3. 10-1 Circles  I. Definitions  Circle The set of all points in a plane that are at a given distance from a given point in that plane. Symbol ○R  Radius The distance between the center of a circle and any point on the edge of the circle. AR,BR  Diameter The distance across the circle that goes through the radius AB  Chord A segment that goes from one side of a circle to another. AC  Circumference the distance around the circle C= 2  r  Total degrees 360 A C R B

4. II. EXAMPLES 1. Find the circumference if  a. r = 8b. d = 12

5. 2. Find d and r if C = 136.9 cm.

6. 3. Circle A radius=8, Circle B radius = 14, and JE =4. Find EB and DC. D A J EB C

7. 10-2 Angles and Arcs I. Central Angle an angle whose vertex contains the center of a circle.

9. Part of a circle; the curve between two points on a circle. II. Arc

10. If circle is divided into two unequal parts or arcs, the shorter arc (in red) is called the minor arc and the longer arc (in blue) is called the major arc. A B C Minor arc- 2 letters Major arc- 3 letters

12. III. Semicircle –a semicircle is an arc that makes up half of a circle 180°

14. Arc Addition Postulate - The measures of an arc formed by two adjacent arcs is the sum of the measures of the two arcs. That is, if B is a point on, then + =.

15. The measure of a minor arc = central angle. The measure of a major arc = 360 minus the measure of its central angle. IV. ARC MEASURE

16. V. ARC LENGTH LENGTH OF THE ARC is a part of the circumference proportional to the measure of the central angle when compared to the entire circle

17. VII. CONCENTRIC CIRCLES CONCENTRIC CIRCLES lie in the same plane and have the same center, but have different radii. ALL CONCENTRIC CIRCLES ARE SIMILAR BC ALL CIRCLES ARE SIMILAR!

18. VIII. CONGRUENT ARCS TWO ARCS WITH THE SAME MEASURE AND LENGTH

19. Example 1: Find the length of arc RT and the measurement in degrees.

20. 2.a. Find the length of arcs RT and RST b. Find the measurement in degrees of both.

21. 3. Find the arc length of RT and the degrees measurement of RT.

22. 4.If <NGE  < EGT, <AGJ =2x, <JGT = x + 12, and AT and JN are diameters, find the following: a. xb. m NEc. m JNE A J T N E

23. 5.

24. 6. Find x. R O A Q M N 9x 8x 19x

25. 10-3 Arcs and Chords I. Arc of the chord When a minor arc and a chord share the same endpoints, we called the arc the ARC OF THE CHORD.

26. II. Relationships – 2 minor arcs are  if their chords are .

27. If a diameter is perpendicular to a chord, it bisects the chord and the arc.

28. 2 chords are  if they are equidistant from the center

29. Inscribed polygons must have vertices on the circle.

30. 1. Circle N has a radius of 36.5 cm. Radius is perpendicular to chord FG, which is 53 cm long. a.If m FG= 85, find m HG. b.Find NZ.

31. 2. Chords FG and LY are equidistant from the center. If the radius of M is 32, find FG and BY. FG = 46.4 LY = 23.2

32. 3. mWX = 30, mXY = 50, mYZ = 30. WY= 14, FIND XZ.

33. 4. RT is a diameter. If US = 9, find SV.

34. 5.XZ= 12, UV = 8, WY is a diameter. Find the length of a radius.

35. 6. IF AB and DC are both parallel and congruent and MP = 7, find PQ.

36. 10-4 Inscribed Angles I. Definitions Inscribed angle — An angle that has its vertex on the circle and its sides are chords of the circle Intercepted arc — An intercepted arc is the arc that lies "inside" of an inscribed angle

37. If an angle is inscribed in a circle, then the measure of the angle equals one-half the measure of its intercepted arc

38. If two inscribed angles of a circle or congruent circles intercept congruent arcs or the same arc, then the angles are congruent

39. If an inscribed angle of a circle intercepts a semicircle, then the angle is a right angle

40. If a quadrilateral is inscribed in a circle, then its opposite angles are supplementary

41. 1.

42. 2.

43. 3. If mLM=120, mMN=45, and mNQ=105, find the numbered angles. < 1= 22.5 < 2 = 60 < 3 = 45 < 4 = 22.5 < 5 = 112.5

44. 4. If <2= 3a + 2 and < 3= 12 a – 2, find the measures of the numbered angles m  1 = 45, m  4 = 45 <2 = 20, < 3= 70

45. 5. If m  W = 74 and m  Z = 112, find m  Y and m  X. 68= m  X 106= m  Y

46. 10-5 Tangents I. A line is TANGENT to a circle if it intersects the circle in EXACTLY ONE point. This point is called the POINT OF TANGENCY.

