Presentation is loading. Please wait.

Presentation is loading. Please wait.

Molecular Diagnostic Methods Recombinant DNA Technology Recombinant DNA Technology.

Similar presentations


Presentation on theme: "Molecular Diagnostic Methods Recombinant DNA Technology Recombinant DNA Technology."— Presentation transcript:

1 Molecular Diagnostic Methods Recombinant DNA Technology Recombinant DNA Technology

2 Nucleic Acid Test for Infectious Disease Accurate to ID MO –Specific – DNA, RNA –Sensitive - detect low number Timely ID MO causing disease Rapid start proper clinical treatment in patient Guide Public Health to prevent spread of infection

3 Utility Nucleic Acid Test ID nonculturable agents: –Human papilloma virus –Hepatitis B virus ID fastidious, slow-growing agents: –Mycobacterium tuberculosis –Legionella pneumophilia ID highly infectious agents dangerous to culture: –Francisella tularensis –Brucella melitensis –Coccidioidis immitis

4 Utility Nucleic Acid Test In situ detection of MO: –Helicobacter pylori (stomach) –Toxoplasma gondii (intracellular protozoan) MO present low number: –Human immunodeficiency virus (HIV) in antibody negative patient –Cytomegalovirus (CMV) in transplant organ Differentiate antigenically MO Detect specific virus genotypes associated with human cancers (Papilloma virus 16, 18) MO in small volume specimens: –Intra-ocular fluid –Forensic sample

5 Utility Nucleic Acid Test Antiviral drug susceptibility testing: –Decide therapy to use in HIV drug- resistant strain Molecular epidemiology: –Identify point source for hospital and community-based outbreak –Predict virulence Non-viable MO: –In very labile, readily inactivated –In immune complexes Confirm positive lab culture isolate

6 Nucleic Acid Molecular Techniques Direct probe testing: –Short specific nucleic acid sequence –Better for ID than for detection –Not as sensitive as amplification methods DNA Amplification methods: –Make more copies of DNA –Improve sensitivity of nucleic acid testing –Amplification of: Target (DNA), Probe, Signal, or combinations

7 DNA Structure: Double Helix Double strand linear DNA: –5’ carbon at one end –3’ OH group at other end Two strands “opposite” orientation with respect to each other (antiparallel, complementary) Adenine base-pair with thymine (2 hydrogen bonds) Guanine base-pair with cytosine (3 hydrogen bonds)

8 DNA Helix: Hydrogen Bonds

9 Hybridization: Direct Probe Testing Hybridization – to come together through complementary base-pairing Used in ID Colony hybridization – MO colony treated to release nucleic acid, denatured to single strands Add single-stranded fluorescent labeled (ss)DNA (probe) unique to test MO Hybridization allowed to occur Unbound probe washed away, bound probe detected by presence of fluorescent label

10 Target DNA Amplification: Polymerase Chain Reaction Number of copies of target DNA increased by in vitro enzyme synthesis Use cell DNA polymerase to copy target DNA DNA polymerase cannot initiate synthesis on its own Need primer to start enzyme reaction Primer - single strand piece of DNA (or RNA) complementary to unique region of sequence copied

11 DNA Synthesis Synthesis occurs only in 5’ to 3’ direction

12 DNA Replication Semiconservative One ds parent strand copied Two ds parent:daughter strands

13 Polymerase Chain Reaction (PCR) Enzyme reaction to amplify DNA: –Two primers - one binds one strand of dsDNA, other binds other strand –Four nucleotide DNA precursors (dNTPs) –Thermostable DNA polymerase –Buffer (ions, salts) for enzyme reaction Primers (~15-20 bases) unique sequence to DNA being amplified PCR reaction has three basic steps: –1) Denaturation –2) Primer Annealing –3) Primer Extension

14 PCR Assay: 1) Denaturation Separate dsDNA into ssDNA Heating 95 0 C, 15 seconds to 1 minute The two ssDNA strands serve as templates for DNA synthesis

