1. Cebo. Ndlangamandla Synthesis of Iron Oxides nanorods for water splitting application Energy Postgraduate Conference 2013 iThemba LABS/ UniZulu

2. OUTLINE Introduction What has been done Why Iron Oxide? Experimental Approach Results Discussion Conclusion

3. Energy Crisis: The world’s economy depend on fossil fuel and countries without fossil fuel depend to those with it. Very Expensive so renewable Energy (cheap) is a need. Non-Renewable Resources for the Production of Energy are limited. Global warming: is due to the continuous emission of green house gases. so environmental friendly energy production systems are needed. The Fossil fuel need to be substituted INTRODUCTION

4. Nanosystems for water splitting Photo catalysis of water first reported by Honda and co-worker in 1970 and now has received interest since it offers a renewable nonpolluting approach of hydrogen production. US DEO’s target for photo electrochemical hydrogen production for solar hydrogen conversion efficiency is (8% by 2010 and 10% by 2015).  Solar Hydrogen at Tungsten Trioxide, Vaysseries et al (2001)  Solar Hydrogen at Titanium Dioxide, Honda et al (1970)  Solar Hydrogen at nano-composite semiconductors, Yoshihiro et al (2006)  Hydrogen System nanodevices, Vaysseries et al (2005)  Hydrogen System on ZnO, Levey-Clement et al (2003) In all systems, the efficiency is still less than 6%

5. Pt Counter electrode e-e- Ag/AgCL reference electrode e- h+h+ H2OH2O H2H2 O2O2 300W Xe-Lamp or Solar Simulator Photoelectrode Potentiostat Principle of water splitting

6. M. Gratzel et al, ChemSusChem (2011)

7. Challenges  Carrier transport  Valence Band Edge  Water Oxidation Kinetics  Low optical absorption Promise  Band gaps ~ 2.2 eV (it absorb up to 40% of solar light).  Abundant and inexpensive  High Stability in electrolytes  Thermodynamically stable. Iron Oxide is a commonly-found material with band gap well-suited for the direct solar water splitting of water but its performance has been severely limited by opto-electronic properties. This material is promising because of Photo Oxidation of water for hydrogen production, transparent electronics applications. PEC increase  Growth of crystalline Oxide  Direct growth along the preferred electron conduction paths (orientation)  High surface area material Shift of Band Position  Quantum size effect  Transition metal doping Iron Oxide

8. -4 -5 -6 -7 -8 0 1 2 3 2.2 eV 3.0 eV 2.8 eV 3.2 eV E/eV Fe 2 O 3 TiO 2 rutile WO 3 ZnO H 2 /H + H 2 O/O 2

9. BACK CONTACT IN DEFERENT MORPHOLOGY e e ee SUN

10. EXPERIMENTAL APPROACH ACG uses simple equipments, low temperature deposition and the reaction is less hazardous, Template-less, Surfactant-free and there is no need to use the metal catalysts. The size, shape and the orientation of the nanostructure can be easily being tailored. The coverage and the growth of the nanostructures on the substrate can be monitored. An aqueous solution of FeCl 3 and NaNO 3 is used and parameters such as Time, pH can be controlled. 95 o C was used for deposition.

11. Synthesis (Aqueous Chemical growth) Vaysseries et al (2001)

12. SEM images of doped and undoped Fe 2 O 3 nanorods grown onto FTO.

13. X-RAY POWDER DIFFRACTION (XRD). Hematite has a trigonal/rhombohedra structure with approximately hexagonal close-packed array of oxygen. Fe 3+ ions occupy two thirds of octahedral sites between oxygen’s each FeO 6 octahedron shares a face with another in the layer above or below. Iron atoms lie on planes spaced approximately one third and two-thirds the distance between oxygen layers. Belong to the space group R-3C. Vayssieres et al, Adv. Mater.,Vol 17, 2320-2323

14. RAMAN MEASUREMENTS Raman Study on Hematite samples modes Beattie et al 1970 (cm -1 ) Massey et al 1990 (cm -1 ) Shim et al 2001 (cm - 1 ) This Study (cm -1 ) A1g(1)226228224219 A1g(1)245246243 A1g(1)293294290293 A1g(1)298300297388 A1g(1)413412408 A1g(2)500496 A1g(1)612614609608 Eu659658 2Eu132013161312

15. Optical measurements of Fe 2 O 3 thin film deposited on FTO.

16. CONCLUSION Randomly perpendicular oriented nanorods were obtained by adjusting the solution pH. This orientation is preferred to avoid recombination. Spherical may not provide a good electrical pathway for the photo-generated electron to travel to the FTO back contact. The band gap of hematite can be tailored by growth parameters such doping.