1. 6 th Annual Sucker Rod Pumping Workshop Wyndham Hotel, Dallas, Texas September 14 – 17, 2010 Focus on Sucker Rod Pumping Technology, Information, Automation, Experiences

2. Sept. 14 - 17, 2010 2010 Sucker Rod Pumping Workshop2 Copyright Rights to this presentation are owned by the company(ies) and/or author(s) listed on the title page. By submitting this presentation to the Sucker Rod Pumping Workshop, they grant to the Workshop, the Artificial Lift Research and Development Council (ALRDC), and the Southwestern Petroleum Short Course (SWPSC), rights to: –Display the presentation at the Workshop. –Place it on the www.alrdc.com web site, with access to the site to be as directed by the Workshop Steering Committee. –Place it on a CD for distribution and/or sale as directed by the Workshop Steering Committee. Other use of this presentation is prohibited without the expressed written permission of the author(s). The owner company(ies) and/or author(s) may publish this material in other journals or magazines if they refer to the Sucker Rod Pumping Workshop where it was first presented.

3. Sept. 14 - 17, 2010 2010 Sucker Rod Pumping Workshop3 Disclaimer The following disclaimer shall be included as the last page of a Technical Presentation or Continuing Education Course. A similar disclaimer is included on the front page of the Sucker Rod Pumping Web Site. The Artificial Lift Research and Development Council and its officers and trustees, and the Sucker Rod Pumping Workshop Steering Committee members, and their supporting organizations and companies (here-in-after referred to as the Sponsoring Organizations), and the author(s) of this Technical Presentation or Continuing Education Training Course and their company(ies), provide this presentation and/or training material at the Sucker Rod Pumping Workshop "as is" without any warranty of any kind, express or implied, as to the accuracy of the information or the products or services referred to by any presenter (in so far as such warranties may be excluded under any relevant law) and these members and their companies will not be liable for unlawful actions and any losses or damage that may result from use of any presentation as a consequence of any inaccuracies in, or any omission from, the information which therein may be contained. The views, opinions, and conclusions expressed in these presentations and/or training materials are those of the author and not necessarily those of the Sponsoring Organizations. The author is solely responsible for the content of the materials. The Sponsoring Organizations cannot and do not warrant the accuracy of these documents beyond the source documents, although we do make every attempt to work from authoritative sources. The Sponsoring Organizations provide these presentations and/or training materials as a service. The Sponsoring Organizations make no representations or warranties, express or implied, with respect to the presentations and/or training materials, or any part thereof, including any warrantees of title, non-infringement of copyright or patent rights of others, merchantability, or fitness or suitability for any purpose.

4. Sept. 14 – 17, 2010 2010 Sucker Rod Pumping Workshop4 General Chairman Brent Thomas Brent focuses in low volume lift methods, primarily rod pumping and plunger lift with quite a bit of experience in capillary tubing. Operations and workover and recompletion duties are other areas that he has performed. The importance of Gas Well Deliquification and the value of mature oil and gas well properties and the inherent problems associated with their operation has been a big part of his career. Brent also has considerable experience in horizontal well development in fields such as the Barnett and fields requiring hydraulic fracturing. Well failure analysis and improvement recommendations are also areas of interest. Heavy oil and steam flood projects comprise a big part of his current activities. Brent has been a session chair at both the Gas Well Deliquification workshops and the Sucker Rod workshop in the past and provides internal training on rod pumping, plunger lift and corrosion surveillance within Chevron.

5. Sept. 14 – 17, 2010 2010 Sucker Rod Pumping Workshop5 Keynote Speaker Denny Bullard Denny Bullard is Vice President of Operations Services with Pioneer Natural Resources. He is responsible for the corporate engineering groups overseeing drilling and completion activities, facilities design, gas processing, and utilities. He is also responsible for health, safety and environmental services, operational training and procurement. From December 2005 through October 2007, he served as Vice president of Engineering and Development and from October 2004 until November 2005 as Vice President, Gulf Coast Operations. From 1997 to 2004 he was the Operations Manager for Pioneer’s Gulf Coast Operations. Bullard has a Bachelor of Science degree in Petroleum Engineering from Texas Tech University. He serves on the Texas Tech University Industry Advisory Board for Petroleum Engineering and is Chairman of the Texas Tech University Academy of Petroleum Engineers.

