1. Chapter 6: Errors, Error Detection, and Error Control Data Communications and Computer Networks: A Business User’s Approach Third Edition

2. Data Communications & Computer Networks: A Business User's Approach, Third Edition2 Objectives After reading this chapter, you should be able to: Identify the different types of noise commonly found in computer networks Specify the different error-prevention techniques, and be able to apply an error-prevention technique to a type of noise Compare the different error-detection techniques in terms of efficiency and efficacy

3. Data Communications & Computer Networks: A Business User's Approach, Third Edition3 Objectives (continued) Perform simple parity and longitudinal parity calculations, and enumerate their strengths and weaknesses Cite the advantages of cyclic redundancy checksum, and specify what types of errors cyclic redundancy checksum will detect Differentiate between the three basic forms of error control, and describe the circumstances under which each may be used

4. Data Communications & Computer Networks: A Business User's Approach, Third Edition4 Objectives (continued) Follow an example of Stop-and-wait ARQ, Go- back-N ARQ, and Selective-reject ARQ

5. Data Communications & Computer Networks: A Business User's Approach, Third Edition5 Introduction Noise is always present If a communications line experiences too much noise Signal will be lost or corrupted Communication systems should check for transmission errors Once an error is detected, a system may perform some action Some systems perform no error control, but simply let the data in error be discarded

6. Data Communications & Computer Networks: A Business User's Approach, Third Edition6 Noise and Errors – White Noise Also known as thermal or Gaussian noise Relatively constant Can be reduced If white noise gets to strong Can completely disrupt signal

7. Data Communications & Computer Networks: A Business User's Approach, Third Edition7 White Noise (continued)

8. Data Communications & Computer Networks: A Business User's Approach, Third Edition8 Impulse Noise One of the most disruptive forms of noise Random spikes of power Can destroy one or more bits of information Difficult to remove from an analog signal May be hard to distinguish from original signal Impulse noise can damage more bits if the bits are closer together (transmitted at a faster rate)

9. Data Communications & Computer Networks: A Business User's Approach, Third Edition9 Impulse Noise (continued)

10. Data Communications & Computer Networks: A Business User's Approach, Third Edition10 Impulse Noise (continued)

11. Data Communications & Computer Networks: A Business User's Approach, Third Edition11 Crosstalk Unwanted coupling between two different signal paths For example, hearing another conversation while talking on the telephone Relatively constant Can be reduced with proper measures

12. Data Communications & Computer Networks: A Business User's Approach, Third Edition12 Crosstalk (continued)

13. Data Communications & Computer Networks: A Business User's Approach, Third Edition13 Echo The reflective feedback of a transmitted signal as the signal moves through a medium Most often occurs on coaxial cable If echo bad enough, it could interfere with original signal Relatively constant Can be significantly reduced

14. Data Communications & Computer Networks: A Business User's Approach, Third Edition14 Echo (continued)

15. Data Communications & Computer Networks: A Business User's Approach, Third Edition15 Jitter The result of small timing irregularities during transmission of digital signals Occurs when a digital signal is repeated over and over If serious enough, jitter forces systems to slow down their transmission Steps can be taken to reduce jitter

16. Data Communications & Computer Networks: A Business User's Approach, Third Edition16 Jitter (continued)

17. Data Communications & Computer Networks: A Business User's Approach, Third Edition17 Delay Distortion and Attenuation Delay Distortion - occurs because the velocity of propagation of a signal through a medium varies with the frequency of the signal Can be reduced Attenuation - the continuous loss of a signal’s strength as it travels through a medium

18. Data Communications & Computer Networks: A Business User's Approach, Third Edition18 Error Prevention To prevent errors from happening, several techniques may be applied: Proper shielding of cables to reduce interference Telephone line conditioning or equalization Replacing older media and equipment with new, possibly digital components Proper use of digital repeaters and analog amplifiers Observe the stated capacities of the media

19. Data Communications & Computer Networks: A Business User's Approach, Third Edition19 Error Prevention (continued)

20. Data Communications & Computer Networks: A Business User's Approach, Third Edition20 Error Detection Despite best prevention techniques, errors may still occur To detect an error, error detection code has to be added to the data/signal Let’s examine two basic techniques for detecting errors: Parity checking Cyclic redundancy checksum

21. Data Communications & Computer Networks: A Business User's Approach, Third Edition21 Parity Checks Simple parity - If performing even parity, add a parity bit such that an even number of 1s is maintained If performing odd parity, add a parity bit such that an odd number of 1s is maintained For example, send 1001010 using even parity For example, send 1001011 using even parity

22. Data Communications & Computer Networks: A Business User's Approach, Third Edition22 Parity Checks (continued) What happens if the character 10010101 is sent and the first two 0s accidentally become two 1s? Thus, the following character is received: 11110101 Will there be a parity error? Problem: Simple parity only detects odd numbers of bits in error

23. Data Communications & Computer Networks: A Business User's Approach, Third Edition23 Longitudinal Parity Longitudinal parity Adds parity bit to each character Then adds row of parity bits after a block of characters Row of parity bits is actually a parity bit for each “column” of characters Row parity bits plus column parity bits add a great amount of redundancy to a block of characters

24. Data Communications & Computer Networks: A Business User's Approach, Third Edition24 Longitudinal Parity (continued)

25. Data Communications & Computer Networks: A Business User's Approach, Third Edition25 Longitudinal Parity (continued)

26. Data Communications & Computer Networks: A Business User's Approach, Third Edition26 Parity Checks (continued) Both simple parity and longitudinal parity do not catch all errors Simple parity only catches odd numbers of bit errors Longitudinal parity is better at catching errors But requires too many check bits added to a block of data We need a better error detection method What about cyclic redundancy checksum?

