Presentation is loading. Please wait.

Presentation is loading. Please wait.

Fundamental of Optical Engineering Lecture 7.  Boundary conditions:E and T must be continuous.  Region 1:

Similar presentations


Presentation on theme: "Fundamental of Optical Engineering Lecture 7.  Boundary conditions:E and T must be continuous.  Region 1:"— Presentation transcript:

1 Fundamental of Optical Engineering Lecture 7

2

3  Boundary conditions:E and T must be continuous.  Region 1:

4  Region 2:  As we know that E is continuous.

5  Therefore,

6

7  For I ≥ I c implies “no refracted wave”. This allows light to propagate with no loss.  This result does not depend on polarization and the wave.  For I < I c I, there will be a reflected wave and the refracted  The ratio of E r or E t to E i depends on the polarization (direction of E i ).

8  Plane of incidence is defined by the propagation vector of incident wave and normal to the plane of the interface.

9  Consider 2 cases:  (i) Ei normal to plane of incidence.  This is called ‘s-polarization’ or ‘perpendicular polarization’.

10  (ii) Ei in plane of incidence.  This is called ‘p-polarization’ or ‘perpendicular polarization’.

11 12341234

12  For normal incidence

13  We can also show from #3 that

14  The angle that makes no light reflection for p-polarization.  Maximum polarization occurs at this angle for reflected light.  Light reflected at any other angle but Brewster’s is partially linearly polarized.

15  Note: There is no Brewster’s angle for s- polarization.

16  Calculate Brewster’s angle for light traveling from a medium of refractive index 1.81 into a medium of index 1.52.

17  What is the angle of incidence for complete polarization to occur on reflection at the boundary between water (n=4/3) and glass (n=1.589) assuming the light comes from (a) water and (b) glass.

18  Unpolarized light  Linearly polarized light  Partially linearly polarized light  Circular polarization  Elliptical polarization

19  Birefringent median can transform polarization.  Birefringent media have different refractive indices for orthogonal polarizations.

20  Let us consider

21  The output polarization is the same as incident one.  This is called “Full-wave”.

22  This is called “Half-wave”.

23  This is called “quarter-wave”.

24  After leaving a crystal  Consider real part of an electric field by assuming

25

26  Elliptrical polarization

27  These are components which transform polarization.


Download ppt "Fundamental of Optical Engineering Lecture 7.  Boundary conditions:E and T must be continuous.  Region 1:"

Similar presentations


Ads by Google