1. Office of Traffic, Safety, and Operations Sample Plan Set Signing Plan Design (At-Grade) June 20, 2012

2. Office of Traffic, Safety, and Operations 2 Signing Plan Assembly Steps 1.Eliminate levels of detail (buildings, lot lines, etc) on roadway plan sheets. REASON: So placement of signs on roadway sheets are not cluttered by underlying details.

3. Office of Traffic, Safety, and Operations 3 Signing Plan Assembly Steps 1.Eliminate levels of detail (buildings, lot lines, etc) on roadway plan sheets. REASON: So placement of signs on roadway sheets are not cluttered by underlying details.

4. Office of Traffic, Safety, and Operations 4 Signing Plan Assembly Steps 2.Organize roadway plan sheets: all mainline roadway comes first with stationing generally increasing from left to right (include roadway through interchanges for depicting mainline signing through interchange; next are interchange/intersection layouts for indicating signing on cross streets and at ramp terminals. REASON: Consistency in design.

5. Office of Traffic, Safety, and Operations 5 Signing Plan Assembly Steps 3.Place signs on roadway plan sheets for each direction of travel, as the signs would appear to a motorist (placement and spacing of signs are detailed in the MN MUTCD and the TEM, Chapter 6).

6. Office of Traffic, Safety, and Operations 6 Signing Plan Assembly Steps 4.Label each type of sign (Types A, C, D, EO and EA) with the following numbering system:

7. Office of Traffic, Safety, and Operations 7 Signing Plan Assembly Steps A.All signs are assigned a label, whether they are new, existing being removed, or existing being salvaged. All New Signs are labeled with their Type and a number sequentially starting at 1, Existing Signs to be Removed start numbering with 101 and Existing Signs to be Salvaged start numbering with 201 (e.g. the first new Type A sign would be A-1, the first new Type D sign would be D-1, the first existing Type EA sign to be removed would be EA-101, and so forth for all types of signs).

8. Office of Traffic, Safety, and Operations 8 Signing Plan Assembly Steps B.Begin numbering on the left edge of the first roadway sheet and progressing through the last roadway sheet. Start with the number 1" and increase numbering to the end of the roadway sheets.

9. Office of Traffic, Safety, and Operations 9 Signing Plan Assembly Steps C.All completely identical Type C, D, and E (EA & EO) signs receive the same label throughout the plan. However, the signs must be identical in every aspect except location. The factors that are considered unique include the installation and mounting requirements, size, and legend. REASON: The uniqueness of each sign is bid differently by signing contractors.

10. Office of Traffic, Safety, and Operations 10 Signing Plan Assembly Steps D.Type OH signs -each of these signs has a unique number assigned – contact the OTST Signing Unit to obtain OH sign numbers (Rick Sunstrom at 651-234-7381).

11. Office of Traffic, Safety, and Operations 11 Signing Plan Assembly Steps 5.Place exit ramp/exit loop delineation note behind the exit nose of each exit ramp/exit loop [this note refers to a standard sheet (which depicts the appropriate markers and delineation) included elsewhere in the complete signing plan]. REASON: Delineation and markers for freeway ramps and loops is standardized and only the reference to the standard is needed on each appropriate roadway sheet.

12. Office of Traffic, Safety, and Operations 12 Signing Plan Assembly Steps 6.Show appropriate delineation and markers (refer to MnDOT Traffic Engineering Manual, Chapter 7 for the various types, and application, of delineators and markers; detailed drawings are contained in the MnDOT Standard Signs Manual).

13. Office of Traffic, Safety, and Operations 13 Signing Plan Assembly Steps 7.Utilities: Compile a list of the utility companies within the project limits for inclusion in the plan. If signing plan includes ANY signs with concrete or H- Pile (Type A signs have H-pile footings) footings, then ALL utilities need to be shown and labeled on each roadway sheet within close proximity of each concrete or H-Pile footing.

