1. Reproduction interdite © ALMA EUROPEAN CONSORTIUM Reproduction forbidden Design, Manufacture, Transport and Integration in Chile of ALMA Antennas Page 1 Design, Manufacture, Transport and Integration on-site in Chile of ALMA Antennas ADJUSTER SYSTEM PM#05 21 June 2006

2. Reproduction interdite © ALMA EUROPEAN CONSORTIUM Reproduction forbidden Design, Manufacture, Transport and Integration in Chile of ALMA Antennas Page 2 Contractor responsibilities concerning adjusters and adjusters setting tools Manufacturing, assembly, acceptance testing and transportation of the adjusters. The contractor shall define (and agree with AAS-I) a technical solution to install sensors on the adjusters for automatic identification and setting. Design, development, manufacturing, assembly, qualification & acceptance testing and transportation of the following tools: Adjusters setting tools for manual panel positioning Adjusters setting tools for automatic panel positioning

3. Reproduction interdite © ALMA EUROPEAN CONSORTIUM Reproduction forbidden Design, Manufacture, Transport and Integration in Chile of ALMA Antennas Page 3 Hardware and tools delivery (SOW)

4. Reproduction interdite © ALMA EUROPEAN CONSORTIUM Reproduction forbidden Design, Manufacture, Transport and Integration in Chile of ALMA Antennas Page 4 Adjusters System w.r.t. ALMA prototype Adjusters differences in comparison with the ALMA prototype concept:  Adjusters Design: Bell base with three feet (previously four) MMA with different stroke (different thread pitch)  Manufacturing and Tools: Bell base manufactured with different compression molding process due to the possible selection of a different manufacturer. Sensors implementation for adjusters identification Design of an automatic adjuster setting tool

5. Reproduction interdite © ALMA EUROPEAN CONSORTIUM Reproduction forbidden Design, Manufacture, Transport and Integration in Chile of ALMA Antennas Page 5 Adjusters System Testing Delta-qualification tests will be performed in order to verify the adjusters changes occurred from the ALMA prototype manufacturing and nowadays. Qualification of design changes are under AAS-I responsibility (presented last PM#04), the remaining ones under Supplier responsibility Expected required time is 3 months Qualification tests results shall be the go-ahead for the authorization to proceed of the manufacturing of the required adjusters and tools

6. Reproduction interdite © ALMA EUROPEAN CONSORTIUM Reproduction forbidden Design, Manufacture, Transport and Integration in Chile of ALMA Antennas Page 6 1.Hot, Cold and Damp exposure and Temperature Cycling of the bell base + bellow (according to IEC 68-2-x or equivalent standard) 2.Thermal Conductivity and CTE (TBC) 3.Static and Fatigue test (TBC) Manufacturing Δ-Qualification Tests

7. Reproduction interdite © ALMA EUROPEAN CONSORTIUM Reproduction forbidden Design, Manufacture, Transport and Integration in Chile of ALMA Antennas Page 7 Adjusters Acceptance Tests TestAdjusters ADJUSTERS Visual inspectionX 4 units 1 st batch 100 units 2 nd batch 300 units 3 rd batch 300 units 4th batch 300 units 5 th batch 300 units 6 th batch Total 1304 Units MassX InterfacesX Electrical BondingX Adjusters automatic and manual setting (sensors and functional verification) X Batch acceptance procedure The batch shall be accepted only in case of defects detection on a lower or equal numbers of adjuster defined in the following: 1st batch 0 defects over 4 adjusters 2nd batch 1 defect in a sample of 100 adjusters 3rd batch 2 defects in a sample of 300 adjusters 4th batch 2 defects in a sample of 300 adjusters 5th batch 2 defects in a sample of 300 adjusters 6th batch 2 defects in a sample of 300 adjusters

8. Reproduction interdite © ALMA EUROPEAN CONSORTIUM Reproduction forbidden Design, Manufacture, Transport and Integration in Chile of ALMA Antennas Page 8 Adjusters setting tools Qualification/Acceptance Tests Test Registration tool First tools unitAll tools Visual inspectionXX MassXX InterfacesXX Electrical BondingXX Functionality checkXX Data downloading (Automatic tool only)XX Drop test (Automatic tool only)X