1. Chapter 7: Local Area Networks: The Basics Data Communications and Computer Networks: A Business User’s Approach Third Edition

2. Data Communications & Computer Networks: A Business User's Approach, Third Edition2 Objectives State the definition of a local area network List the primary function, activities, and application areas of a local area network Cite the advantages and disadvantages of local area networks Identify the physical and logical topologies of local area networks

3. Data Communications & Computer Networks: A Business User's Approach, Third Edition3 Objectives (continued) Cite the characteristics of wireless local area networks and their medium access control protocols Specify the different medium access control techniques Recognize the different IEEE 802 frame formats Describe the common local area network systems

4. Data Communications & Computer Networks: A Business User's Approach, Third Edition4 Introduction Local area network - communication network Interconnects a variety of data communicating devices within a small geographic area Broadcasts data at high data transfer rates with very low error rates Since the local area network first appeared in the 1970s, its use has become widespread in commercial and academic environments

5. Data Communications & Computer Networks: A Business User's Approach, Third Edition5 Primary Function of a LAN To provide access to hardware and software resources that will allow users to perform one or more of the following activities: File serving - large storage disk drive acts as a central storage repository Print serving - Providing authorization to access a particular printer, accept and queue print jobs, and user access to print queue to perform administrative duties

6. Data Communications & Computer Networks: A Business User's Approach, Third Edition6 Primary Function of a LAN (continued) Video transfers - High speed LANs are capable of supporting video image and live video transfers Manufacturing support - LANs can support manufacturing and industrial environments Academic support – In classrooms, labs, and wireless E-mail support Interconnection between multiple systems

7. Data Communications & Computer Networks: A Business User's Approach, Third Edition7 Advantages of Local Area Networks Ability to share hardware and software resources Individual workstation might survive network failure Component and system evolution are possible Support for heterogeneous forms of hardware and software Access to other LANs and WANs (Figure 7-1) Private ownership Secure transfers at high speeds with low error rates

8. Data Communications & Computer Networks: A Business User's Approach, Third Edition8 Advantages of Local Area Networks (continued)

9. Data Communications & Computer Networks: A Business User's Approach, Third Edition9 Disadvantages of Local Area Networks Equipment and support can be costly Level of maintenance continues to grow Private ownership? Some types of hardware may not interoperate Just because a LAN can support two different kinds of packages does not mean their data can interchange easily A LAN is only as strong as it weakest link, and there are many links

10. Data Communications & Computer Networks: A Business User's Approach, Third Edition10 Basic Local Area Network Topologies Local area networks are interconnected using one of four basic configurations: 1. Bus/tree 2. Star-wired bus 3. Star-wired ring 4. Wireless

11. Data Communications & Computer Networks: A Business User's Approach, Third Edition11 Bus/Tree Topology The original topology Workstation has a network interface card (NIC) that attaches to the bus (a coaxial cable) via a tap Data can be transferred using either Baseband digital signals Broadband analog signals

12. Data Communications & Computer Networks: A Business User's Approach, Third Edition12 Bus/Tree Topology (continued)

13. Data Communications & Computer Networks: A Business User's Approach, Third Edition13 Bus/Tree Topology (continued)

14. Data Communications & Computer Networks: A Business User's Approach, Third Edition14 Bus/Tree Topology (continued) Baseband signals Bidirectional More outward transmitting from the workstation in both directions Broadband signals Usually uni-directional Transmit in only one direction  special wiring considerations are necessary Buses can be split and joined, creating trees

15. Data Communications & Computer Networks: A Business User's Approach, Third Edition15 Bus/Tree Topology (continued)

16. Data Communications & Computer Networks: A Business User's Approach, Third Edition16 Bus/Tree Topology (continued)

17. Data Communications & Computer Networks: A Business User's Approach, Third Edition17 Star-Wired Bus Topology Logically operates as a bus - physically looks like a star Star design based on hub All workstations attach to hub Unshielded twisted pair usually used to connect workstation to hub Hub takes incoming signal and immediately broadcasts it out all connected links Hubs can be interconnected to extend network size

18. Data Communications & Computer Networks: A Business User's Approach, Third Edition18 Star-Wired Bus Topology (continued)

19. Data Communications & Computer Networks: A Business User's Approach, Third Edition19 Star-Wired Bus Topology (continued)

20. Data Communications & Computer Networks: A Business User's Approach, Third Edition20 Star-Wired Bus Topology (continued) Modular connectors and twisted pair make installation and maintenance of star-wired bus better than standard bus Hubs can be interconnected with twisted pair, coaxial cable, or fiber optic cable Biggest disadvantage: when one station talks, everyone hears it  called a shared network All devices are sharing the network medium

