1. Proper Automotive Waste Management - Solutions By Christine Flowers and Raleigh Ross Sponsored by the California Integrated Waste Management Board

2. Waste Reduction Pollution Prevention Waste Minimization Recycling Waste Management

3. Pollution Prevention Using materials, processes, or practices, that reduce or eliminate pollution or wastes at the source. Other terms: waste reduction, waste minimization, source reduction.

4. Ways to Manage Pollution 1st Choice is Source Reduction 2nd is Recycling 3rd is Treatment Last Resort is Proper Disposal.

5. Waste Minimization Methods Source Reduction Inventory Control Material and Process Substitution

6. Recycling Why Reduce, Reuse, and Recycle? Substitute a less toxic substance Use sound operating practices Change the processes Recycle wastes that cannot be reduced or reused

7. Waste Management Why Should a Shop Properly Manage Its Wastes? Practices/EfficienciesParticipation Keeping the Shop Clean Storage

8. Waste Management Spill Control Spill prevention equipment Water Troughs for Secondary Containment of Used Oil and Waste Antifreeze Funnel Drum Covers Bulk, Pressurized, Overhead Fluid Delivery Waste Water Contamination

9. Spill Prevention 2-1 (a) Spill Prevention and Cleanup Avoid spilling hazardous materials -- work carefully and take precautions. Spills and leaks are likely to occur at or during: Oil changes Radiator repair Radiator flush and fill Parts washing Carrying dripping parts across the room

10. Spill Prevention 2-2 (a) Tips to Preventing Spills Practice good housekeeping - clutter increases spills and accidents. Keep work areas neat and clean Put all tools, equipment and materials away when not in use. Work carefully to avoid accidents. Don’t put containers of liquids where they might be knocked over.

11. Spill Prevention 2-2 (b) Tips to Preventing Spills Cover drains in work area to stop spills from entering. Use drip pans underneath work areas to catch spills. Use drip pans every time spills are possible. Drain wet parts on drip pans or racks. Use funnels when filling all containers.

12. Spill Prevention 2-3 (a) What to Do When Spills Occur Quickly stop the source of the spill. Prevent the spill from leaving the facility. Cover drains or block doorways. Absorb the spill using a reusable material such as a mop & bucket or launderable rags. Put spill materials in appropriate waste container for recovery if feasible. Material that can’t be recovered -- Store labeled, sealed containers prior to disposal.