Presentation is loading. Please wait.

Presentation is loading. Please wait.

HOW I MADE A NEWSPAPER FLOWFORM 1 Use PgDn Key to Move to the next page. Every now and then I try to use terms used by Harold Prinzler in his page: Flowform.

Similar presentations


Presentation on theme: "HOW I MADE A NEWSPAPER FLOWFORM 1 Use PgDn Key to Move to the next page. Every now and then I try to use terms used by Harold Prinzler in his page: Flowform."— Presentation transcript:

1

2 HOW I MADE A NEWSPAPER FLOWFORM 1 Use PgDn Key to Move to the next page. Every now and then I try to use terms used by Harold Prinzler in his page: Flowform FF03A Flowform FF03A Visit also http://www.kitemonger.com/kiteplan/airmonger/index.html to see‘How to Put Together a Flow Form Type Kite’http://www.kitemonger.com/kiteplan/airmonger/index.html

3 My workspace and the material I've used 2

4 Templates and a newspaper Wiener Kurir 3

5 4 Template again and a washer to mark seam line when the line is curved

6 I've already cut out the parts of the flowform 5

7 I've used white glue; it was easy to glue when the line was straight 6

8 7

9 8

10 9

11 10 Now the glue is dry

12 11 Aids for rib forming ( Harald Prinzler puts it); of two-layers newspaper

13 12 The aids for rib forming have been glued to the inside of the bottom

14 13

15 14 A thread glued to both of the trailing edges of the kite for a drogue to be attached later perhaps

16 15 I marked the trailing edges and part of the the jet chute IN BLACKINK; along this line the bottom and top surface are to be glued

17 16

18 17 Keels

19 18 I’ve begun gluing the top surface starting from the leading edge

20 19 See?

21 20 I’ve soon learnt that it would be better to glue the top surface to the upper seam of the ribs in small parallel steps of about 1.5 cm (about 0.5") to make life easier

22 21

23 22

24 23

25 24 I’ve used these boxes to keep the ribs upright while gluing

26 25

27 26

28 27

29 28

30 29

31 30

32 31 Step by step

33 32

34 33 I’ve almost reached the end of the middle ribs

35 34

36 35

37 36 I’ve reached the end of those ribs

38 37

39 38 The first line of the aids for rib forming has been glued

40 39 Poor old lady’s face got wrinkled

41 40

42 41

43 42

44 43 Its profile

45 44

46 45

47 46

48 47

49 48

50 49

51 Hungarian daily newspaper flowform kite NÉPSZAVA szárnyszelvény-sárkány Zmeu profil de aripa Flowform de papel

52

53

54

55

56

57

58 57 When I make a Tyvek kite, I purchase the material herehere

59


Download ppt "HOW I MADE A NEWSPAPER FLOWFORM 1 Use PgDn Key to Move to the next page. Every now and then I try to use terms used by Harold Prinzler in his page: Flowform."

Similar presentations


Ads by Google