1. Module 5 Planning and Deploying Message Transport in Microsoft® Exchange Server 2010

2. Module Overview Designing Message Routing for Exchange Server 2010 Designing Hub Transport Servers Designing the Message Routing Perimeter

3. Lesson 1: Designing Message Routing for Exchange Server 2010 Overview of Message Transport Components in Exchange Server 2010 Default Message Routing Configuration in Exchange Server 2010 Modifying the Default Message Routing Topology Designing Message Routing to Mitigate the Effects of Message Routing Failure

4. Overview of Message Transport Components in Exchange Server 2010 ComponentDescription Submission queueStores all messages on disk until processed Store driver Retrieves messages from sender’s Outbox Microsoft Exchange Mail Submission service Notifies a Hub Transport server in the local Active Directory site when a message is available for retrieval from a sender’s Outbox Categorizer Processes one message at a time from the Submission queue Pickup directory Submits messages to the Submission queue

5. Default Message Routing Configuration in Exchange Server 2010 20 10 Destination site Delayed fan-out 10 Source site Default message flow Site 1 Site 2 Site 3 Site 4

6. Modifying the Default Message Routing Topology 5 5 5 5 10 Hub site 20 Distribution group expansion server 10 Hub site Exchange routing costs

7. Designing Message Routing to Mitigate the Effects of Message Routing Failure 20 10 Source site Destination site 10 Queue at the point of failure

8. Lesson 2: Designing Hub Transport Servers Hardware Requirements for Hub Transport Servers Default Hub Transport Server Configuration Planning SMTP Send and Receive Connectors Planning for Internal SMTP Relay Designing Accepted Domains and Remote Domains Designing Message Throttling, Back Pressure, and Size Limits Troubleshooting Internal Message Delivery

9. Hardware Requirements for Hub Transport Servers FactorsRecommendations Processor cores 12 cores maximum Memory1 GB memory per core, minimum of 4 GB Hard disk Optimize disk subsystem, and ensure sufficient free space Network connections Keep drivers up-to-date Server ratios Mailbox to Hub Transport: between 5:1 and 7:1

10. Default Hub Transport Server Configuration ComponentDescription Accepted domains Define the SMTP namespaces for which the Exchange Server organization receives e-mail Remote domains Define message settings to external domains Receive connectors Enable inbound SMTP communications. By default, two receive connectors exist on each Hub Transport server Transport agents Perform tasks that support messaging policy and compliance, journaling, and assist with AD RMS functionality

11. Planning SMTP Send and Receive Connectors Configuring Internet mail flow through a subscribed Edge Transport server Configuring Internet mail flow directly through a Hub Transport server Configuring external SMTP relay Configuring internal SMTP relay Configuring Internet mail flow through Exchange Hosted Services, or an external SMTP gateway The configuration of Send and Receive connectors depends upon how you implement mail flow Mail flow options include:

12. A. Datum forest Planning for Internal SMTP Relay Edge Transport MX: adatum.com MX: contoso.com Send Connectors Hub Transport Edge Transport Contoso forest

13. Designing Accepted Domains and Remote Domains Remote domains define SMTP domains that are external to your Exchange Server organization. Properties include: Accepted domains define SMTP domain names for which the Exchange server will accept e-mail. Accepted domains can be: Authoritative domains Internal relay domains External relay domains Out-of-office message delivery Message format options, including acceptable character sets

14. Designing Message Throttling, Back Pressure, and Size Limits Exchange Server features that enable you to control message flow are: Message throttling Back pressure Message size limits

15. Troubleshooting Internal Message Delivery Exchange Server 2010 provides several tools for troubleshooting SMTP message delivery: Exchange Server Best Practices Analyzer Exchange Mail Flow Troubleshooter Queue Viewer Message Tracking Routing Log Viewer Protocol Logging Telnet

16. Lesson 3: Designing the Message Routing Perimeter Default Edge Transport Server Configuration Designing Edge Subscriptions Designing Outbound Message Flow Designing Inbound Message Flow Designing Message Routing to the Perimeter Planning Address Rewriting

17. Default Edge Transport Server Configuration ComponentDescription Transport agents Perform tasks that support message hygiene, address rewriting, and other functions Connectors Enable inbound and outbound SMTP communications Accepted domains Define the SMTP namespaces for which the Exchange organization sends and receives e-mail A critical role of the Edge Transport server is message hygiene

18. Considerations for designing edge subscriptions : Designing Edge Subscriptions An Edge Transport server can only be subscribed to a single Active Directory site An Edge subscription is specific to each Edge Transport server Deploy multiple Edge Transport servers to enable high availability and load balancing

19. Considerations for designing outbound message flow: Designing Outbound Message Flow Will you use a single location for routing all messages to the Internet, or will you enable message routing through multiple locations? How will you configure the SMTP Send connectors? Use Edge synchronization to configure the SMTP Send connectors Create additional SMTP Send connectors Manually configure Send connectors for Internet e-mail How will you configure DNS lookups?

20. Considerations for designing inbound message flow: Designing Inbound Message Flow Will you use a single location for inbound routing from the Internet, or will you enable message routing through multiple locations? If you are going to implement multiple inbound routing points, how will you design the MX records? How will you configure SMTP Receive connectors?

21. When designing message routing to the network perimeter, determine whether to: Considerations for multiple Active Directory sites: Designing Message Routing to the Perimeter Use an Edge Transport server Configure an Edge subscription Determine whether to implement a single path or multiple paths for routing messages Plan the internal message routing when using multiple paths Use the connector scope to control whether messages are sent between Active Directory sites

22. Planning Address Rewriting Address rewriting scenarios include: Considerations for address rewriting: Group consolidation Mergers and acquisitions Partners Outbound-only address rewriting Bidirectional address rewriting Priority of address rewriting entries Digitally signed, encrypted, or rights-protected e-mail

23. Lab: Planning and Deploying Message Transport in Exchange Server 2010 Exercise 1: Designing a Message Routing Topology Exercise 2: Designing a Messaging Perimeter Exercise 3: Discussion: Improving an Active Directory and Message Routing Design Exercise 4: Modifying the Routing Topology Logon information Estimated time: 75 minutes

24. Lab Scenario You are a messaging engineer for A. Datum Corporation, an enterprise-level organization with multiple locations. You have been tasked with designing the new routing infrastructure for your organization. You must examine the documentation that details the existing infrastructure, and then make proposals regarding any changes you might need to make to address the organization’s needs. You must also document your proposals. Finally, use various Exchange Server management tools to investigate the current routing topology and make some changes.

25. Lab Review In exercise 4, task 7, you examined the routing topology. You discovered that there were new connectors. Where did these connectors come from? In exercise 4, task 7, there is an address space entry under SMTP, which is denoted with a single asterisk. What does this mean?

26. Module Review and Takeaways Review Questions