14. Office of Traffic, Safety, and Operations 14 Signing Plan Assembly Steps 8.Design all guide sign panels (using the latest version of SignCAD®). Refer to the MnDOT Traffic Guide Sign Design Manual for standards, policies and procedures. Guide sign design questions, contact Rick Sunstrom at 651-234-7381. REASON: consistency in design of sign panels in conformance with Federal and State sign design standards.

15. Office of Traffic, Safety, and Operations 15 Signing Plan Assembly Steps 9.Select and verify, or coordinate, locations (engineering stations) of all Type A and/or Type OH signs with MnDOT OTST Signing Unit (Heather Lott at 651-234-7371 or Rick Sunstrom at 651-234-7381). REASON: Signs need to be spaced properly and installed at proper locations for motorists safety and guidance.

16. Office of Traffic, Safety, and Operations 16 Signing Plan Assembly Steps 10.Obtain a cross section (from design if new roadway design OR from survey crew if in place roadway) for each new Type A and Type OH sign. Plot all cross sections in Microstation and add the Type A or Type OH sign structure and sign panel(s) in accordance with the format of the cross sections in the back of the Sample Signing Plan. REASON: consistency in design for bidding purposes for contractors.

17. Office of Traffic, Safety, and Operations 17 Signing Plan Assembly Steps 11.List all appropriate notes that apply on each roadway sheet for all of the various types of work listed below each sign. Refer to the master list of notes in the Sample Signing Plan.

18. Office of Traffic, Safety, and Operations 18 Signing Plan Assembly Steps 12.Create the appropriate data boxes (using Excel) for each sign type and type of work being done on the sign (i.e. Salvage Signs Type C are tabulated in one data box, Remove Signs Type C are tabulated in another data box, etc.). The type of work for each type of sign is already broken down on the notes on each roadway sheet. Refer to the Sample Signing Plan to determine which data boxes need to be created for each type of sign. Then FILL IN the data boxes with the appropriate data. REASON: The listing of estimated pay quantities are derived from the totals of each of the data boxes

19. Office of Traffic, Safety, and Operations 19 Signing Plan Assembly Steps 13.Prepare list of standard plates applicable to project. 14.Prepare list of estimated quantities using the total quantity from each of the data boxes. 15.Assemble all necessary structural and detail sheets. 16.Complete the title sheet (if signing project is NOT tied to a construction project).

20. Office of Traffic, Safety, and Operations 20 Signing Plan Assembly Steps 17.Assemble ALL of the plan sheets in the proper order (in accordance with the Sample Signing Plan). 18.Number the roadway sheets sequentially beginning with the Title Sheet as Sheet 1 19.Fill in, and check, all sheet cross referencing throughout the plan.

21. Office of Traffic, Safety, and Operations 21 Plan Sheets Title sheet. Estimate of quantities. Sign data sheets giving pertinent information for each sign. Public utilities Roadway plan sheets showing signing for mainline and interchanges. Sign panel drawings for all non-standard signs. Standard details. Structural details. Refer to Sample Plan Handout

22. Office of Traffic, Safety, and Operations Index Map 22 Title Sheet Title

23. Office of Traffic, Safety, and Operations 23 Title Sheet Index Map

24. Office of Traffic, Safety, and Operations 24 Title Sheet Index Map Begin/End Stations

25. Office of Traffic, Safety, and Operations 25 Title Sheet Index Map Plan & Map Scales

26. Office of Traffic, Safety, and Operations 26 Title Sheet Index Map Plan Revisions Table

27. Office of Traffic, Safety, and Operations 27 Title Sheet Index Map Project Numbers

28. Office of Traffic, Safety, and Operations 28 Title Sheet Index Map Governing Specs

29. Office of Traffic, Safety, and Operations 29 Title Sheet Index Map Plan Approvals/Certification

30. Office of Traffic, Safety, and Operations 30 Estimated Quantities For list of items, see Spec Book List of Pay Items

31. Office of Traffic, Safety, and Operations 31 Estimated Quantities

32. Office of Traffic, Safety, and Operations 32 Type C Sign Data Sheet Chart A Chart A for signs to be furnished and installed List of Pay Items

