We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byArianna McGuire
Modified over 3 years ago
Sectional Views Copyright © 2003 Glencoe/McGraw-Hill
Sectional Views Copyright © 2003 Glencoe/McGraw-Hill
Cutting-Plane Lines ALL SIZES ARE ESTIMATED, NOT MEASURED. Copyright © 2003 Glencoe/McGraw-Hill
Full Section Bracket Copyright © 2003 Glencoe/McGraw-Hill
Full Section Bracket with Cutting Plane Copyright © 2003 Glencoe/McGraw-Hill
Full Section Front of Bracket Moved Away to Expose Front Surface Copyright © 2003 Glencoe/McGraw-Hill
Full Section (Multiview Drawing) Copyright © 2003 Glencoe/McGraw-Hill
Full Section Copyright © 2003 Glencoe/McGraw-Hill
Half Section Packing Gland with Cutting Plane Copyright © 2003 Glencoe/McGraw-Hill
Half Section Packing Gland Copyright © 2003 Glencoe/McGraw-Hill
Half Section Front of Packing Gland Moved Away to Expose Front Surface Copyright © 2003 Glencoe/McGraw-Hill
Half Section (Multiview Drawing) Copyright © 2003 Glencoe/McGraw-Hill
Half Section Copyright © 2003 Glencoe/McGraw-Hill
Offset Section Bearing Flange Copyright © 2003 Glencoe/McGraw-Hill
Offset Section Bearing Flange with Cutting Plane Copyright © 2003 Glencoe/McGraw-Hill
Offset Section Front of Bearing Flange Moved Away to Expose Front Surface Copyright © 2003 Glencoe/McGraw-Hill
Offset Section (Multiview Drawing) Copyright © 2003 Glencoe/McGraw-Hill
Offset Section Copyright © 2003 Glencoe/McGraw-Hill
Broken-Out Section Double Packing Gland Copyright © 2003 Glencoe/McGraw-Hill
Broken-Out Section Double Packing Gland with Cutting Plane Copyright © 2003 Glencoe/McGraw-Hill
Broken-Out Section Front of Double Packing Gland Moved Away to Expose Cut Surface Copyright © 2003 Glencoe/McGraw-Hill
Broken-Out Section (Multiview Drawing) Copyright © 2003 Glencoe/McGraw-Hill
Broken-Out Section Copyright © 2003 Glencoe/McGraw-Hill
Revolved Section Most Common Method Copyright © 2003 Glencoe/McGraw-Hill
Other Acceptable Methods Revolved Section Copyright © 2003 Glencoe/McGraw-Hill
Removed Sections Section A-A Copyright © 2003 Glencoe/McGraw-Hill
Removed Sections Section B-B Copyright © 2003 Glencoe/McGraw-Hill
Removed Sections Section C-C Copyright © 2003 Glencoe/McGraw-Hill
Removed Sections Section D-D Copyright © 2003 Glencoe/McGraw-Hill
Removed Sections Section E-E Copyright © 2003 Glencoe/McGraw-Hill
Break Symbol for Cylinders Copyright © 2003 Glencoe/McGraw-Hill
Break Symbol for Pipes Copyright © 2003 Glencoe/McGraw-Hill
Ch.8 Section Views Section views and sectional drawings (8.1) Visualization of section views (8.1.2) Cutting plane lines and their placement (8.2 & 8.2.1)
Orthographic Projection Sectional Views. Section Views When a part has a lot of interior details, hidden lines can make the part hard to understand.
EML 2023 – Modeling, Drawings Lecture Auxiliary and Section Views.
TECH 104 – Technical Graphics Communication Week 6: Section Views.
Introduction to Engineering Section Views - 1 Agenda Why section views are needed Types of section views Reference Bertoline, Chapter 3, Sections
Auxiliary and Section Views. EML 2023 Computer Aided Design auxiliary views A surface that appears as inclined in a principal view can be shown in true.
Copyright 2007 McGraw-Hill Australia Pty Ltd PPTs t/a Engineering Drawing 7e by Boundy 3-1 Chapter 3 Drawing Representation: Sectioning, welding and.
6 Section Views Permission granted to reproduce for educational use only. Explain the characteristics of a drawing that features a full section view.
Ken YoussefiMechanical and Aerospace Engineering Dept., SJSU 1 Section Views Orthographic views showing all hidden lines may not be clear enough to describe.
CE En 112 Engineering Drawing with CAD Application Chapter 3: Section and Auxiliary Views (Lecture A) Section Views.