47. If a line is tangent to a circle, then it is perpendicular to the radius drawn to the point of tangency.

48. II. Common External Tangents & Common Internal Tangents A line or line segment that is tangent to two circles in the same plane is called a common tangent COMMON EXTERIOR

49. COMMON INTERIOR

50. If two segments from the same exterior point are tangent to the circle, then they are congruent

51. Examples 1. AZ is tangent to O at point Z. Find x. x 17.5 14

52. 2. Determine whether BC is tangent to A. 16.5 10 22

53. 3. Determine whether is tangent to H. 12 24 18

54. 4. Solve for x. 35 – 2 x 3 x - 5

55. 5. Triangle SCW is circumscribed about A. Find the perimeter of  SCW if WT = 0.5(BC). 26 15

56. 6. Find x so that the segment is a tangent. 8 x

57. 10-6 Secants and Tangents A SECANT is a line that intersects a circle in exactly two points. Every secant forms a chord A secant that goes through the center of the circle forms a diameter.

58. If a secant and a tangent intersect at the point of tangency, then the measure of each angle formed is one- half the measure of its intercepted arc

59. If two secants intersect in the interior of a circle, then the measure of an angle formed is one-half the sum of the measures of the arcs intercepted by the angle and its vertical angle.

60. If two secants, a secant and a tangent, or two tangents intersect in the exterior of a circle, then the measure of the angle formed is one- half the positive difference of the measures of the intercepted arcs.

61. ( - ) / 2 = BVA (Big Arc - Little Arc) divided by 2

62. ( - ) / 2 = BVA (Big Arc - Little Arc) divided by 2

65. 5. 6.

66. 7. 8.

67. 9.10. 11.

68. 12. 11.

69. 13. 14.

70. 10-7 Special Segments I. Chords If two chords intersect in a circle, then the products of the measures of the segments of the chords are equal (AO)(DO) = (BO)(CO).

71. If two secant segments are drawn to a circle from an exterior point, then the product of the measures of one secant segment and its external secant segment is equal to the product of the measures of the other secant segment and its external secant segment. (EA)(EC) = (EB)(ED)

72. If a tangent segment and a secant segment are drawn to a circle from an exterior point, then the square of the measures of the tangent segment is equal to the product of the measures of secant segment and its external secant segment (DC) 2 = (DB)(DA)

73. 1. 2. EXAMPLES: SOLVE.

74. 3. 4 2x X+ 3

75. 4. 5.

76. 6. 7.

77. 8. 9.

78. 10.11.

79. 12. 13.

80. 10-8 Equations of Circles

81. I. Graph of a circle You can graph a circle if you know: Its center point (h,k) Its radius or diameter

82. II. The equation (x - h) 2 + (y - k) 2 = r 2 –Where (h,k) is your center point –And r is the radius –Ex: (x - 3) 2 + (y - 2) 2 = 4 2 or (x - 3) 2 + (y - 2) 2 = 16 –So center is (3,2) and radius=4

83. Your turn Ex 1: name the center and the radius for: (x - 1) 2 + (y -3) 2 = 25

84. Answer: Center (1,3) Radius 5 ( why? b/c 5 2 = 25 )

85. So, how do u write the equation? Center ( -1, 2) radius = 7 remember : (x - h) 2 + (y - k) 2 = r 2 –So (x - -1) 2 + (y - 2) 2 = 7 2 – (x +1) 2 + (y - 2) 2 = 49

86. Your turn Write the equation of a circle with center (-5,-3) and diameter 16.

87. Answer (x +5) 2 + (y +3) 2 = 64

88. III. What if u are just given some points? Find an equation of the circle that has a diameter with endpoints at (6, 10) and (-2, 4). Step 1: Use the distance formula to find how long the diameter is: √(-2-6) 2 + (4-10) 2 = √100= 10 so radius is 5 Or just graph it an count how long it is!

89. Step 2: Graph it so you can see the center, or find the half way point like this: –Take the x’s: 6+ -2 = 4 divide by 2=2 –The y’s : 10+4= 14 then divide by 2 = 7 –Center (2,7)

90. Finally! Write the equation: (x -2) 2 + (y -7) 2 = 25