1. Fluid Mechanics Lab Report Presentations Budapest University of Technology and Economics DEPARTMENT OF FLUID MECHANICS 200?. ??. ??. Fluid Mechanics lab report presentation Measurement Group Members: X… Y… (Measurement Leader)PRT235 W… Z…45GG65 T… S…ERS332 0.3 min. ? Title of Measurement ? Instructor : X… Y…

2. 2.Fluid Mechanics lab report presentation Short Description of the Measurement Goal of the measurement: One or two sentences Description of the measurement task What did we measure? What did we measure with? 1 min.

3. 3.Fluid Mechanics lab report presentation Description of the measurement set-up It is enough to just put key words here, since you should present the measurement set- up in your own words. It is important that you only present those scenarios which you actually measured and not the general ones which can be found in the measurement guide. 1.5 min.

4. 4.Fluid Mechanics lab report presentation The applied formulas Put the basic equations along with one example of how you applied the equation in your report. Equations  Determination of the density AND  Determination of the volume flow rate AND  Determination of the loss coefficient AND/OR  Determination of the efficiency AND/OR  … 1 min.

5. 5.Fluid Mechanics lab report presentation The investigated physical parameter (this can be on multiple slides max 3.) Parameters: … 2 min. From this it can be well seen that… This can be explained by… (It is enough to just say these, and they do not necessarily have to be on the slides.

6. 6.Fluid Mechanics lab report presentation Experiences The conclusions which can be drawn from the measurement results, conclusion and summary: In your own words state whether the measurement was useful for you or not, and why. Constructive criticism is welcome. What kind of conclusions can be drawn about the measured values or the fluid mechanical phenomena (ex. Based on the error calculation a certain kind of phenomena can be measured with what kind of preciseness…) We happily accept any constructive criticism about how to improve the different measurements. 1 min.

7. 7.Fluid Mechanics lab report presentation IMPORTANT !!!!!!!!!!!!!!!!!! The red parts in this PowerPoint obviously need to be deleted and your own information needs to be added. The titles as well as the wording should be formulated to your own taste. This is just a tool to help you set-up your own presentation. The time increments given on the slides are not mandatory, but serve as a guide to help you plan your presentation. It is strongly suggested that you practice at home before presenting to the class! Do not make your presentation too short or too long! Min. 6.5 min., Max. 8 min.! The file name should be the NEPTUN code of the measurement leader! In order to upload your presentation to Poseidon, you also need to know your NEPTUN code. The link for uploading your presentation is: http://www.ara.bme.hu/hallgato/ „USER NAME” and „PASSWORD” are the measurement leader’s NEPTUN code!!! You must upload your presentation prior to the class.