27. Data Communications & Computer Networks: A Business User's Approach, Third Edition27 Cyclic Redundancy Checksum (CRC) CRC error detection method treats packet of data to be transmitted as a large polynomial Transmitter Using polynomial arithmetic, divides polynomial by a given generating polynomial Quotient is discarded Remainder is “attached” to the end of message

28. Data Communications & Computer Networks: A Business User's Approach, Third Edition28 Cyclic Redundancy Checksum (continued) Message (with the remainder) is transmitted to the receiver Receiver divides the message and remainder by same generating polynomial If a remainder not equal to zero results  error during transmission If a remainder of zero results  error during transmission

29. Data Communications & Computer Networks: A Business User's Approach, Third Edition29 Cyclic Redundancy Checksum (continued)

30. Data Communications & Computer Networks: A Business User's Approach, Third Edition30 Error Control Once an error is detected, what is the receiver going to do? 1.Do nothing 2.Return an error message to the transmitter 3.Fix the error with no further help from the transmitter

31. Data Communications & Computer Networks: A Business User's Approach, Third Edition31 Error Control (continued) Do nothing Seems like a strange way to control errors Some newer systems such as frame relay perform this type of error control Return a message has three basic formats: 1.Stop-and-wait ARQ 2.Go-back-N ARQ 3.Selective-reject ARQ

32. Data Communications & Computer Networks: A Business User's Approach, Third Edition32 Stop-and-wait ARQ Simplest error control protocol A transmitter sends a frame then stops and waits for an acknowledgment If a positive acknowledgment (ACK) is received, the next frame is sent If a negative acknowledgment (NAK) is received, the same frame is transmitted again

33. Data Communications & Computer Networks: A Business User's Approach, Third Edition33 Stop-and-wait ARQ (continued)

34. Data Communications & Computer Networks: A Business User's Approach, Third Edition34 Go-back-N ARQ Go-back-N ARQ and selective reject are more efficient protocols They assume that multiple frames are in transmission at one time (sliding window) A sliding window protocol allows transmitter to send up to the window size frames before receiving any acknowledgments When a receiver does acknowledge receipt, the returned pack contains the number of the frame expected next

35. Data Communications & Computer Networks: A Business User's Approach, Third Edition35 Sliding Window Protocol

36. Data Communications & Computer Networks: A Business User's Approach, Third Edition36 Go-back-N ARQ (continued) Using the go-back-N ARQ protocol, if a frame arrives in error, the receiver can ask the transmitter to go back to the Nth frame and retransmit it After the Nth frame is retransmitted, the sender resends all subsequent frames

37. Data Communications & Computer Networks: A Business User's Approach, Third Edition37 Selective-reject ARQ Most efficient error control protocol If a frame is received in error, the receiver asks transmitter to resend ONLY the frame that was in error Subsequent frames following the Nth frame are not retransmitted

38. Data Communications & Computer Networks: A Business User's Approach, Third Edition38 Selective-reject ARQ (continued)

39. Data Communications & Computer Networks: A Business User's Approach, Third Edition39 Selective-reject ARQ (continued)

40. Data Communications & Computer Networks: A Business User's Approach, Third Edition40 Selective-reject ARQ (continued)

41. Data Communications & Computer Networks: A Business User's Approach, Third Edition41 Selective-reject ARQ (continued)

42. Data Communications & Computer Networks: A Business User's Approach, Third Edition42 Correct the Error For a receiver to correct the error with no further help from the transmitter requires a large amount of redundant information accompanying original data This redundant information allows the receiver to determine the error and make corrections This type of error control is often called forward error correction

43. Data Communications & Computer Networks: A Business User's Approach, Third Edition43 Error Detection in Action Asynchronous transfer mode (ATM) incorporates many types of error detection and error control ATM inserts a CRC into the data frame (the cell), which checks only the header and not the data This CRC is also powerful enough to perform simple error correction on the header A second layer of ATM applies a CRC to the data, with varying degrees of error control

44. Data Communications & Computer Networks: A Business User's Approach, Third Edition44 Summary Noise in computer networks Error-prevention techniques Simple parity and longitudinal parity calculations Cyclic redundancy checksum Three forms of error control Stop-and-wait ARQ, Go-back-N ARQ and Selective-reject ARQ