6. Sept. 14 – 17, 2010 2010 Sucker Rod Pumping Workshop6 Gal Friday Ronda Brewer Southwestern Petroleum Short Course and ALRDC Very special thanks to Ronda Brewer. Without her hard work and dedication, this Workshop couldn’t come together as well as it does. Thank You!

7. Sept. 14 – 17, 2010 2010 Sucker Rod Pumping Workshop7 Continuing Education Courses Course 101 --- Basic Sucker Rod Pumping –Tom vanAkkerenTues: 8:00 – 5:00Wright Room Course 102 --- Shooting and Interpreting Fluid Levels in Sucker Rod Wells –Lynn RowlanTues : 8:00 – 5:00Lindbergh 1 Course 103 --- Troubleshooting & Problem Analysis in Sucker Rod Wells –Lynn RowlanWed: 8:00 – 5:00 Lindbergh 1 Course 104 --- Teardown Procedures and Analysis for Sucker Rod Wells –B. Williams, R. Stevens Wed: 8:00 – 5:00 Wright Room

8. Sept. 14 – 17, 2010 2010 Sucker Rod Pumping Workshop8 Continuing Education Courses Course 201 --- Sucker Rod String System Design –Norm HeinTues & Wed: 8:00 – 5:00Lindbergh II Course 202 --- Automation and Well Problem Identification and Solutions –L. Ray, G. HurstTues & Wed: 8:00 – 5:00Bond Room

9. Sept. 14 – 17, 2010 2010 Sucker Rod Pumping Workshop9 Technical Sessions INew Technology, R&D –Thursday: 7:55 – 12:00 Lindbergh Room –Chairs: Tom van Akkeren IIDesign, Automation, Optimization, Challenges –Thursday: 1:30 – 4:00 Lindbergh Room –Chair: Mike Brock III Case Histories, Experiences, Best Practices –Friday: 7:55 – 12:00 Lindbergh Room –Dave Watts All sessions in Lindbergh Room

10. Sept. 14 – 17, 2010 2010 Sucker Rod Pumping Workshop10 Breakout Sessions IWhat new novel sucker rod pumping technology is needed, is coming? –Thursday: 4:30 – 6:00 –Room: Lindbergh I –Facilitator: Brent Thomas IIPumping wells completed in shale formations –Thursday: 4:30 – 6:00 –Room: Bond Room –Facilitator: Juan Ortegon IIIPumping wells with sand, solids, scale –Thursday: 4:30 – 6:00 –Room: Wright Room –Facilitator: Benny Williams

11. Sept. 14 – 17, 2010 2010 Sucker Rod Pumping Workshop11 Workshop Sponsors Artificial Lift R&D Council Norris Sucker Rod South Western Petroleum Short Course

12. Sept. 14 – 17, 2010 2010 Sucker Rod Pumping Workshop12 Workshop Sponsors Texas Tech. Dept. of Petroleum Engineering

13. Sept. 14 – 17, 2010 2010 Sucker Rod Pumping Workshop13 Workshop Exhibitors Echometer John Crane Production Solutions Norris Sucker Rod Quinn

14. Sept. 14 – 17, 2010 2010 Sucker Rod Pumping Workshop14 Workshop Exhibitors Rod Lift Consultants Samson Pump SPOC Automation UPCO, Inc.

15. Sept. 14 – 17, 2010 2010 Sucker Rod Pumping Workshop15 Workshop Exhibitors Weatherford Western Falcon

16. Sept. 14 – 17, 2010 2010 Sucker Rod Pumping Workshop16 Workshop Meals & Events Tuesday Continuing Education (8:00 – 5:00) ALRDC Board Meeting (5:30 pm, at Workshop Hotel) Wednesday Continuing Education (8:00 – 5:00) Reception (5:15 – 7:00) Thursday Technical Session (7:55 – 12:00) Lunch (12:00 – 1:00) Keynote Address (1:00 – 1:30) Technical Session (1:30 – 4:00) Breakout Sessions (4:30 – 6:00) Friday Technical Session (7:55 – 12:00) Door prizes (12:00 – 12:10) Lunch (12:10 – 1:30) Steering Committee (12:10 – 1:30)

17. Sept. 14 – 17, 2010 2010 Sucker Rod Pumping Workshop17 Presentations on the Web Use the ALRDC Web Site www.alrdc.com –Go to: Workshops Fall 2010 Sucker Rod Presentations (or Breakouts) Access Code: 20147C9