21. Data Communications & Computer Networks: A Business User's Approach, Third Edition21 Star-Wired Ring Topology Logically operates as a ring but physically appears as a star Based on MAU (multi-station access unit) which functions similarly to a hub Where a hub immediately broadcasts all incoming signals onto all connected links, the MAU passes the signal around in a ring fashion Like hubs, MAUs can be interconnected to increase network size

22. Data Communications & Computer Networks: A Business User's Approach, Third Edition22 Star-Wired Ring Topology (continued)

23. Data Communications & Computer Networks: A Business User's Approach, Third Edition23 Star-Wired Ring Topology (continued)

24. Data Communications & Computer Networks: A Business User's Approach, Third Edition24 Wireless LANs Not really a specific topology Workstation in wireless LAN can be anywhere as long as within transmitting distance to access point Several versions of IEEE 802.11 standard defines various forms of wireless LAN connections Workstations reside within a basic service set Multiple basic service sets create an extended service set

25. Data Communications & Computer Networks: A Business User's Approach, Third Edition25 Wireless LANs (continued) Two basic components necessary: Client Radio - usually PC card with integrated antenna installed in a laptop or workstation Access Point (AP) - Ethernet port plus transceiver AP acts as bridge between wired and wireless networks Can perform basic routing functions Workstations with client radio cards reside within a basic service set Multiple basic service sets create extended service set

26. Data Communications & Computer Networks: A Business User's Approach, Third Edition26 Wireless LANs (continued)

27. Data Communications & Computer Networks: A Business User's Approach, Third Edition27 Wireless LANs (continued)

28. Data Communications & Computer Networks: A Business User's Approach, Third Edition28 Wireless LANs (continued) IEEE 802.11 – The original wireless standard, capable of transmitting data at 2 Mbps IEEE 802.11b – The second wireless standard, capable of transmitting data at 11 Mbps In actual tests, 11 Mbps 802.11b devices managed 5.5 Mbps (from July 2000 test by Network Computing)

29. Data Communications & Computer Networks: A Business User's Approach, Third Edition29 Wireless LANs (continued) With directional antennae designed for point-to- point transmission (rare), 802.11b can transmit for more than 10 miles With an omni-directional antenna on a typical AP, range may drop to as little as 100 feet

30. Data Communications & Computer Networks: A Business User's Approach, Third Edition30 Wireless LANs (continued) IEEE 802.11a – One of the more recent standards, capable of transmitting data at 54 Mbps using 5 GHz frequency range IEEE 802.11g – The other recent standard, also capable of transmitting data at 54 Mbps but using the same frequencies as 802.11b (2.4 GHz) Backwards compatible with 802.11b

31. Data Communications & Computer Networks: A Business User's Approach, Third Edition31 Wireless LANs (continued) HiperLAN/2 (European standard, 54 Mbps in 5 GHz band) To provide security, most systems use either Wired Equivalent Privacy (WEP) Provides either 40- or 128-bit key protection Or a more advanced standard such as WPA (more on security in Chapter Thirteen) Wireless LANs may also be configured without access point These configurations are called “ad-hoc”

32. Data Communications & Computer Networks: A Business User's Approach, Third Edition32 Wireless LANs (continued)

33. Data Communications & Computer Networks: A Business User's Approach, Third Edition33 Comparison of Bus, Star-Wired Bus, Star-Wired Ring, and Wireless Topologies

34. Data Communications & Computer Networks: A Business User's Approach, Third Edition34 Medium Access Control Protocols How does a workstation get its data onto the LAN medium? Medium access control protocol - software that allows workstations to “take turns” at transmitting data Two basic categories: 1.Contention-based protocols 2.Round robin protocols

35. Data Communications & Computer Networks: A Business User's Approach, Third Edition35 Contention-Based Protocols Essentially first come first served Most common example: Carrier sense multiple access with collision detection (CSMA/CD) If no one is transmitting, a workstation can transmit If someone else is transmitting, workstation “backs off” and waits

36. Data Communications & Computer Networks: A Business User's Approach, Third Edition36 Contention-Based Protocols (continued) If two workstations transmit at the same time Collision occurs When the two workstations hear the collision Stop transmitting immediately Each workstation backs off a random amount of time and tries again Hopefully, both workstations do not try again at the exact same time CSMA/CD: example of non-deterministic protocol

37. Data Communications & Computer Networks: A Business User's Approach, Third Edition37 Contention-Based Protocols (continued)

38. Data Communications & Computer Networks: A Business User's Approach, Third Edition38 Round Robin Protocols Each workstation takes turn transmitting  turn is passed around the network from workstation to workstation Most common example is token ring LAN: Software token is passed from workstation to workstation Token ring: example of deterministic protocol Token ring more complex than CSMA/CD. What happens if token is lost? Duplicated? Hogged? Token ring LANs are losing the battle with CSMA/CD LANs