An Introduction to Section Views © 2012 Project Lead The Way, Inc.Introduction to Engineering Design.
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Chapter 16 Section Views.
SECTION DRAWINGS. A section drawing shows detail on the inside of an object by cutting away part of the object.
Alternate Views. In some cases, orthogonal projections and pictorials are not sufficient to specify all the details of a part. –Section View. Used to.
Types of Sectional Views Half Full Offset Half Section In a half section, one quarter of the part is cut away. The cutting plane line goes.
Section Views. Used to describe interior details of a part that cannot be seen in an orthographic view Eliminates the need to dimension hidden lines.
Sectional Views Chapter 6. 2 Technical Drawing 13 th Edition Giesecke, Mitchell, Spencer, Hill Dygdon, Novak, Lockhart © 2009 Pearson Education, Upper.
Sectional Views. 2 Technical Drawing 13 th Edition Giesecke, Mitchell, Spencer, Hill Dygdon, Novak, Lockhart © 2009 Pearson Education, Upper Saddle River,
SECTION VIEW QUIZ Write your name on your paper!
Sketching Assignment ENGR_SEG_2 Leon Grant. Notice In this section it is important for students to be able to visualize the part sectioned. Students could.
GE 121 – Engineering Design Engineering Design GE121 SECTION VIEWS Drawing and Sketching (Continued) Lecture 13B.
Chapter 8 Section Views. TOPICS Introduction Terminology & common practices Kind of sections Dimensioning.
Section Views In this tent you will learn a basic understanding on how full section views and offset section views work.
Chapter 13 Section Views. Objectives Use cutaway, or section, views as a method for showing the features of a part that are normally hidden when presented.
Graphical Language Basic Lines and Projections Scales Cross-Sectional Views and Sections.
ENGR-22_Lec-12_Section-Views-2.ppt 1 Bruce Mayer, PE Engineering 22 – Engineering Design Graphics Bruce Mayer, PE Registered Electrical.
SECTIONAL VIEWS. Types of Sectional Views Half Full Offset.
Drawing Section Views. What is a “Section View” ? A section view is a view used on a drawing to show an area or hidden part of an object by cutting away.
Sectional Views Engineering Graphics & Design By John Kirby.
Introduction to Engineering Introduction to Isometric Ellipse Agenda: Sketching of ellipse for isometric drawings Introduce concepts and conventions of.
Transversal lines & Mrs. Mac’s Class. This presentation was created following the Fair Use Guidelines for Educational Multimedia. Certain materials.
ENGR Sectioned Views Thursday, October 28 th 2004.
Engineering H191 - Drafting / CAD Gateway Engineering Education Coalition Lect 13P. 1Autumn Quarter Section Views Lecture 13.
Can you guess what is inside of this box? How can a Designer show on a drawing what is hidden from view? If you had the Invisible Women’s powers you could.
Engineering H191 - Drafting / CAD Gateway Engineering Education Coalition Lect 10P. 1Autumn Quarter Section Views Lecture 10.
By: Mr. Lua 09/09/2013 Mechanical Drawings. Multi- View Drawings What is Multi-View Drawings? More than one view is needed to give an accurate shape and.
C H A P T E R S I X 2D DRAWING REPRESENTATION. 2 Technical Drawing with Engineering Graphics, 14/e Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman.
Leon R. Grant III Hiram High School. In this lesson we will learn to Identify and sketch various types of section views. Full & half sections Removed.
Chapter 14 Axonometric Projection (Pictorial Drawing)
TECH 104 – Technical Graphics Communication Week 7: Dimensioning.
1 PTT 105: Engineering Graphics. 2 Cutting PlaneSection Lines Several Types of Section Drawings.
Sectional Views Section Views. Often there is a need to show interiors that cannot be illustrated clearly by hidden lines. Interiors are shown by slicing.
AutoCAD 2D_I Module 6: Sectional Views. Module Objectives 1.Differentiate the different types of sectional views. 2.Create sectional views drawing from.
Introduction to Technical Drawing Adapted from Project Lead the Way, Principles of Engineering.
SECTIONING OF A MACHINE COMPONENT BY ANY ONE SECTION PLA NE,OUT OF THREE FOLLOWING MENTIONED SECTION PLANES.
1 SheetCourse: Engineering Graphics 1504Memorial University of Newfoundland Engi 1504 – Graphics Lecture 5: Sectioning and Dimensioning l Sectioning an.
Forging new generations of engineers. Engineering Drawing Types.
© 2017 SlidePlayer.com Inc. All rights reserved.