15 PCR Assay: 2) Primer Annealing DNA comes together through complementary base-pairing (hybridization) Primers base-pair with their complementary sequences on ssDNA template Primer concentration in excess of DNA template concentration Excess primer ensures base-pairing with complementary sequence on template DNA instead of ssDNA templates base-pairing back together

16 Primer Annealing Temperature used should ensure annealing will occur only with DNA sequences that are completely complementary. WHY? The annealing temperature depends upon length and sequence of primers The longer the primer and the more Gs and Cs in the sequence, the higher the annealing temperature. WHY? Annealing temperature range from 45-65ºC Annealing time usually 15 seconds to 1 minute

17 PCR Assay: 3) Primer Extension DNA polymerase use dNTPs to synthesize DNA complementary to template DNA Thermostable Taq DNA polymerase (isolated from Thermus aquaticus) extends annealed primers Temperature used is 72 0 C, optimum reaction temperature for Taq DNA pol The extension time is usually 15 seconds to 1 minute Why is this high temperature used? Why is a thermostable polymerase used?

18 PCR Assay The combination of denaturation, primer annealing, primer extension constitute 1 cycle in a PCR reaction Exponential increase of DNA with each cycle (2, 4, 8, 16, 32, 64, 128, etc.) PCR assay uses 25 to 30 cycles to amplify target DNA > 1 million copies Assay time ~5-6 hr.

19 PCR Product DNA Analysis DNA agarose gel electrophoresis –ID DNA molecular weight by migration in gel –Estimate size using DNA markers (100 bp ladder; 100-1500 bp) –Assay time ~1-2 hr. Real-Time PCR –ID DNA during PCR assay in closed tube –Use fluorescent reporter dye released during enzyme reaction –Thermal Cylcler with UV light to excite reporter dye and camera for detection –Assay time ~1 hr.

20 MICR 302 Lab PCR Exercise First PCR assay will amplify DNA sequence in bacterial 16S ribosomal RNA (rRNA) gene Use primers for DNA consensus sequence found in all bacteria Primers not unique to a specific bacteria, but unique to a conserved region of 16S rRNA gene of all bacteria

21 Bacterial 16S rRNA Gene: ID Unknown Bacteria Amplify portion of 16S rRNA gene of unknown bacteria DNA of all bacteria are amplified and yield DNA product using the consensus primers Sequence of the amplified DNA will be determined by Automated DNA Sequencer Identity of unknown found by searching and matching your result in the National Institutes of Health (NIH) DNA sequence database using “ BLAST ” program

22 MICR 302 Lab PCR Exercise Second PCR assay will amplify DNA sequence in Shiga Toxin gene Use two primer sets unique for the two different Shiga toxin genes of EHEC Only E. coli that carry one or both of these toxin genes yield DNA product using these primers Positive DNA product thus identifies bacteria isolate as EHEC strain For lab diagnosis, only this second type of PCR assay is of practical use for MO ID

23 Advantages of Molecular DNA Test High sensitivity - theoretically detect single MO High specificity – one MO species –Detect specific genotypes –Determine drug resistance –Predict virulence Speed - more rapid than traditional MO culture Simplicity - assays are automated; Real- time PCR

24 Disadvantages of Molecular DNA Test Expensive Very specific, must have good clinical data to support infection by MO before testing initiated Contaminating DNA give false positive Miss new MO unless sequencing is done (as for your lab molecular unknown); not practical in clinical lab Problem with mixed cultures – assay for all MOs possibly causing infection Too sensitive? Are results clinically relevant? No isolated MO grown in culture

25 DNA Sequencing Determine actual DNA sequence of MO Using computer, based on nucleic acid data: –Identify MO –Predict protein sequence and function The most commonly used sequencing method is the dideoxy method

