1. Presented by: 15 Oct 2001 Neptec Laser Camera System Preliminary Post Flight Results Neptec Design Group

2. Presenter Date 15 October 2001 Preliminary Post Flight Results © 2001 - Neptec Design Group LCS on STS 105 - DTO Objectives  Demonstrate:  The ability of the LCS to produce 3D digital images from data acquired on orbit  That the LCS data is immune to dynamic lighting conditions  That the LCS can generate 3D target centroid data that will allow OSVS to provide accuracy performance equivalent to CTVC

3. Neptec Design Group Presenter Date 15 October 2001 Preliminary Post Flight Results © 2001 - Neptec Design Group Post Flight Analysis Progress  Post Flight Analysis is on going  Analysis of the first two objectives shows that they have been met.  Analysis of the third objective is on going  This presentation provides and interim progress report for public release  Further interim reports will be released as data becomes available  A full report in document form will be generated when analysis is complete.

4. Neptec Design Group Presenter Date 15 October 2001 Preliminary Post Flight Results © 2001 - Neptec Design Group Contents of This Report  Description of Flight Data Acquired  High Resolution Intensity Image  High Resolution Range map  3D Modeling using LCS Data  Detailed Study of Canadarm 2  Demonstration Immunity to Lighting Conditions  Preliminary Analysis of Range Data  Summary

5. Neptec Design Group Presenter Date 15 October 2001 Preliminary Post Flight Results © 2001 - Neptec Design Group Flight Data Summary  The Following Data was Acquired:  2x 512x512 “Field of View” images No range data  4 x 1024x1024 high resolution images Intensity and Range Maps  Over two hours of target centroid data  Analysis  The quality of acquired images is high  The image data appears to be immune to lighting conditions  3D model creation from range data is in progress  Centroid target analysis is on-going

6. Neptec Design Group Presenter Date 15 October 2001 Preliminary Post Flight Results © 2001 - Neptec Design Group Intensity Map  The following page shows a picture which has been constructed from the average of the 4 images acquired by the LCS on orbit  This image looks like a standard camera picture, but actually consists of a grid of 1024x1024 separate (and sequential) intensity measurements  Since only the intensity data is included in this image, it is referred to as the “Intensity Map”  The preflight model of the expected Field of View is shown for reference  Note that the image has been scaled by 50% to fit this presentation

7. © 2001 Neptec Design Group

8. Presenter Date 15 October 2001 Preliminary Post Flight Results © 2001 - Neptec Design Group Image Details  Close up of MSS Camera  Soyuz Solar Arrays  FGB and FGB Arrays (image contrast enhanced)  Range > 35m

9. Neptec Design Group Presenter Date 15 October 2001 Preliminary Post Flight Results © 2001 - Neptec Design Group Range Map  In addition to the intensity data LCS also acquired range maps for each high resolution image  The data is shown in grey scale image form on the first page. On this page lighter data denotes points closer to the camera  Note that, as the camera was hard mounted in the shuttle payload bay, the data represents a snapshot from a single fixed position  The blue sections show points for which no signal was returned  The areas for which there is no data are largely those which have specular reflecting surfaces which are angled away from the camera in its fixed location in the payload bay  This effect, and possible mitigation techniques will be discussed in the final analysis report

10. © 2001 Neptec Design Group

11. Presenter Date 15 October 2001 Preliminary Post Flight Results © 2001 - Neptec Design Group 3D Modeling using LCS data  The Next two slides show 3D visualizations of the the LCS range data. The data shown in these pictures are not “true” 3D models but rather just raw range data placed in space. This is also known as “point cloud” data  The first page shows the entire set of range data points from approximately the orginal camera perspective  The second page shows a closeup of a segment of the lab module from two different perspective. Note how SVS targets which appear as elongated ovals from the original camera point of view are revealed to be circular when the model is rotated.

12. Neptec Design Group Presenter Date 15 October 2001 Preliminary Post Flight Results © 2001 - Neptec Design Group © 2001 Neptec Design Group

13. Presenter Date 15 October 2001 Preliminary Post Flight Results © 2001 - Neptec Design Group © 2001, Neptec Design Group Target which is oval in initial view is circular when view is rotated

14. Neptec Design Group Presenter Date 15 October 2001 Preliminary Post Flight Results © 2001 - Neptec Design Group Detailed Study - Canadarm 2  The three pictures on the next page show one possible method of combining the range and image data.  The top picture shows the image map  The second photo is the range map (with the grey scale enhanced to show small range differences on the arm)  The third picture shows the intensity map which has been overlaid on a rendered version of the greyscale range map. (The rendering simulates a light source from the top right of the photo)  The second and third pages show the 3D point cloud data for the arm and for the MSS camera in detail. Note the separation of the cable run from the background structure of the arm

15. Neptec Design Group Presenter Date 15 October 2001 Preliminary Post Flight Results © 2001 - Neptec Design Group © 2001 Neptec Design Group

16. Presenter Date 15 October 2001 Preliminary Post Flight Results © 2001 - Neptec Design Group © 2001 Neptec Design Group

17. Presenter Date 15 October 2001 Preliminary Post Flight Results © 2001 - Neptec Design Group © 2001 Neptec Design Group

18. Presenter Date 15 October 2001 Preliminary Post Flight Results © 2001 - Neptec Design Group Immunity To lighting conditions  The following page shows two images taken by the LCS.  The image on the left was acquired entirely during orbital daylight.  The image on the right was acquired entirely during orbital night  The images have been processed using identical adjustments to brightness, contrast and gamma  Also included are two greyscale histograms showing the number of pixels at each grey level in the original images.  The images are identical qualitatively and quantitatively  This is evidence that LCS imaging is unaffected by ambient lighting conditions on orbit.

19. NightDay

20. Neptec Design Group Presenter Date 15 October 2001 Preliminary Post Flight Results © 2001 - Neptec Design Group Quantitative Analysis of Range Data  The Histogram on the following page shows the distribution of range data acquired by the LCS for one high resolution image  The following page shows the same histogram with a logarithmic scale which enhances lower count data  Notes  The data ranges from 5 m (the near end of the Lab) to greater than 35 m (The FGB and FGB solar arrays)  The fact that the Soyuz module is rotated is evident from the fact that the Soyuz Solar arrays are at different ranges.

21. Neptec Design Group Presenter Date 15 October 2001 Preliminary Post Flight Results © 2001 - Neptec Design Group

22. Neptec Design Group Presenter Date 15 October 2001 Preliminary Post Flight Results © 2001 - Neptec Design Group

23. Neptec Design Group Presenter Date 15 October 2001 Preliminary Post Flight Results © 2001 - Neptec Design Group Summary  Post Flight data in support of all DTO objectives was successfully retrieved from the LCS  Analysis is on going  The Imaging DTO objective has been met. Unit performance has already exceeded expectations with range data returned from objects in excess of 35m from camera  Lighting immunity has been demonstrated in 3D imaging mode