Presentation is loading. Please wait.

Presentation is loading. Please wait.

Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 KEEE 4426 WEEK 12 CMOS FABRICATION PROCESS.

Published byJanice Riley Modified over 8 years ago

Similar presentations

Presentation on theme: "Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 KEEE 4426 WEEK 12 CMOS FABRICATION PROCESS."— Presentation transcript:

1 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 KEEE 4426 WEEK 12 CMOS FABRICATION PROCESS

2 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Fabrication Technology(1) nMOS Fabrication CMOS Fabrication –p-well process –n-well process –twin-tub process

3 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Fabrication Technology(2) All the devices on the wafer are made at the same time After the circuitry has been placed on the chip –the chip is overglassed (with a passivation layer) to protect it –only those areas which connect to the outside world will be left uncovered (the pads) The wafer finally passes to a test station –test probes send test signal patterns to the chip and monitor the output of the chip The yield of a process is the percentage of die which pass this testing The wafer is then scribed and separated up into the individual chips. These are then packaged

4 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Fabrication Technology(3)

5 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Fabrication Technology(4) Photolithography process

6 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Fabrication Technology(5) Resists negative: areas to be preserved are hardened after exposure to light positive: areas to be preserved are not exposed to light Exposure UV light used to sensitize the resist using a mask. Develop Resist areas that are exposed (positive) or not exposed (negative) are removed with an acid and water wash. resist protected area resist exposed area

7 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Fabrication Technology(6) Etch Areas that are exposed and not protected by the resist are etched with an acid and water wash. What is left are, depending on the layer being worked on, are patterns that expose underlying layers.

8 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Cmos Inverter Fabrication

9 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Cmos Inverter Fabrication

10 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Cmos Inverter Fabrication

11 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Layout of an Inverter Back is metallized to provide a good ground connection

12 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Step 1:Make the N-Well Top view Cross-sectional view Mask 1

13 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Step 2: Deposit Field Oxide

14 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Step 3: Open Field with Active Mask Mask 2

15 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Step 4: Deposit Gate Oxide The thickness and the quality of the gate oxide are two of the most critical fabrication parameters, since they strongly affect the operational characteristics of the MOS transistor, as well as its long-term reliability.

16 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Step 5: Deposit Polysilicon

17 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Step 6: Get Oxide Cut (etch) Mask 3

18 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Step 7: N-Diffusion Implant

19 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Step 8: P-Diffusion Implant

20 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Step 9:Deposit More Oxide

21 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Step 10: Contact Cut Etch Mask 4

22 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Step 11: Metal 1 Deposit Mask 5

23 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Step 12:Deposit More oxide

24 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Steps 13 & 14: Planarize(Polish) & Via Cut(Etch) Mask 6

25 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Step15: Metal 2 Deposition

26 Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 Step 16: Passivation Layer(Scratch Protect) Metal 1 Metal 2 Gate oxide Field Oxide Polysilicon N-Diffusion P-Diffusion npnp N well P substrate

Download ppt "Norhayati Soin 05 KEEE 4426 WEEK 12/1 3/13/2005 KEEE 4426 WEEK 12 CMOS FABRICATION PROCESS."

Similar presentations

CMOS Fabrication EMT 251.

CMOS Fabrication EMT 251.
Lecture 0: Introduction

Lecture 0: Introduction
Simplified Example of a LOCOS Fabrication Process

Simplified Example of a LOCOS Fabrication Process
EE141 © Digital Integrated Circuits 2nd Manufacturing 1 Digital Integrated Circuits A Design Perspective Manufacturing Process July 30, 2002.

EE141 © Digital Integrated Circuits 2nd Manufacturing 1 Digital Integrated Circuits A Design Perspective Manufacturing Process July 30, 2002.
CMOS Process at a Glance

CMOS Process at a Glance
Analog VLSI Design Nguyen Cao Qui.

Analog VLSI Design Nguyen Cao Qui.
VLSI Design Lecture 2: Basic Fabrication Steps and Layout

VLSI Design Lecture 2: Basic Fabrication Steps and Layout
EE141 © Digital Integrated Circuits 2nd Manufacturing 1 CMOS Process Manufacturing Process.

EE141 © Digital Integrated Circuits 2nd Manufacturing 1 CMOS Process Manufacturing Process.
VLSI Design EE213 Dr. Stephen Daniels.

VLSI Design EE213 Dr. Stephen Daniels.
Introduction to CMOS VLSI Design Lecture 0: Introduction

Introduction to CMOS VLSI Design Lecture 0: Introduction
Silicon Design Page 1 The Creation of a New Computer Chip.

Silicon Design Page 1 The Creation of a New Computer Chip.
Design and Implementation of VLSI Systems (EN1600) lecture04 Sherief Reda Division of Engineering, Brown University Spring 2008 [sources: Sedra/Prentice.

Design and Implementation of VLSI Systems (EN1600) lecture04 Sherief Reda Division of Engineering, Brown University Spring 2008 [sources: Sedra/Prentice.
11/8/2004EE 42 fall 2004 lecture 291 Lecture #29 CMOS fabrication, clocked and latched circuits Last lecture: PMOS –Physical structure –CMOS –Dynamic circuits.

11/8/2004EE 42 fall 2004 lecture 291 Lecture #29 CMOS fabrication, clocked and latched circuits Last lecture: PMOS –Physical structure –CMOS –Dynamic circuits.
Elettronica D. AA 2000-2001 Digital Integrated Circuits© Prentice Hall 1995 Manufacturing Process CMOS Manufacturing Process.

Elettronica D. AA Digital Integrated Circuits© Prentice Hall 1995 Manufacturing Process CMOS Manufacturing Process.
Design and Implementation of VLSI Systems (EN0160) Sherief Reda Division of Engineering, Brown University Spring 2007 [sources: Sedra/Prentice Hall, Saint/McGrawHill,

Design and Implementation of VLSI Systems (EN0160) Sherief Reda Division of Engineering, Brown University Spring 2007 [sources: Sedra/Prentice Hall, Saint/McGrawHill,
Lecture #51 Lecture #5 – VLSI Design Review zPhotolithography zPatterning Silicon zProcess steps used are: yStarts with Si wafer yThermal oxidation yPhotoresist.

Lecture #51 Lecture #5 – VLSI Design Review zPhotolithography zPatterning Silicon zProcess steps used are: yStarts with Si wafer yThermal oxidation yPhotoresist.
CSE477 L05 IC Manufacturing.1Irwin&Vijay, PSU, 2002 CSE477 VLSI Digital Circuits Fall 2002 Lecture 05: IC Manufacturing Mary Jane Irwin ( www.cse.psu.edu/~mji.

CSE477 L05 IC Manufacturing.1Irwin&Vijay, PSU, 2002 CSE477 VLSI Digital Circuits Fall 2002 Lecture 05: IC Manufacturing Mary Jane Irwin (
Device Fabrication Example

Device Fabrication Example
Introduction Integrated circuits: many transistors on one chip.

Introduction Integrated circuits: many transistors on one chip.
EE141 © Digital Integrated Circuits 2nd Manufacturing 1 Manufacturing Process I Dr. Shiyan Hu Office: EERC 518 Adapted and modified from Digital Integrated.

EE141 © Digital Integrated Circuits 2nd Manufacturing 1 Manufacturing Process I Dr. Shiyan Hu Office: EERC 518 Adapted and modified from Digital Integrated.

Similar presentations

Ads by Google