1. How to Connect the Power and Interface (Communication) Cables
Cabling a Rackmounted 9910-P33 UPS i5 or p5 with one PDU or two (redundant) PDUs
How to Connect the Power and Interface (Communication) Cables
World Trade (WT)

2. Receiving the Rack UPS will be installed in rack
If selected “Rack Install” features in the configurator
Connections that need to be completed
Power
UPS to utility (mains)
UPS to PDU / Devices
Interface (communications)
UPS to server(s)

3. Getting Acquainted with the P33
Location of UPS
Installed at bottom of rack
Connections rear of rack
What a P33 UPS looks like from the rear

4. Line cords & connectors
C13 connector- 10A rated (female)
Rack, HD & E PDU outlets
Mating connector to server used on
P33 and PDU Outlets
C14 connector- 10A rated (male)
The inlet on most servers & options
Rack jumper cords
C19 connector- 16A rated (female)
P33 Outlet
C20 connector- 16A rated (male)
P33 inlet and Part of BladeCenter line cord
Lower number is female. Power flows from female to male.

5. to one PDU - non- redundant
Power Cabling with one PDU & #9855 to 16A Plug
Server power cables
to one PDU - non- redundant
520 or 550 with
Redundant Power
supplies #5158 or
#7889 being fed
by non-redundant
power source
PDU #7188 or
#9188
PDU line
cord #6656
Customer
supplied
receptacle
varies
UPS input
line cord PN
varies
UPS output
line cord PN
53P1968
(1/2 of #9855)
This example shows
a server with redundant
power supplies being
powered by one PDU.
Therefore, this installation
is classified as non-
redundant
POWER CORD TABLE
FC Description
CEE7 VII Type 18
SABS 164 Type 22
CEI Type 25
IEC309 P+N+G 16A Type 46
SII Type 32
SAA-AS 3112 Type 54
IEC A5 Type 64

6. to one PDU - non- redundant
Power Cabling with one PDU & #9855 to 32A Plug
Server power cables
to one PDU - non- redundant
520 or 550 with
Redundant Power
supplies #5158 or
#7889 being fed
by non-redundant
power source
PDU #7188 or
#9188
PDU line
cord #6656
Customer
supplied
receptacle
IEC309
P+N+G 32A
UPS input
line cord PN
53P1969
(1/2 of #9855)
UPS output
line cord PN
53P1968
(1/2 of #9855)
PDU line
cord #1449
PN 21H7693
This example shows
a server with redundant
power supplies being
powered by one PDU.
Therefore, this installation
is classified as non-
redundant

7. Power Cabling with two PDUs
2nd or
redundant PDU
Server power cables
to two redundant PDUs
PDU #7188 or
#9188
PDU line
cord #6656
Customer
supplied
receptacle
IEC309
P+N+G 32A
520 or 550 with
Redundant Power
supplies #5158 or #7889
being fed by redundant
power source
UPS input
line cord
PN 53P1969
UPS output
line cord
PN 53P1968
(1/2 of #9855)
Redundant
PDU line
cord #6656
Customer
supplied
receptacle
IEC309
P+N+G 32A
UPS input line cord
shown using 30/32A
plugs as an example
only.
PDU line
cord #1449
PN 21H7693

8. Interface Cabling i5 to P33
Install i5 UPS
Interface
Cable #1827
(included with i5)
Install UPS to #1827
Interface Cable PN
(included with #2936)
520 or 550
UPS port
P1-T1
Follow Relay Card Quick Start Guide directions to set UPS monitoring functions in i5 OS
Install X-Slot
Relay Card
#2936

9. Install UPS Interface Cable
Interface Cabling iSeries to P33
Install UPS Interface Cable PN
(included with #2936)
8xx Series
UPS port
“J14” or ”UPS”
Follow Relay Card Quick Start Guide directions to set UPS monitoring functions in OS/400 OS
Install X-Slot
Relay Card
#2936

10. Interface Cabling i5 & serial to P33
Install i5 UPS
Interface
Cable #1827
(included with i5)
Install LanSafe Software
(contained on CD)
onto server
Install UPS to #1827
Interface Cable PN
(included with #2939)
520, 550 or 570
UPS port
P1-T1
Serial (TTY)
server
Follow Relay / Serial Card Quick Start Guide directions to set UPS monitoring functions in i5 OS and serial (TTY) server.
Install UPS to serial Interface Cable PN
(with #2939)
Install X-Slot
Relay / Serial
Card #2939

11. Interface - p5 Options Serial (Non-LPAR)
One to three serial connections possible
LPAR (Logical PARtitions of the p5 Operating System)
Requires a p5 Ethernet connection
Must use #2934 Web/SNMP card

12. Interface (Serial) p5 p5 520 or 550 NOTE: Must
NOTE: Obtain Maintenance
package (APAR IY66260) for AIX 5.2L V5.2
and the maint. Pkg. For AIX 5.3L V5.3
(APAR IY62267) from IBM
Install UPS serial Interface Cable PN
(contained in P33 Accessory
Kit PN 21P7229)
Install LanSafe Software
(contained on CD)
onto p5
p5 520 or 550 NOTE: Must
have 2-port Asynchronous
EIA PCI Adapter #5723
Follow Multi-Server
User’s Guide to set
UPS monitoring functions
Multi-Serial Card shown.
Your P33 may have a
single serial port card.

13. Interface for LPARs (Ethernet) p5
Install NetWatch Software
(contained on CD)
onto each LPAR
Install Ethernet
Cable - customer
supplied
p5 520 or 550 NOTE:
Must have Ethernet Port
Follow ConnectUPS
Web/SMMP User’s Guide to set UPS monitoring functions
Install ConnectUPS
Web/SNMP Card
#2934

14. Completing Start-Up
You have finished the power and connectivity installation process
Continue with Start-up instructions in User’s Manuals
Questions? Contact:
The local IBM office supporting your account
Eaton Power Quality Global Services