39. Data Communications & Computer Networks: A Business User's Approach, Third Edition39 Token Ring

40. Data Communications & Computer Networks: A Business User's Approach, Third Edition40 IEEE 802 To better support local area networks, data link layer of the OSI model was broken into two sublayers: 1.Logical link control sublayer 2.Medium access control sublayer Medium access control sublayer defines the frame layout More closely tied to specific medium at physical layer Thus, when people refer to LANs they often refer to its MAC sublayer name, such as 10BaseT

41. Data Communications & Computer Networks: A Business User's Approach, Third Edition41 IEEE 802

42. Data Communications & Computer Networks: A Business User's Approach, Third Edition42 IEEE 802.3 and 802.5 Frame Formats IEEE 802 suite of protocols defines frame formats for CSMA/CD (IEEE 802.3) and token ring (IEEE 802.5) Each frame format describes how data package is formed Note how the two frames are different If a CSMA/CD network connects to a token ring network, frames have to be converted from one to another

43. Data Communications & Computer Networks: A Business User's Approach, Third Edition43 IEEE 802.3 and 802.5 Frame Formats

44. Data Communications & Computer Networks: A Business User's Approach, Third Edition44 IEEE 802.3 and 802.5 Frame Formats

45. Data Communications & Computer Networks: A Business User's Approach, Third Edition45 Local Area Network Systems Ethernet or CSMA/CD Most common form of LAN today Star-wired bus is most common topology but bus topology also available Ethernet comes in many forms depending on: Medium used Transmission speed Technology

46. Data Communications & Computer Networks: A Business User's Approach, Third Edition46 Ethernet Originally, CSMA/CD was 10 Mbps Then 100 Mbps was introduced Most NICs sold today are 10/100 Mbps Then 1000 Mbps (1 Gbps) was introduced 10 Gbps is now beginning to appear

47. Data Communications & Computer Networks: A Business User's Approach, Third Edition47 Ethernet (continued) 1000 Mbps introduces a few interesting wrinkles: Transmission is full duplex (separate transmit and receive)  no collisions Prioritization is possible using 802.1p protocol Topology can be star or mesh (for trunks)

48. Data Communications & Computer Networks: A Business User's Approach, Third Edition48 Ethernet (continued) Cabling can be either UTP or optical 10 Gbps Ethernet may not work over UTP due to radio frequency interference Where 10 Mbps Ethernet has less than 30% utilization due to collisions 1000 Mbps is limited only by traffic queueing Distance with 10 Mbps is limited by CSMA/CD propagation time 1000 Mbps limited only by media

49. Data Communications & Computer Networks: A Business User's Approach, Third Edition49 Ethernet (continued)

50. Data Communications & Computer Networks: A Business User's Approach, Third Edition50 IBM Token Ring Deterministic LAN offered at speeds of 4, 16 and 100 Mbps Very good throughput under heavy loads More expensive components than CSMA/CD Losing ground quickly to CSMA/CD May be extinct soon

51. Data Communications & Computer Networks: A Business User's Approach, Third Edition51 Fiber Distributed Data Interface (FDDI) Based on token ring design using 100 Mbps fiber connections Allows for two concentric rings Inner ring can support data travel in opposite direction or work as backup Token is attached to outgoing packet, rather than waiting for outgoing packet to circle entire ring

52. Data Communications & Computer Networks: A Business User's Approach, Third Edition52 Fiber Distributed Data Interface (FDDI)

53. Data Communications & Computer Networks: A Business User's Approach, Third Edition53 LANs In Action: A Small Office Solution What type of system will interconnect twenty workstations in one room and fifteen workstations in another room to a central server, offering: Internal e-mail A database that contains all customer information High quality printer access

54. Data Communications & Computer Networks: A Business User's Approach, Third Edition54 LANs in Action: A Small Office Solution (continued)

55. Data Communications & Computer Networks: A Business User's Approach, Third Edition55 LANs in Action: A Small Office Solution (continued)

56. Data Communications & Computer Networks: A Business User's Approach, Third Edition56 LANs in Action: A Home Office Solution What if you have two computers at home and want both to share a printer and connection to the Internet? Some type of Small Office/Home Office (SOHO) solution might solve this problem LAN with 2- or 3-port hub, connecting cables, and software In some models, hub also acts as a router to the Internet

57. Data Communications & Computer Networks: A Business User's Approach, Third Edition57 LANs in Action: A Home Office Solution (continued)

58. Data Communications & Computer Networks: A Business User's Approach, Third Edition58 Summary Local area networks Medium access control techniques IEEE 802 frame formats