1. 1 Analysis of NGMN Requirements REQ 7: eNodeB Plug & Play Self Commissioning

2. Slide title :32-35pt Color: R153 G0 B0 Corporate Font : FrutigerNext LT Medium Font to be used by customers and partners : Arial Slide text :20-22pt Bullets level 2-5: 18pt Color:Black Corporate Font : FrutigerNext LT Medium Font to be used by customers and partners : Arial Top right corner for field-mark, customer or partner logotypes. ---------------- The following nine groups of colors are an example of how our design colors can be used, please take note that you should only use one design color group per slide. For specific usage details, refer to the “Typesetting Standard”. 2 Specifications Related 3GPP SA5 specifications Self-Configuration of Network Element Integration Reference Point (IRP)  TS 32.50x (x=1,2,3,5,7) Current Status of the specifications TS 32.50x was introduced in Rel-8, and updated in Rel-9

3. Slide title :32-35pt Color: R153 G0 B0 Corporate Font : FrutigerNext LT Medium Font to be used by customers and partners : Arial Slide text :20-22pt Bullets level 2-5: 18pt Color:Black Corporate Font : FrutigerNext LT Medium Font to be used by customers and partners : Arial Top right corner for field-mark, customer or partner logotypes. ---------------- The following nine groups of colors are an example of how our design colors can be used, please take note that you should only use one design color group per slide. For specific usage details, refer to the “Typesetting Standard”. 3 eNodeB Plug & Play Self Commissioning RequirementsExisting 3GPP Standards Status In order to take full advantage of the eNodeB Plug & Play functionality the deployment and installation process must not contain more than the following steps  eNodeB Hardware installed on site  eNodeB powered on  eNodeB connected to Network Operators IP Network Result: “eNodeB is properly on air” and can be taken into commercial service by the operator TS 32.50x supports this.