1. Zack Burchman Travis Gang Dana Geer Ryan Neary Matt Seekins Faculty Advisor: Mike Rosen GMCR Contacts: Wade Hodge Paul Comey Jason King

2.  Designed the foundation for entire K-Cup recycling process  Focus on detailed design and construction of foil weld and coffee ground removal sub-systems

3.  Lid/No Lid Sensor  Heat and Punch Component Will break foil weld Fully automated  Vacuum Will remove foil and grounds Fully automated

4.  Heating element custom made by Watlow Electric Manufacturing Company  Pneumatic pistons will drive motion  Cup is raised to contact heating element, lowered, then punch lowers to break weld

6.  Mimic a design used at GMCR  Exploits Venturi effect with a pressure differential  Compressed air blows into a pipe creating a flow in one direction  At the ends of the pipe, air will enter and exit with respect to the created flow  The entrance end will be exposed to the lid and ground to suck them up

7.  Current vacuums in use

8.  Winter Break: Team members research and design designated parts  We will conduct compatibility checks and purchase parts throughout January  February Dana begins work on building the vacuum and cup holder Travis and Zack begin building the riser system, and later start the punch Matt will test the sensors and power supply while designing the control system Everyone is helping design and purchase the framework

9.  March Dana begins to test on the cup holder and will finish the vacuum and begin to troubleshoot it Travis and Zack start the heating element and continue building the punch, testing begins on the riser and later on the punch and heating element Matt begins to integrate the control system, sensors, and power supply to the machine The framework building begins

10.  April Everything is built and each individual parts are tested and debugged It is all put together and debugged

11. Start Design Heat/Punch Design Vacuum Sensors Heating System Punching System Power Supply Design Framework Control subsystems Vacuum System Build Framework Test Subsystems Assembled Machine Integrate Control Subsystems Test Machine 4 2 4 4 3 3 3 1 1 3 2 2 1 1 4 2 2 2 1 43 1 Critical Path: 14 weeks

12.  Cup is placed into die  A force is applied to the punch  Punch comes down slicing off ring  Cup falls down through the die and moves on to next stage for sorting  The ring, which remains on top of the die, is blow off into a waste compartment  Adaptable to any system  3 steel rods, bearings, springs

13. Thanks to GMCR for coming out!