1. Linux Introduction Part 2

2. Finding Files find “start directory” -name "filename“ Find the file called "filename" on the filesystem starting the search from the “start directory ” locate filename Find the file name which contains the string "filename". Easier and faster. which executable_name Show me the full path to the executable that would run if I just typed its name on the command line. whereis command Print the locations for the binary, source, and manual page files of the command "command". grep -r ‘text_to_find'. |more Search all files in the current directory and all its subdirectories (the option "-r" stands for "recursive") for the example string "text_to_find ". Print the filename and the line in the file that contains the searched string.

3. Installing Packages: RedHat binary package (*.rpm) rpm packages located in the RPMS directory on the installation CD To read the info on uninstalled package rpm -qpi package_name-version.platform.rpm q: query (must be first), p: uninstalled package, i: display info To install the package rpm -ihv package_name-version.platform.rpm i: install (must be first), h: display "hashes" to show the unpacking progress, v: verbose

4. Installing Packages: RedHat binary package (*.rpm) Finding files of installed package rpm -ql package_name-version.platform.rpm Upgrading package rpm -Uvh my_new_file.rpm Installing and ignoring dependencies rpm -ivh --nodeps package_name-version.platform.rpm rmp -ivh --nodeps --force package_name-version.platform.rpm rpm -e package_name Uninstall (option "e"=erase) the package package_name. No "-version.platform.rpm" at the end of the package name rpm -qf a_file Find the name of the installed package to which the file "a_file" belongs or belonged.

5. Installing Packages: Source-code Tarball Linux source code downloaded in the form of a compressed tarball (*.tar.gz or *.tgz) Installation steps are usually as follows: First, change the current working directory to /usr/local : cd /usr/local Second, I decompress the tarball that I downloaded from the net: tar -xvzf /home/the_tarball_dir/my_tarball.tar.gz The contents of the tarball are extracted into a subdirectory which tar creates under my current working directory (/usr/local) If the tarball is not compressed (e.g., *.tar), use: tar -xvf /home/the_tarball_dir/my_tarball.tar

6. Installing Packages: Source-code Tarball Third, go to the new directory dir cd the_new_program_subdir Fourth, most programs are compiled by executing these three commands:./configure make make install Fifth, find the new executable which were just compiled. The names of executables display in green when running this command: ls --color Run the executable, for example:./the_executable Some programs automatically install the executable to /usr/local/bin /usr/local/bin/the_executable

7. Some administration commands su (=substitute user id) Assume the superuser (=root) identity. Type exit to return. printtool (as root in X-terminal) Configuration tool for your printer(s). Settings go to the file /etc/printcap and /var/spool/lpd. linuxconf (as root, either in text mode or in the X terminal). You can access and change hundreds of network setting from here. kudzu (as root). Automatically determines and configures hardware. lsdev Display info about your hardware (DMA, IRQ, IO ports).

8. Some administration commands lsmod (= list modules). List currently loaded kernel modules. A module is like a device driver. modprobe -l |more List all the modules available for your kernel. insmod (as root) Insert modules into the kernel insmod module_name chkconfig --list | more To check the current status of services To start a service service wu-ftpd start OR /etc/init.d/wu-ftpd start

9. Some administration commands ps (="print status" or "process status") List the processes currently run by the current user. ps axu | more List all the processes currently running, even those without the controlling terminal, together with the name of the user that owns each process. top Keep listing the currently running processes on my computer, sorted by cpu usage (top processes first). Press c when done. PID = process identification. USER=name of the user who owns (started?) the process. PRI=priority of the process (the higher the number, the lower the priority, normal 0, highest priority is -20, lowest 20. SIZE=kilobytes of code+data+stack taken by the process in memory. RSS=kilobytes of physical (silicon) memory taken. SHARE=kilobytes of memory shared with other processes. STAT=state of the process: S-sleeping, R-running, T-stopped or traced, D-uniterruptable sleep, Z=zombie. %CPU=share of the CPU usage (since last screen update). %MEM=share of physical memory. TIME=total CPU time used by the process (since it was started). COMMAND=command line used to start the task (careful with passwords, etc., on command line, all permitted to run "top" may see them!

10. Some administration commands Display files (cat command) in the /proc directory to display some system info /proc/cpuinfo --information about the processor, such as its type, make, model, and performance. /proc/meminfo --how much memory Linux uses (or use the free command) /proc/devices --list of device drivers configured into the currently running kernel. /proc/dma --DMA channels being used at the moment. /proc/filesystems --filesystem types configured into the kernel. /proc/interrupts --interrupts in use, and how many of each there have been. /proc/ioports --I/O ports in use at the moment.

11. Process control any_command & Run any command in the background. The job_number is printed on the screen jobs List my background or stopped processes and show their job numbers. batch at>any_command d Run any command (when the system load is low. The process will keep running after logout. When the command completes, an email will be sent to the user with the output at time Execute a command at a specified time (say 17:00). You will be prompted for the command(s) to run, until you press d. atq (display the queue of processes started with at) atrm (remove a process from the "at queue"). watch -n 60 any_command Execute any_command repeatedly at 60-second intervals kill PID Force a process whose Process ID is PID to shutdown.