Presentation is loading. Please wait.

Presentation is loading. Please wait.

Pop-up Evergreen Tree. Designed by Robert Sabuda.

Similar presentations


Presentation on theme: "Pop-up Evergreen Tree. Designed by Robert Sabuda."— Presentation transcript:

1 Pop-up Evergreen Tree

2 Designed by Robert Sabuda

3 Step 1: Print out this page on a heavy paper, like card stock or construction paper.

4

5 Step 2: Print out this page on a heavy paper, like card stock or construction paper.

6

7 Step 3: Lay the card that has the outline of the tree on a flat surface. Use a pencil to write your name on the side that has the black lines. Take a ruler and line the edge of it up against the center fold line of the card

8 Lay the card that has the outline of the tree on a flat surface. Use a pencil to write your name on the side with the black lines, Take a ruler and line the edge of it up against the center fold line of the card Step 3

9 Step 4: Use the rounded end of a paper clip (or a ball point pen that has run out of ink) and press it along the dotted line carefully scoring the card all the way from top to bottom. Score all the other dotted lines on the card as well.

10 Use the rounded end of a paper clip (or a ball point pen that has run out of ink) and press it along the dotted line carefully scoring the card all the way from top to bottom. Score all the other dotted lines on the card as well. Step 4

11 Step 5: Cut the card out carefully following the solid, black lines around the edges.

12 Cut the card out carefully following the solid, black lines around the edges. Step 5

13 Step 6: Begin to fold the card in half, keeping the outline of the tree on the OUTSIDE so you can always see it.

14 Begin to fold the card in half, keeping the outline of the tree on the OUTSIDE so you can always see it. Step 6

15 Step 7: Fold the card completely in half with the outline of the tree still visible

16 Step 7 Fold the card completely in half with the outline of the tree still visible.

17 Carefully cut along the SOLID black line of the first segment at the top of the tree. Step 8

18 Carefully cut along the SOLID black line of the first segment at the top of the tree. Step 8

19 Fold the first segment at the top to the tree back against the card, along the dotted line, and crease with your thumb or finger. Step 9

20 Fold the first segment at the top to the tree back against the card, along the dotted line, and crease with your thumb or finger. Step 9

21 Put the first segment back in its original position. Step 10

22 Put the first segment back in its original position. Step 10

23 Step 11 Open the card like a tent, and push the first segment through to the other side.

24 Step 11 Open the card like a tent, and push the first segment through to the other side.

25 Step 12 If you turn the card over, this is what it looks like.

26 Step 12 If you turn the card over, this is what it looks like.

27 Step 13 Turn the card over again and carefully cut along the SOLID black line of the second segment at the top of the tree.

28 Step 13 Turn the card over again and carefully cut along the SOLID black line of the second segment at the top of the tree.

29 Step 14 Fold the second segment at the top to the tree back against the card, along the dotted line, and crease with your thumb or finger.

30 Step 14 Fold the second segment at the top to the tree back against the card, along the dotted line, and crease with your thumb or finger.

31 Step 15 Put the second segment back in its original position.

32 Step 15 Put the second segment back in its original position.

33 Open the card like a tent, and push the second segment through to the other side. Step 16

34 Step 17 If you turn the card over, this is what it looks like.

35 Step 17 If you turn the card over, this is what it looks like.

36 Step 18 Turn the card back over again and repeat the same process of cutting along the solid black lines, folding the segments and pushing them through to the other side. When you have done all five segments the card will look like this.

37 Step 18 Turn the card back over again and repeat the same process of cutting along the solid black lines, folding the segments and pushing them through to the other side. When you have done all five segments the card will look like this.

38 Step 19 Set the Christmas tree card aside and lay the white sheet, the backing card, on a flat surface, the long sides are horizontal to you. Take a ruler and find the middle of the paper. Draw a vertical line. Line the edge of the ruler up against that line. Score the backing card down the center with your paper clip.

39 Step 19 Set the Christmas tree card aside and lay the white sheet, the backing card, on a flat surface, the long sides are horizontal to you. Take a ruler, find the middle of the paper, and draw a vertical line. Line the edge of the ruler up against that line. Score the backing card down the center with your paper clip.

40 Fold the backing card in half with the line on the INSIDE. Set this card aside. Step 20

41 Fold the backing card in half with the line on the INSIDE. Set this card aside. Step 20

42 Step 21 Take the Evergreen Tree card and turn it over so the dotted outline is visible. Put a thin line of glue along the right side of the card from top to bottom

43 Step 21 Take the Evergreen Tree card and turn it over so the dotted outline is visible. Put a thin line of glue along the right side of the card from top to bottom

44 Step 22 Put a thin line of glue along the left side of the card from top to bottom.

45 Step 22 Put a thin line of glue along the left side of the card from top to bottom.

46 Step 23 Take the backing card, with the dotted line facing down, and carefully position it on top of the Evergreen tree card. Take your time, making sure the edges of both cards match up.

47 Step 23 Take the backing card, with the dotted line facing down, and carefully position it on top of the Evergreen tree card. Take your time, making sure the edges of both cards match up.

48 Press the cards together, flattening them completely. Step 24

49 Press the cards together, flattening them completely. Step 24

50 Step 25 Turn the card over, carefully close and open it. Your pop-up Evergreen Tree card is ready to be decorated!

51 Step 25 Turn the card over, carefully close and open it. Your pop-up Evergreen Tree card is ready to be decorated!

52 Decorate, and share with someone special!!! Visit robertsabuda.com

53


Download ppt "Pop-up Evergreen Tree. Designed by Robert Sabuda."

Similar presentations


Ads by Google