replace spaces in numeric fields with ZEROS using INSPECT statement 11- 21

22.  Range test - determine if field in established range  Limit test - determine if field exceeds established limit  Determine if field contains valid codes or values using condition-names to document and test fields  Can we use the inspect to solve our data entry problem of the lack of leading zeros and decimal spaces? 11- 22

23.  Perform class tests first to ensure field is proper type  Use EVALUATE for further validation tests  Three common forms 11- 23

24. EVALUATE identifier WHEN value(s) PERFORM … … Evaluate Pay-Code When 'H'Perform 300-Hourly-Rtn When 'S'Perform 400-Salaried-Rtn End-Evaluate 11- 24 Example

25.  May also use THRU clause to check range of values Evaluate Age When 0 Thru 19 Perform 400-Minor-Rtn When 20 Thru 99 Perform 500-Adult-Rtn End-Evaluate 11- 25 Example

26. EVALUATE TRUE WHEN condition PERFORM … … Evaluate True When Age >= 0 And <= 19 Perform 400-Minor-Rtn When Age >= 20 And <= 99 Perform 500-Adult-Rtn End-Evaluate 11- 26 Example

27.  Can also use with condition-names Assume these condition names defined for Age field 05 AgePic 99. 88MinorValues 0 Thru 19. 88AdultValues 20 Thru 99. 11- 27 Example

28. Evaluate True When Minor Perform 400-Minor-Rtn When Adult Perform 500-Adult-Rtn End-Evaluate 11- 28

29. EVALUATE condition WHEN TRUE PERFORM … WHEN FALSE PERFORM … Evaluate Age <= 19 When TruePerform 400-Minor-Rtn When FalsePerform 500-Adult-Rtn End-Evaluate 11- 29 Example

30. 1. Print error record displaying key field, field in error and error message 2. Stop the run to preserve data integrity 3. Partially process or bypass erroneous records 4. Stop the run if number of errors exceeds predetermined limit 11- 30

31. 5.Use switch/If or 88 field to indicate when record contains error ◦ Initialize field to 'N' for no errors ◦ Set field to 'Y' anytime an error occurs ◦ Process record as valid only if switch field still 'N' after all validation checks 11- 31

32. 6. Print count totals and compare to manual counts ◦ Print count of all records processed ◦ Print count of all errors encountered ◦ Print batch totals or count of all records within specific groups or batches 11- 32

33.  Meaning of comma and decimal point in numbers in United States is reversed in some other nations  4,123.45 in United States represented as 4.123,45 in other nations  To change representation of numbers in COBOL use SPECIAL-NAMES paragraph 11- 33

34. ** If you wanted to switch the, and. around Environment Division. Configuration Section. Special-Names. Decimal-Point is Comma.  Number 4123,45 stored in field with PIC 9999V99  When moved to report-item with PIC 9.999,99 is displayed as 4.123,45 11- 34

35.  Data Exception ◦ Performing operations on field containing blanks or other nonnumeric characters  Arithmetic operation  Comparison ◦ Failing to initialize subscript or index  Divide Exception - Attempting to divide by zero  Addressing Error ◦ Referring to array or table entry with value in subscript or index that exceeds number of entries in table ◦ Improperly coding nested PERFORMs or exiting from paragraph being performed 11- 35

36.  Operation Error ◦ Attempting to access file with READ or WRITE before opening it or after closing it  Specification Error ◦ Attempting to access input area after AT END condition  Illegal Character in Numeric Field ◦ May be caused by type mismatch between actual data and PIC clause ◦ Field size specified in PIC clause may not match actual size of field in record, leading to invalid (nonnumeric) characters from another field being treated as part of numeric field 11- 36

37.  Two types of program errors ◦ Syntax errors ◦ Logic errors  Error control procedures can minimize errors but not eliminate them entirely  Page 456 – way to input data file name from users instead of always hard-coding it.  READ…INTO Statement page 456  INITIALIZE statement 11- 37

38.  Types of error control procedures ◦ Range tests ◦ Limit tests ◦ Format tests ◦ Tests for missing data ◦ Sequence checks 11- 38

39.  Other methods to validate data ◦ INSPECT statement ◦ Condition-names ◦ EVALUATE verb ◦ Verifying input data 11- 39

40.  Handling input errors ◦ Stop the run ◦ Fill erroneous fields with spaces or zeros ◦ Stop the run if number of errors excessive ◦ Print control listings or audit trails to be checked 11- 40