26 Dideoxy DNA Sequencing Use dideoxynucleotide triphosphates (ddNTPs) H on 3’ carbon of the ribose sugar instead of OH normally found in deoxynucleotide triphosphates (dNTPs) ddNTP is chain terminator - DNA synthesis stops as 3’OH necessary for addition of next nucleotide

27 Dideoxy DNA Sequencing Template DNA to be sequenced mixed with primer, four normal dNTPs (one radioactively labeled) Mixture split into four tubes labeled A, C, G,T Each tube “spiked” with different ddNTP (ddGTP tube 1, ddATP tube 2, ddCTP tube 3, ddTTP tube 4) Add DNA polymerase, synthesis of new complementary strand Occasionally ddNTP added instead of normal dNTP, synthesis of strand terminated

28 Dideoxy DNA Sequencing In ddATP tube, newly synthesized DNA will get ddATP in each place there is T Thus, set of DNA strands in tube A, each of which ends in A Similar reaction occurs in other tubes, result in DNA that ends in C, G,T respectively After DNA synthesis, products of four tubes loaded onto four lanes of polyacrylamide gel DNA strands separated by size Sequencing gel able to resolve DNA that differ in size by only one base

29 Dideoxy DNA Sequencing After electrophoresis to separate by size, DNA strands visualized by exposing gel to X-ray film (one nucleotide was radioactive): –Strands in lane A all end in A –Strands in lane C all end in C –Strands in lane G all end in G –Strands in lane T all end in T The sequence of the DNA read from the gel by starting at bottom and reading upward

30 Automated DNA Sequencing All four ddNTP reactions done in single tube Each ddNTP labeled with a different fluorescent dye Dye present in each synthesized strand corresponds to ddNTP that terminate DNA synthesis DNA strands in reaction tube analyzed by gel electrophoresis The Sequencing reaction depends on quality and purity of the amplified DNA product

31 Automated DNA Sequencing Flourimeter and computer attach to gel Detect, record dye attached to DNA strands as run off bottom of gel DNA sequence identified by order of dyes coming off gel

32 MICR 302 Lab Molecular Unknown Culture of an isolated Unknown bacteria Isolate and purify DNA from Unknown bacteria Use PCR to amplify rRNA gene sequence of Unknown bacteria DNA Do Automated Sequencing reaction on amplified rRNA DNA product using fluorescent dyes Submit DNA to CSULA Sequencing Lab Use NIH DNA databank to search for matching DNA sequence to ID Unknown

33 Class Assignment Textbook Reading: Chapter 11 Applications of Molecular Diagnostics –Introduction to Nucleic Acid Amplification Procedures –Polymerase Chain reaction –Omit: Other Nucleic Acid Amplification Reactions Key Terms – only from assigned reading Omit: Learning Assessment Questions

34 Identifying Fecal Unknown Gram Stain, Catalase, Oxidase MOTSILIA Escherichia:A/AK/K Shigella:K/AK/A Enterobacter:A/AK/K Klebsiella:A/AK/K Salmonella:K/A, H 2 SK/K, H 2 S Citrobacter:K/A, H 2 SK/A, H 2 S Proteus:K/A, H 2 SR/A, H 2 S Yersinia:K/AK/A CIN Aeromonas:K/AK/K CIN, Oxidase(+)

35 Lecture Exam II Tue., Feb. 28, 2012 Vibrio thru New Molecular Methods Lecture, Reading, Key Terms, Learning Assessment Questions Case Study 4, 5, 6 (Pseudomonas, Francisella, Bacillus) Review, Review, Review! Repetition is the key to retention

36 Case Study Reports (Revised Due Date) March 1 - CS #7 Mycobacterium March 6 – CS #8 Clostridium March 8 – CS #9 Chlamydia March 13 – CS #10 Legionella


Download ppt "Molecular Diagnostic Methods Recombinant DNA Technology Recombinant DNA Technology."

Similar presentations


Ads by Google