1. 8000 Series Options/Technical Overview

2. 8000 Series Precision Digital Multimeter New Technology – Multi Processor design No need for AutoCal – High precision components used throughout the unit Accuracy – 4/9ppm basic accuracy models Extended Workload – High Current, High Resistance Transmille Ltd 1997 - 2011

3. High Performance Temperature Functions Ability to scan between both Front and Rear panel Inputs automatically Built in conversion for both ITS-90 and IEC751 Auto CJC (Cold Junction Compensation) for Thermocouple Input Single and Dual Probe Configuration

4. Advanced Math Functions Auto calculation of Accuracy (based on unit specification) Dynamic Uncertainty calculation Standard Deviation Minimum/Maximum Reading display

5. Dedicated Electrometer Inputs (8081) Screened input connections for High Resistance measurements to 1TOhm Low Current measurement to 0.01pA Selectable Electrometer voltage from 50V to 300V

6. Series Overview Function807180808081 DC Volts 0-1000V9ppm4ppm AC Volts 0-1000V0.045%0.015% DC Current35ppm9ppm AC Current0.08%0.03% Resistance 10Ω – 10MΩ 25ppm9.5ppm Resistance 1Ω – 1TΩ XX ✓ Temperature (PRT and Thermocouple) XX ✓ Advanced Maths Functions XX ✓ Transmille Ltd 1997 - 2011

7. 8000 Series Options Phase – Extend the workload of the 8000 series multimeter by adding Phase measurement TCLEAD – Automated CJ read back, take the guess work out of measuring Thermocouples Pressure – Use the 8000 series with Transmille’s TPA pressure modules 8500 10 Channel Low Thermal Scanner – Ideal for Thermometry applications or ratio between multiple sources ProGraph Software – Simple, Easy to use logging software with full built in control for 8000 series DMM and 8500 Scanner Soft & Transit Cases – Custom designed soft and hard cases to protect your investment Transmille Ltd 1997 - 2011

8. 8000 Series Key Features Resistance – Extended range and accuracy from competing products, accurate & low noise high ohms measurements now possible User Friendly Operation – Direct access to the most commonly used functions Dual VFD Display – Display information relating to the measurement while never losing sight of the measurement, clear and easy to read MultiInterface – Units fitted with RS232, GPIB, LAN and USB as STANDARD! No matter what environment no new interfaces will need to be purchased Transmille Ltd 1997 - 2011

9. Ease of Calibration – Full access to all calibration points through the front panel, adjust a single point or an entire range without removing the case of the unit Terminal Indicators – Clearly identifies the correct connections Electrometer Functionality – Unique option for bench top multimeters Transmille Ltd 1997 - 2011

10. Automatic Calculation Of Measurement Uncertainty – Using noise/flicker, specification and imported uncertainty data the 8000 series can automatically calculate and display the measurement uncertainty Superior low noise performance – high performance low level measurements Programmable Front/Rear Terminals & Guard – simplifies automation with full control of all functions Ratio Functions – Ratio between front and rear terminals automatically to use as high accuracy resistance bridge Transmille Ltd 1997 - 2011

11. AC/DC Current to 30A – Perform full calibration of modern multi product calibrators without the need for current shunts Low Current Resistance Measurement – Suitable for temperature applications where self heating must be minimal Transmille Ltd 1997 - 2011

12. Unique measurement functions – Shunt measurement function measures both current and voltage across current shunt simultaneously Dynamic Filter Capability – 8000 series features a dynamic filter, increasing the sample time automatically when a stable source is detected Transmille Ltd 1997 - 2011

13. 88xx Series Offering a unique product, the 88xx series provide customers with low cost Multimeter for specific tasks DCV only base units, with ACV, DCI, ACI and Resistance as configurable options Ideal for specialised applications, i.e. ATE systems, monitoring systems Transmille Ltd 1997 - 2011