33. Office of Traffic, Safety, and Operations 33 Type C Sign Data Sheet Chart A Order in accordance with the Standard Signs Summary – Regulatory – Warning – Route Markers & Auxiliaries Sign Number

34. Office of Traffic, Safety, and Operations 34 Type C Sign Data Sheet Chart A Order Quantity

35. Office of Traffic, Safety, and Operations 35 Type C Sign Data Sheet Chart A Number of Posts, Type, and Knee Brace Quantity – TEM Charts 6.2, 6.3 Length – See Appendix C – Post Length Determination Sheet Posts

36. Office of Traffic, Safety, and Operations 36 Type C Sign Data Sheet Chart A Mounting Height

37. Office of Traffic, Safety, and Operations 37 Type C Sign Data Sheet Chart A Panel Summary Size specified in the Standard Signs Summary STOP signs specified in TEM 6-5.12

38. Office of Traffic, Safety, and Operations 38 Type C Sign Data Sheet Chart A Code Number, Panel Legend

39. Office of Traffic, Safety, and Operations 39 Type C Sign Data Sheet Chart A Specific Notes

40. Office of Traffic, Safety, and Operations 40 Type C Sign Data Sheet Chart A General Notes

41. Office of Traffic, Safety, and Operations 41 Type C Sign Data Sheet Chart B Same information as Chart A, however, –Chart B is for Signs to be salvaged and installed

42. Office of Traffic, Safety, and Operations 42

43. Office of Traffic, Safety, and Operations 43

44. Office of Traffic, Safety, and Operations 44 Type C Sign Data Sheet Charts C Post Spacing – Punch Codes in Standard Signs Manual or – TEM Chart 6.4 – Panel Legend (graphic) – Details on later sheet

45. Office of Traffic, Safety, and Operations 45 Type D Sign Data Sheet Chart D Same as Charts for Type C signs, except – Post Spacing – Punch Codes in Standard Signs Manual or – TEM Chart 6.4 – Panel Legend (graphic) – Details on later sheet

46. Office of Traffic, Safety, and Operations 46

47. Office of Traffic, Safety, and Operations 47 Chart E

48. Office of Traffic, Safety, and Operations 48 Chart F

49. Office of Traffic, Safety, and Operations 49 Type D Sign Data Sheet Chart G - Markers

50. Office of Traffic, Safety, and Operations 50

51. Office of Traffic, Safety, and Operations 51 Utilities

52. Office of Traffic, Safety, and Operations 52 Utilities Affect on Utilities

53. Office of Traffic, Safety, and Operations 53 Utilities Subsurface Utility Info

54. Office of Traffic, Safety, and Operations 54 Utilities List of Utilities

55. Office of Traffic, Safety, and Operations 55 Roadway Layout Stationing

56. Office of Traffic, Safety, and Operations 56 Roadway Layout Sign Numbers

57. Office of Traffic, Safety, and Operations 57 Roadway Layout Sign Locations

58. Office of Traffic, Safety, and Operations 58 Roadway Layout Notes

59. Office of Traffic, Safety, and Operations 59 Type D Sign Panels – SignCAD software used to design panels – Sign panel dimensioning – See Standard Signs Manual for arrow, fraction and overlay details. – Guide Sign Design Course offered Fall 2008?

60. Office of Traffic, Safety, and Operations 60 Sign Placement TEM Figure 6.1

61. Office of Traffic, Safety, and Operations 61 Delineators & Markers

62. Office of Traffic, Safety, and Operations 62 Post Mounted through Surfaced Median or Sidewalk

63. Office of Traffic, Safety, and Operations 63 Type C & D Signs Structural Details TEM Figure 6.3A

64. Office of Traffic, Safety, and Operations 64 Type C & D Signs Structural Details TEM Figure 6.3B

65. Office of Traffic, Safety, and Operations 65 Type C & D Signs Structural Details TEM Figure 6.3C

66. Office of Traffic, Safety, and Operations 66 Type C Delineators & Markers in Concrete

67. Office of Traffic, Safety, and Operations 67 Type C Signs Mounted on O-Posts OH Sign Posts on Signal Standards